···
Log in / Register

Where is the fuse box of Cadillac XT5 located?

4 Answers
VanHarper
07/29/25 10:44am
One fuse box of the Cadillac XT5 is located in front of the battery in the engine compartment, and another fuse box is near the driver's side door. The Cadillac XT5 is a luxury SUV from the Cadillac brand, with dimensions of 4812 mm in length, 1903 mm in width, and 1680 mm in height, and a wheelbase of 2857 mm. Below is an introduction to the Cadillac XT5: Powertrain: The Cadillac XT5 is equipped with a turbocharged engine, which delivers a maximum horsepower of 237 hp, a maximum torque of 350 Nm, and a maximum power output of 174 kW. Suspension: The front suspension of the Cadillac XT5 uses a MacPherson independent suspension, while the rear suspension employs a five-link independent suspension.
Was this review help?
2
3
Share
DelRyder
08/13/25 3:43pm
As a long-time Cadillac XT5 owner, I'm very familiar with the fuse box locations. There are two main sections: The main fuse box in the engine compartment is typically located near the lower right corner of the windshield or beside the battery after opening the hood - it's covered by a conspicuous black square lid. There's also a smaller fuse box near the driver's seat, just below the steering wheel on the left side; you can access it by gently prying open the plastic interior panel by the door. Last time when my fog lights malfunctioned, I found the blown fuse in the driver-side box and fixed it instantly by replacing it. I recommend keeping some spare fuses that match your manual's specifications. Always turn off the engine and remove the key before working for safety. Note that positions might vary slightly across different model years, so checking the owner's manual first is wise. Mastering these small DIY skills can save you both time and money on simple fixes.
Was this review help?
20
1
Share
Expand All
AutumnRose
10/07/25 6:46am
I've been using the Cadillac XT5 for quite a while, and the fuse box isn't hard to locate. The one in the engine bay is on the right side after opening the hood, near the battery, usually visible at a glance; the one on the driver's side is under the left footwell, and the interior panel pops right open. My car had a fuse issue once—the sound system suddenly stopped working—and I fixed it by replacing a fuse inside. A small pair of pliers or even your fingers will do the job, but don't forget to turn off the car first; safety comes first. The XT5's fuse boxes are well-marked and quite user-friendly; I recommend owners familiarize themselves with them to stay calm in emergencies. Check the manual for specifics, as layouts may vary between models. Once you get the hang of it, you'll save yourself a trip to the repair shop.
Was this review help?
1
5
Share
Expand All
VonConnor
11/20/25 8:09am
When driving the XT5, I always pay attention to the fuse boxes, which are located in two places. The main fuse box in the engine compartment is next to the battery, and you can quickly locate it by opening the cover; the secondary fuse box on the driver's side is behind the panel near your left foot, and it can be easily pried open. Once, when the windows stopped working, replacing the fuse there fixed the issue. Keep some spare fuses in the glove box for emergencies; the operation is simple, even beginners can try it. The manual is a key reference to ensure accurate location; remember the safety guidelines and avoid tampering while the engine is running.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

What Causes a Motorcycle Engine to Overheat and Emit White Smoke?

If white smoke is emitted from the motorcycle's exhaust pipe, it is usually due to the motorcycle being old or a lack of regular maintenance. The principle behind white smoke from the motorcycle exhaust pipe: If the cylinder or valve oil seal is damaged, causing engine oil to leak into the cylinder and burn, or if the oil pump is aged and supplies excessive oil to the cylinder for combustion, or if the spark plug ignition is abnormal leading to incomplete combustion of gasoline, or if the throttle valve screw of the oil pump is adjusted too loosely, or if the engine is frequently shut down before reaching the optimal operating temperature due to short-distance riding, incomplete combustion can produce waste particles that adhere to the engine oil, or burned engine oil may accumulate in the exhaust pipe. These issues significantly increase the likelihood of white smoke emission from the exhaust pipe. The best solution is to send the motorcycle for repair as soon as possible. Ways to prevent white smoke from the motorcycle exhaust pipe: To prevent white smoke from the motorcycle exhaust pipe, in addition to regularly checking the vehicle's condition, periodic maintenance and oil changes are also crucial. Pre-ride warm-up and adherence to proper riding techniques should not be overlooked either.
13
4
Share

Which region has the license plate with the prefix 'Hei L'?

