···
Log in / Register

Where is the fuse box of Volkswagen Lavida located?

4 Answers
BraydenMarie
07/29/25 12:12am
Volkswagen Lavida's fuse box is located inside the instrument panel cover on the left side of the driver's seat and in the engine compartment, responsible for the normal operation of in-car electrical appliances and the safe functioning of external vehicle electrical components respectively. The automotive fuse box is a container for installing car fuses, which can be categorized into small, medium, and large fuse boxes based on the size of the installed fuses. The dimensions of the Volkswagen Lavida are 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm, featuring front-wheel drive. In terms of power, this model is equipped with two engines: a 1.5L naturally aspirated engine and a 1.4L turbocharged engine.
Was this review help?
19
5
Share
SanOscar
08/12/25 3:24am
The Volkswagen Lavida generally has two main locations for its fuse boxes. The one in the engine compartment is located near the battery, and you can see it by opening the black cover; the other is in the cabin, just below the left side of the steering wheel, where there's a storage compartment at knee level—pry it open to find it. Last time I helped my friend locate it, I noticed that many people easily overlook the one in the cabin, even though it's more convenient than the one in the engine compartment, especially when replacing fuses for headlights or the audio system. It's advisable to keep a few spare fuses (5A, 10A, 15A) in the car—when issues arise, you can fix them yourself in just three minutes, saving the hassle of calling a tow truck.
Was this review help?
9
3
Share
Expand All
AlejandroAnn
10/01/25 7:02am
I've dealt with the Lavida's fuse boxes quite a few times. There are mainly two locations - the engine compartment and the cabin. The one in the engine compartment is near the battery, with a plastic cover featuring a snap-fit design. The cabin-side fuse box is located at the lower left of the dashboard, usually covered by a small panel. I remember one winter when the wipers suddenly stopped working, and I fixed it by accessing the cabin fuse box. Always remember to turn off the vehicle power before checking fuses. Use specialized pliers to pull them out for inspection - if they're blackened, replace them with fuses of the same amperage. The in-cabin location is quite well-designed, allowing even taller individuals to operate it comfortably.
Was this review help?
10
0
Share
Expand All
LeAlexandra
11/15/25 2:02am
The Lavida's dual fuse box design is quite practical: the engine bay one near the battery facilitates inspection of high-current components, while the driver's knee-level compartment makes it easy to handle low-power devices like windows and radio. During my last road trip when the high beams suddenly went out, I found and replaced the corresponding fuse under the steering wheel. Opening the small cover reveals color-coded fuse blades, with different colors representing different amperage ratings. Regular checks for oxide buildup are recommended, with extra attention to moisture prevention during southern rainy seasons.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Which has priority, right turn or going straight?

Going straight has priority. According to Article 51 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, at intersections with designated lanes, vehicles must enter the appropriate lane based on their intended direction of travel. When making a right turn, if the vehicle ahead in the same lane is waiting for the traffic signal, the following vehicle must stop and wait in turn. Relevant information about traffic lights is as follows: Introduction: Traffic lights are signals that direct traffic flow, typically consisting of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Control methods: The most basic control method is fixed-time control at a single intersection. Line control and area control can also use fixed-time control methods, also known as static line control systems and static area control systems.
12
1
Share

Can motorcycles be driven on the road in Wuhan?

Motorcycles cannot be driven on the road in Wuhan. Here are the relevant details: Motorcycle ban policy: Wuhan has banned motorcycles since 2004. According to regulations, motorcycles are not allowed to operate in urban areas, but they can be driven freely in suburban areas. Motorcycles purchased in Wuhan cannot be licensed. However, motorcycles bought in suburban areas can be registered with suburban licenses. Driver's license required: Motorcycles are classified as motor vehicles in China, and a driver's license is required to operate them. The standard C-class car license is not applicable for motorcycles. Riding a motorcycle without a license is considered unlicensed driving. Currently, there are three main types of motorcycle licenses: Class F (for light motorcycles), Class E (for regular two-wheel motorcycles and light motorcycles), and Class D (for regular three-wheel motorcycles, regular two-wheel motorcycles, and light motorcycles).
18
5
Share

What are the requirements for opening a charging station?

