···
Log in / Register

Where is the fuse box located in the Wuling Zhiguang?

4 Answers
StPenelope
07/29/25 2:55pm

The fuse box in the Wuling Zhiguang is located under the steering wheel. The fuse box is a container designed to hold automotive fuses. The Wuling Zhiguang is classified as a microvan. Taking the 2020 Wuling Zhiguang Utility model as an example, its body dimensions are: length 3797mm, width 1510mm, height 1820mm, with a wheelbase of 2500mm and a fuel tank capacity of 38 liters. The 2020 Wuling Zhiguang Utility model is equipped with a 1.2L naturally aspirated engine, delivering maximum horsepower of 76hp, maximum power of 56kW, and maximum torque of 108N·m. It features MacPherson strut independent suspension at the front and longitudinal leaf spring suspension at the rear.

Was this review help?
15
0
Share
AveryDella
08/13/25 7:28am

I've been driving a Wuling Zhiguang minivan for almost ten years, and I know there are typically two most common locations for the fuse box: one is under the dashboard on the driver's side, inside a small panel beneath the steering wheel—just flip it open to see all the fuses. The other is in the engine compartment, near the battery or the front firewall. Common issues like headlights not working or AC failure are often caused by blown fuses. When checking, always turn off the power and remove the key first, then gently pry open the panel with small pliers—don’t yank it to avoid breaking the plastic clips. If unsure, refer to the owner’s manual—the booklet that came with the new car has helpful diagrams and instructions. Remember to regularly inspect the fuses to prevent sudden breakdowns and ensure driving safety.

Was this review help?
20
2
Share
Expand All
Josiah
10/11/25 5:20am

I'm a hands-on car owner who's been tinkering with my Wuling Sunshine for years. Its fuse box is located right above the driver's footwell area, beneath the steering wheel. There's a hidden cover panel there—just press or gently pry it open to reveal all the fuses controlling things like headlights and audio system. There's also a secondary fuse box in the engine compartment handling high-power loads like the radiator fan. When issues arise (say, wipers stop working), always check the fuses first—replace any blown ones. Simple steps: turn off ignition, use proper lighting to identify positions, and never mix up fuse locations (they have different amp ratings). From experience, Wuling's design is quite logical—easily accessible though beginners might fumble around. Keep a flashlight handy for better visibility, or just visit a repair shop if unsure.

Was this review help?
1
4
Share
Expand All
PaulRose
11/24/25 6:26am

Hi, I think locating the fuse box of the Wuling Zhiguang is not difficult. It's mainly under the dashboard on the driver's side, next to the steering wheel. Just open a small cover to see the fuse layout. There's also one commonly found in the engine compartment, usually on the front left side. When checking, make sure the car is parked steadily and the power is turned off. If you're unsure about the location, refer to the owner's manual for clarification. It's convenient and quick, perfect for beginners to handle minor issues.

Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the range of the Passat hybrid without charging?

If the Passat hybrid is not charged, its range can reach 105 kilometers, and the range can be extended further after charging. Below are the specific details about the Passat hybrid: 1. Configuration: In terms of functional configuration, the Passat comes standard with automatic start-stop, keyless entry, keyless start, a PM2.5 filtration device, and an electric sunroof. Some higher-end models are equipped with automatically folding electric rearview mirrors when parked, and models above the Premium version also feature automatic tilt-down and anti-glare functions when reversing. Except for the entry-level model, which has manually adjustable seats, all other models come with electric seats, including front seat heating and a boss key function. 2. Powertrain: There are a total of three powertrain options. The 280 model is equipped with a 1.4T EA211 engine paired with a DQ200 seven-speed dry dual-clutch transmission. The 330 and 380 models feature high and low-power versions of the 2.0T third-generation EA888 engine, respectively, paired with a DQ381 seven-speed wet dual-clutch transmission.
7
2
Share

How to Adjust the Lights on Mercedes-Benz R320?

