Where is the fuse box of Baojun 360 located?

1 Answers
DiHeidi
07/29/25 6:21pm
The fuse box of Baojun 360 is located on the lower side of the instrument panel, and it can be seen by pulling out the storage box. Fuse is its commonly used name, and its real name is circuit breaker. For easier understanding, it is generally referred to as a fuse. The function of the fuse is to protect the car's circuit when the circuit current is abnormal and exceeds its rated current, causing it to blow. Baojun 360 is a model under SAIC-GM-Wuling, with body dimensions of 4615mm in length, 1735mm in width, and 1660mm in height, and a wheelbase of 2750mm. In terms of appearance, Baojun 360 adopts a new design language, featuring a new hexagonal design for the front grille paired with eagle-eye headlights.
Was this review help?
9
0
Share
More Forum Discussions

What are BBA cars?

BBA refers to the three German luxury car brands: Mercedes-Benz, BMW, and Audi. The English name for Mercedes-Benz is Benz, BMW is BMW, and Audi is Audi. The first letters of these three car brands' English names combine to form BBA. Taking the 2021 Mercedes-Benz E-Class as an example, its body dimensions are: length 5078mm, width 1860mm, height 1484mm, with a wheelbase of 3079mm. The 2021 Mercedes-Benz E-Class features a multi-link independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 184PS, a maximum power of 135kW, and a maximum torque of 280Nm, paired with a 9-speed automatic transmission.
19
5
Share

Does a Dash Cam Require a Voltage Reducer Cable?

A dash cam generally does not require a separate voltage reducer cable, but if you are routing concealed wiring, then a voltage reducer cable is necessary. Functions of a dash cam voltage reducer cable: It facilitates power supply for the dash cam, ensuring its safe operation. The voltage reducer cable converts the vehicle's 12V electrical voltage to 5V2A, providing a suitable power supply for the dash cam, ensuring its safe operation, and making the wiring more concealed, thus enhancing the interior aesthetics. Points to note when using a dash cam voltage reducer cable: Connect the voltage reducer cable and route the concealed wiring along the A-pillar to the door seal, extending it near the fuse box. Open the fuse box, locate the ACC socket, connect the red wire of the voltage reducer cable to ACC, and ground the black wire by screwing it onto a screw in the fuse box.
16
0
Share

Why Do You Feel Drowsy on the Highway?

There are three main reasons for fatigue during highway driving: 1. Energy factors: Driving at high speeds requires greater concentration, leading to sustained neural impulses that consume large amounts of energy and oxygen in the brain. Additionally, maintaining driving postures, such as raised hands, pointed toes, and support from shoulders and waist, further increases energy consumption. Prolonged sitting also slows blood circulation, reducing the body's ability to supply energy and oxygen, which can cause drowsiness due to nutrient deprivation in the brain. 2. Oxygen factors: Drivers often keep windows closed on highways. The small, well-sealed space of a car can lead to decreased oxygen levels and increased carbon dioxide concentration. When CO₂ levels exceed 0.2% (normal: 0.04%), it can cause headaches, drowsiness, sluggishness, and difficulty concentrating. 3. Road conditions: Statistics show that drowsiness is far more likely on highways than on regular roads. The enclosed highway environment has fewer distractions, higher speeds, simpler operations, and monotonous visuals. Combined with louder tire and wind noise, the lack of prolonged brain stimulation creates a hypnotic effect on the body.
14
3
Share

Should the Water on the Car Be Completely Dry Before Waxing?

Waxing should be done after the water on the car is completely dry. New cars should not be waxed casually: Because the paint layer of a new car already has a protective wax, waxing too early will remove the original wax on the surface of the new car, causing unnecessary waste. Generally, there is no need to rush to wax a new car within five months of purchase. Master the frequency of waxing: Car waxing can generally last for 3-4 months, but it still depends on the usual parking location and weather conditions. For example, vehicles parked outdoors, exposed to wind and rain, should ideally be waxed every 2-3 months. Of course, this is not a strict rule. Generally, when the body of the car feels rough to the touch, it's time to wax again.
16
5
Share

What are the reasons for reduced braking power?

There are several reasons for reduced engine power in cars: Excessive carbon buildup on valves and intake pipes: Excessive carbon buildup on valves and intake pipes is a common cause of decreased car power. The solution is to have professional automotive technicians clean the carbon deposits and check if the spark plugs need replacement. Blockages or vapor lock in fuel lines: Inspect the fuel supply system for any blockages or vapor lock in the fuel lines, check if the fuel pump is functioning properly, verify if the carburetor float chamber fuel level meets specified requirements, examine if the air filter is clogged, and check if the exhaust system is obstructed. Improper tire pressure: Improper tire pressure, especially when underinflated with multiple passengers, can be particularly noticeable. Therefore, when inflating tires, ensure they are properly filled according to the tire pressure chart indicated on the vehicle body.
1
0
Share

What does the small wrench symbol mean on the old Volvo C30?

The small wrench symbol on the old Volvo C30 serves as a reminder for scheduled maintenance based on mileage. Below are specific introductions to dashboard functions: 1. Conventional Gauges: The car dashboard displays the operational status of various vehicle systems. Common indicators include fuel warning light, washer fluid light, electronic throttle light, front/rear fog light indicators, and warning lights. Different vehicles may have varying instrument configurations, but standard gauges typically include speedometer, tachometer, oil pressure gauge, coolant temperature gauge, fuel gauge, and charging indicator. 2. Indicator/Warning Lights: Automotive dashboards feature various indicator or warning lights such as coolant level warning, fuel level indicator, washer fluid level light, charging system light, high/low beam indicator, gear position light, ABS (Anti-lock Braking System) indicator, traction control light, and SRS (Supplemental Restraint System) airbag warning light.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.