The license plate with the prefix 'Hei L' belongs to the Songhua River region. Additional information about the Songhua River is as follows: 1. The Songhua River is a river in Northeast China and the largest tributary of the Heilongjiang River. 2. During the Northern and Southern Dynasties, it was called 'Nan Shui,' and during the Liao and Jin dynasties, it was referred to as 'Huntong Jiang,' a massive river flowing northeast into the Tartar Strait. 3. After the founding of the People's Republic of China, it was designated as a tributary of the Heilongjiang River. It is now the largest right-bank tributary of the Heilongjiang River. 4. In the Sui Dynasty, it was called 'Nan He,' in the Tang Dynasty 'Na Shui,' during the Liao and Jin dynasties 'Ya Zi He' and 'Huntong Jiang,' and in the Qing Dynasty 'Huntong Jiang' and 'Songhua Jiang.' The Songhua River flows through Jilin and Heilongjiang provinces; its basin covers an area of 557,200 square kilometers, spanning the four northeastern provinces of Heilongjiang, Jilin, Liaoning, and Inner Mongolia; its annual runoff is 76.2 billion cubic meters.
12
1
Share

Can Rear Air Conditioning Be Installed in a Car?

Rear air conditioning can be installed in a car. Here is an introduction to air conditioning-related content: 1. Operation: Pressing the AC button activates the cooling system of the air conditioning compressor. 2. Location: The car's AC button is located below the display screen. Below is extended information about air conditioning-related content: 1. Function: Adjusts and controls the temperature, humidity, air cleanliness, and airflow state inside the car cabin. 2. Components of the Car Air Conditioning Cooling System: Compressor, condenser, receiver-drier, expansion valve, evaporator, and blower.
13
2
Share

What does EBP mean in cars?

EBP in cars stands for Electrical-Park-Brake, which refers to the electronic parking brake system. Below is a detailed introduction to the electronic parking brake system: 1. The electronic parking brake system replaces traditional mechanical levers and tire cables, substituting the conventional handbrake lever with an electronic handbrake button. It is safer than traditional handbrake levers as the braking effect does not vary with the driver's force, transforming the traditional handbrake lever into an easily accessible button. 2. EBP is primarily used in tractors and trucks. The EBP intelligent energy-saving system is equivalent to a three-gear selector for the engine, allowing free selection based on different road conditions and load weights to keep the engine operating in the most fuel-efficient range, thereby achieving fuel-saving purposes.
1
2
Share

What does the exclamation mark in brackets on the car display mean?

A red exclamation mark (specifically in the form of an exclamation mark inside a circled bracket) indicates a warning for the braking system, mainly signaling either a braking system malfunction or low brake fluid level. Solution: Immediate inspection and repair of the braking system is required to avoid accidents. Apart from the red exclamation mark indicating a braking system fault, other exclamation marks on the car are yellow, representing general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four scenarios: General Fault: An exclamation mark inside a triangle indicates a general performance or component/function fault in the car. This could include parking sensor faults, fuel cutoff system intervention or malfunction, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a transmission fault or transmission lubricant level below the normal range. Transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark with a line under the bracket represents the tire pressure monitoring warning light. This light turns on when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a fault in the car's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem.
20
1
Share

Should headlights be alternated between high and low beam or just low beam when meeting another vehicle?

When meeting another vehicle, headlights should be switched to low beam. Car lights not only serve the purpose of illumination but also act as a communication tool between drivers. However, improper use of car lights can also cause disturbances. The correct way to use high and low beam headlights: High beams illuminate a higher area than low beams, allowing drivers to see further down the road. Therefore: 1. It is best to use low beams on well-lit roads or sections with good visibility; 2. If the road ahead is unlit and completely dark, use high beams; 3. When encountering another vehicle, always remember to switch to low beam. If the oncoming vehicle does not switch to low beam, slow down appropriately.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.