Where is the fuse for the Besturn X80 horn located?

1 Answers
WilliamRose
07/30/25 3:11am
The fuse for the Besturn X80 horn is located in the fuse box on the right side of the engine compartment. Classification of automotive fuse boxes: Automotive fuse boxes are used to install car fuses and can be classified according to the size of the fuses installed, including small automotive fuse boxes, medium automotive fuse boxes, and large automotive fuse boxes. Different locations of automotive fuse boxes: There are generally two fuse boxes in a car. One is located on the right side of the engine compartment, mainly responsible for the safety of external electrical components such as the ECU, windshield washer fluid, lights, horn, ABS, etc. The other is located on the lower left side of the steering column, primarily responsible for the normal operation of internal electrical components such as the cigarette lighter, power windows, electric seats, and airbags.
Was this review help?
20
3
Share
More Forum Discussions

Is it acceptable to delay the vehicle inspection by one month?

Delaying the annual vehicle inspection by one month constitutes an inspection lapse, and the vehicle is not permitted to be driven on the road. Once the inspection is overdue, the vehicle registration system will mark its status as 'inspection overdue.' If the vehicle is still driven under these circumstances, it violates regulations. If caught, the driver will face a fine, a 3-point penalty, and possible vehicle impoundment. The correct course of action is to promptly arrange for a supplementary inspection. However, do not rely on luck—the proper procedure is to have the vehicle towed to the vehicle management office for the overdue inspection. Additional relevant information is as follows: 1. Annual inspection participation: Vehicles can undergo the annual inspection up to 3 months before the deadline. 2. Inspection deadline: The inspection deadline can be found on the supplementary page of the vehicle's registration certificate, which states the validity period until a specific month and year. For example, if the registration certificate states 'Inspection valid until July 2018,' the inspection must be conducted within May, June, or July—meaning the earliest inspection date is May 1st, and the latest is July 31st.
14
4
Share

What gear should be engaged when parking without turning off the engine?

Parking without turning off the engine requires different gears depending on the situation: 1. For automatic transmission models: If the driver is in the car, shift to N (Neutral) gear and engage the handbrake; if the driver is not in the car, engage the handbrake and shift to P (Park) gear. If the vehicle has an automatic start-stop system and the stop is very brief (e.g., waiting at a traffic light), simply keep the gear in D (Drive) and press the brake pedal. 2. For manual transmission models, shift to neutral and either press the brake pedal or engage the handbrake. The car gears include: 1. P (Park) gear: After parking the car, engaging P gear prevents the vehicle from moving; 2. R (Reverse) gear: This gear can only be engaged when the vehicle is stationary; 3. N (Neutral) gear: Used for temporary parking, but should not be used when going downhill; 4. D (Drive) gear: Used for forward movement, with gear shifts controlled by the accelerator pedal.
15
4
Share

Should an automatic transmission start in P gear or N gear?

Many automatic transmission cars start directly in P gear, and it is not possible to start in N gear. The N gear and P gear of the vehicle's automatic transmission can basically be used when parking, but there is a difference between N gear and P gear. The N gear does not have a locking mechanism. When the N gear is engaged without pulling the handbrake, the vehicle can move. The P gear has a locking mechanism. When the P gear is engaged, the locking mechanism locks the gear of the transmission, which is equivalent to indirectly locking the wheels. At this time, the vehicle cannot move without pulling the handbrake. Correct habit: Before shifting into P gear, you must ensure that the vehicle is completely stopped, otherwise it will damage the locking mechanism of the P gear. When driving an automatic transmission car, you should not shift into N gear to coast, as this will affect the lubrication and heat dissipation of the automatic transmission. If you coast in N gear for a long time and over a long distance, it may immediately cause the automatic transmission to burn out. In daily use, it is necessary to maintain good usage habits, as good usage habits can extend the service life of the vehicle.
3
1
Share

How to Fold Down the Rear Seats of the Elantra?

The method to fold down the rear seats of the Elantra is as follows: 1. Move the front seats forward; 2. Fold up the rear seat armrest; 3. Store the rear seatbelt buckles properly; 4. Adjust the headrests to a lower position; 5. Pull the folding switch located at the shoulder of the rear seat. More details about the Elantra are as follows: 1. The Elantra is a compact car with body dimensions of 4510 mm in length, 1765 mm in width, and 1470 mm in height, a wheelbase of 2650 mm, and a fuel tank capacity of 50 liters. 2. The Elantra is equipped with a 1.6-liter naturally aspirated engine, delivering a maximum power of 90.2 kW and a maximum torque of 150.7 Nm. 3. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
18
4
Share

What to Do When a Golf Fails to Start?

Golf failing to start may be due to a dead battery, obstructed fuel flow, or poor ignition system performance. Below are the relevant explanations for a Golf failing to start: (1) Dead battery: The starter begins to turn but lacks sufficient speed or power, eventually making only a clicking sound without turning. Low temperatures in winter and forgetting to turn off certain electrical devices can prevent the vehicle from starting, especially after prolonged short-distance, low-speed usage in winter, causing the battery voltage to drop below the rated value, making starting and normal operation impossible. (2) Obstructed fuel flow: No fuel pressure in the engine's fuel supply line. This situation often occurs on extremely cold mornings, caused by long-term dirt accumulation in the fuel lines. When temperatures are extremely low, water and debris mix, blocking the fuel lines and preventing the engine from starting. (3) Poor ignition system performance: On very cold days, due to low intake air temperature, fuel atomization in the cylinders is poor. If combined with insufficient ignition energy, this can lead to cylinder flooding, where excessive fuel accumulates in the cylinders, exceeding the ignition limit concentration and preventing the engine from starting.
8
4
Share

Can I take the driving test for Subject 3 if I lost my ID card?

Before the Subject 3 test, the authenticity and validity of the trainee's information need to be verified, which includes ID card verification. If the ID card is expired or lost, the test cannot be taken. More relevant information is as follows: 1. Report to the vehicle management office in advance: If you lose your ID card, it is best to report it to the driving school or vehicle management office in advance and ask if other valid documents (such as a residence permit) can be used. If not, please apply for a replacement ID card as soon as possible. If it is urgently needed, you can apply for a temporary ID card. 2. If a temporary ID card cannot be obtained in time: Cancel the test at the local vehicle management office at least one day in advance, so as not to waste the opportunity to take the Subject 3 test (there are a total of 5 test opportunities for Subject 3, with one free retake opportunity on-site for each test). Absence from the test will be treated as a failure, and the applicant must wait for 10 days before rescheduling.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.