Opening a charging station requires two basic conditions: a fixed parking space and a power supply. The following is an introduction to charging stations: Procedures for opening a charging station: First, submit a letter of intent to the local government's development and reform commission planning department and wait for approval. Then, apply for the geographical location from the Land and Resources Bureau, and simultaneously submit a feasibility report to the Urban Planning Bureau of the Construction Committee, also waiting for approval. Once these departments agree to the plan and provide approval, the next steps involve the Industrial and Commercial Bureau, Taxation Bureau, Quality Inspection Bureau, Environmental Protection Bureau, Fire Department, and, most crucially, the Power Bureau. Once all these approvals are obtained, after the construction of the electric vehicle charging station is completed, an acceptance application can be submitted to the power supply company. Upon passing the acceptance inspection, the power supply company will complete the installation of meters and power connection, after which the station can naturally begin operations. Functions of a charging station: The charging pile (socket) can achieve timed charging, electricity metering, and amount calculation, serving as a terminal for citizens to purchase electricity. At the same time, to improve the efficiency and practicality of public charging piles (sockets), functions such as multi-charging from a single pile (socket) and charging for electric bicycles will be gradually added in the future.
9
0
Share

What is Fatigue Driving Warning?

Fatigue driving warning is a driver fatigue monitoring and early warning product based on the physiological response characteristics of the driver. Below is a detailed introduction to the relevant content: Warning System: The commonly equipped fatigue monitoring system is called the "Fatigue Driving Warning System". It is based on the driver's physiological image response and consists of two main modules, the ECU and a camera. The system uses the driver's facial features, eye signals, head movements, etc., to infer the driver's fatigue state and provides alarm warnings and takes corresponding measures. It offers active and intelligent safety protection for drivers and passengers. Safety Warning System: Additionally, some fatigue monitoring systems are referred to as "Driver Safety Warning Systems". This system is activated when the vehicle enters environments that are prone to making the driver relaxed, such as straight and flat roads, or situations that may cause the driver to become distracted or doze off. It also activates when the vehicle speed exceeds 65 km/h. The Driver Safety Warning System consists of a camera, several sensors, and a control unit. The camera is installed between the windshield and the rearview mirror inside the car and continuously measures the distance between the car and the lane markings. It monitors the vehicle's driving route through signals from the digital camera and data from the steering wheel movements.
6
2
Share

What is the function of paddle shifters?

The function of paddle shifters is: without the need to step on the clutch pedal, the driver can complete gear shifting operations without taking their hands off the steering wheel. Their characteristics are: convenient operation, high efficiency, and improved driver control. Paddle shifters are located on the left and right sides of the steering wheel arc. The operating steps are: 1. Press the car's brake pedal all the way down; 2. Start the car and let it idle; 3. Move the automatic gear lever to D mode, S mode, or manual mode; 4. Lift with the index and middle fingers towards the driver to upshift, and press down with the thumb towards the steering wheel to downshift. The types of paddle shifters are divided into: 1. Fixed type: During steering, the steering wheel rotates while the paddle shifters remain stationary; 2. Follow-up type: During steering, the paddle shifters rotate simultaneously with the steering wheel as a whole.
2
3
Share

How to Lift the Wiper Blades on a BMW X1?

To lift the wiper blades on a BMW X1, follow these steps: 1. Press the start button to turn on the power; 2. Wait for about 5 seconds and press the start button again to turn off the power; 3. Push the wiper control lever all the way up and hold it for 3 seconds. The BMW X1 is a compact 5-door, 5-seat SUV with body dimensions of 4565mm in length, 1821mm in width, and 1620mm in height, with a wheelbase of 2780mm. It is equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 103 kW and a maximum torque of 220 Nm.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.