To adjust the lights on the Mercedes-Benz R320, simply turn the light knob located below the left side of the steering wheel. Below is some relevant information about the Mercedes-Benz R320: 1. Introduction: The Mercedes-Benz R320 is a luxury sports tourer under the Mercedes-Benz brand. It is equipped with the 4MATIC four-wheel-drive system and features rear axle air suspension, ensuring both driving performance and comfort. 2. Performance: The Mercedes-Benz R320 is powered by a 3.0T twin-turbocharged V6 engine, delivering a maximum power of 200 kW and a maximum torque of 400 Nm, with peak torque available between 1,300 and 4,500 rpm. Paired with a 7-speed automatic transmission, it achieves a 0-100 km/h acceleration time of 7.8 seconds. While the performance of this naturally aspirated engine appears impressive on paper, the actual driving experience may feel less dynamic due to the vehicle's hefty weight of 2,230 kg.
4
3
Share

What does the Panamera Sport Turismo mean?

The Panamera Sport Turismo model is a shooting brake. Here is more information about the Panamera Sport Turismo: 1. 2.9-liter twin-turbocharged V6 engine: The 2.9-liter twin-turbocharged engine produces 330 horsepower and a maximum torque of 450 Nm. This engine reaches its maximum power at 5400 to 6400 rpm and its maximum torque at 1340 to 4900 rpm. It features direct fuel injection and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed dual-clutch transmission. 2. 4.0-liter twin-turbocharged V8 engine: The 4.0-liter twin-turbocharged V8 engine delivers 460 horsepower and a maximum torque of 620 Nm. This engine achieves its maximum power at 6000 to 6500 rpm and its maximum torque at 1800 to 4500 rpm. It also features direct fuel injection and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed dual-clutch transmission.
20
5
Share

What is the Difference Between Thermal Imaging and Night Vision Devices?

The biggest difference between night vision devices and thermal imaging devices lies in their working principles. The differences between night vision devices and thermal imaging devices are as follows: 1. Imaging Effect: Ordinary night vision devices observe targets directly through the lens, so the field of view is circular, similar to what is seen through a telescope lens, and the image appears green. If the clarity is sufficient, it is possible to identify who the human target is and distinguish facial features. Infrared night vision thermal imaging devices display the image on an internal LCD screen rather than directly observing the target, so the field of view is square. The imaging of infrared night vision thermal imaging devices depends on temperature distribution—higher temperatures appear brighter, while lower temperatures appear darker. Their primary use is to detect targets and identify their categories, such as whether the target is a human, animal, etc. 2. Influence of Light: Second-generation+ night vision devices are significantly affected by environmental conditions due to their imaging principles, especially light. When light dims, the observation distance shortens. In complete darkness, an auxiliary infrared light source is required, but the maximum range of such sources is generally only about 100 meters. They are also sensitive to strong light, even though many traditional night vision devices have strong light protection. However, significant changes in environmental brightness can greatly affect observation. Infrared thermal imaging night vision devices are not affected by light. Whether it is day, night, rain, snow, or fog, the target object can be observed clearly. For this reason, top-tier automotive night vision systems, such as those used by Mercedes-Benz and BMW, employ infrared thermal imaging devices.
13
5
Share

What Causes Abnormal Noise and Failure to Start When Igniting?

Here are the specific reasons for abnormal noise and difficulty starting when igniting a car: 1. Starting system: Insufficient battery power, resulting in the starter motor not generating enough speed and torque to start the engine. 2. Fuel supply system: The main reasons related to the fuel supply system include poor atomization or clogging of the fuel injector, blockage in the car's fuel line, malfunction of the high-pressure fuel pump or fuel pump, and clogged fuel filter. When the fuel atomization in the engine cylinder is poor, or the fuel line and its components are blocked, it will affect the normal starting of the engine. 3. Intake system: The main reasons related to the intake system include a clogged air filter and throttle malfunction. When the engine's air intake is obstructed, the engine will experience difficulties starting.
2
1
Share

What is the Chinese name for the Kia Telluride?

The Kia Telluride does not have a Chinese name. Here are the specific details about the Kia Telluride: 1. Interior: The interior of the new car maintains a luxurious and spacious style, with extensive use of genuine leather wrapping, soft-touch materials, and real wood trim, ensuring a high level of luxury. The center console features a floating design with a 10.25-inch touchscreen that supports Apple CarPlay and Android smartphone connectivity. It also includes six USB charging ports, wireless charging technology, and a 10-speaker Harman Kardon premium audio system. 2. Powertrain: The new car is equipped with a 3.8L V6 engine, delivering a maximum power of 295 horsepower and a peak torque of 354 Nm. It is paired with an 8-speed automatic transmission and offers an optional four-wheel-drive system.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.