Where is the fuse box of the Ford Kuga located?

Can You Add Fuel First and Then Fuel Additive?

The correct sequence for adding fuel additive should be to add the fuel additive first, followed by refueling. This allows the fuel additive to mix thoroughly with the fuel under the impact of refueling, achieving the best performance. Below is relevant information about fuel additives: 1. The primary function of fuel additives is to clean carbon deposits, which has always been their main selling point, along with additional benefits such as maintaining the engine and fuel system. Certain specialized fuel additives can also improve the fuel's anti-knock properties (octane rating). 2. Fuel additives are mainly composed of more than ten ingredients, including nano-molecules, cleaning active factors, antioxidants, anti-corrosion agents, and demulsifiers. They are specifically designed to target harmful components in fuel such as sulfur, gum substances, and engine carbon deposits, thereby enhancing power, promoting combustion, providing anti-oxidation, anti-wear, cleaning, dispersing, demulsifying, anti-corrosion, and lubrication effects.

18

5

Share

Can the Cayenne use 95 octane gasoline?

The Cayenne can use 95 octane gasoline. Official data indicates that the Cayenne should use 95 octane or higher gasoline. 95 octane gasoline consists of 95% isooctane and 3% n-heptane. When the engine has a high compression ratio, high-octane gasoline should be used. If low-octane gasoline is used in a high-compression engine, it may cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving performance. The Porsche Cayenne is an SUV model with a length of 4846 mm, a width of 1939 mm, a height of 1705 mm, and a wheelbase of 2895 mm. The Porsche Cayenne is equipped with a 4.5-liter V8 32-valve all-aluminum naturally aspirated engine, delivering a maximum power output of 340 horsepower and a top speed of 266 km/h.

20

4

Share

Can the ETC still be used if it falls off?

ETC cannot be used if it falls off. To prevent the phenomenon of one ETC being used for multiple vehicles, there is a small button on the ETC installation surface. If this button pops out, the ETC will automatically become invalid. Even if it is reattached, it will not function properly. Solution for a fallen ETC: Go to the original issuing point or the provincial highway ETC service center to have it reinstalled and reactivated. ETC is the Electronic Toll Collection system, which is an automatic toll collection system for highways or bridges. It achieves the purpose of vehicles passing through highway or bridge toll stations without stopping to pay tolls by using dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, and then processing the transaction through computer networking technology with the bank for backend settlement.

12

4

Share

What procedures are required to change the color of a car?

The procedures required to change the color of a car include: color change application, vehicle model information, motor vehicle registration certificate, vehicle license, original and copy of the owner's ID card. Not all cars are allowed to change color, only domestic cars can, imported cars are prohibited from changing color. The paint color must not be the same as that of special vehicles, and the appearance must not be equipped with modified parts. It is important to go to a car beauty and maintenance enterprise that meets national qualifications for color change, only in this way can it pass the verification. Pay off the fines before changing the color of the vehicle. Because the registration procedure for changing the body color requires changing the original vehicle registration information and replacing the original vehicle license, it is equivalent to registering a new car again.

12

0

Share

What brand is the Murano transmission fluid?

Murano transmission fluid is of the NS-3 brand. Transmission fluid is an oil product that keeps the gear system clean, lubricates to extend the life of the transmission device, and provides effective lubrication even at low temperatures, reducing oil loss under harsh operating conditions. For the Nissan Murano, it is recommended to change the transmission fluid every 40,000 to 60,000 kilometers, with approximately 5 liters of fluid typically required for a replacement. Notes on checking and replacing Nissan Murano transmission fluid: 1. Regularly check whether the automatic transmission fluid level is normal. The method for checking automatic transmission fluid differs from engine oil; engine oil is checked in a cooled state, while transmission fluid needs to be preheated to about 50°C. Then, after shifting the gear lever through each position for 2 seconds and placing it in park, the normal fluid level on the dipstick should be between the maximum and minimum lines. If it is insufficient, add the same quality fluid promptly. 2. Generally, transmission fluid should be replaced every 80,000 kilometers or every 3 years. Additionally, due to differences in transmission types among various vehicle models, the amount of transmission fluid required varies. For specific maintenance intervals and quantities, refer to the 'self-service maintenance' function. 3. When replacing transmission fluid, it is essential to use the same type as the original vehicle. That is, manual transmission vehicles can only use manual transmission fluid (also called gear oil), while automatic transmission vehicles (including semi-automatic ones) must use automatic transmission fluid, ensuring the correct fluid specification is selected. 4. Different brands of automatic transmissions have different friction coefficients, so Automatic Transmission Fluid (ATF) varies and should not be mixed. Mixing ATF can damage the transmission's friction plates, leading to clutch or brake slippage, and in severe cases, can destroy the friction plates.

14

4

Share

What is the wheelbase of the BMW 3 Series?

BMW 3 Series wheelbase: 1. Standard wheelbase version: Wheelbase 2810mm, vehicle length 4610mm, which is the original BMW 3 Series, with the badge 3xxi. 2. Long wheelbase version: Wheelbase 2920mm, vehicle length 4720mm, this is a modified version of the original 3 Series with an increased wheelbase of 110mm and a corresponding increase in vehicle length by 110mm, with the badge 3xxLi. Introduction to wheelbase: 1. From a design perspective: Wheelbase is a very important parameter closely related to the performance of the car. The wheelbase determines the position of the car's center of gravity. Therefore, once the wheelbase is changed, the overall layout design must be redone. 2. From a practical use perspective: The length of the wheelbase directly affects the length of the car, which in turn affects the internal space of the vehicle.

4

1

Share

Where is the fuse box of the Ford Kuga located?

Can You Add Fuel First and Then Fuel Additive?

Can the Cayenne use 95 octane gasoline?

Can the ETC still be used if it falls off?

What procedures are required to change the color of a car?

What brand is the Murano transmission fluid?

What is the wheelbase of the BMW 3 Series?

How to Activate One-Touch Window Lift for Golf?

How to Remove a Car Spare Tire?

What is the method for adjusting direction when reversing into a parking space?

How often should car refrigerant be replenished?