Where is the fuse box located in the Wuling Hongguang S?

1 Answers
AliyahMarie
07/30/25 3:30am
The Wuling Hongguang S has two fuse boxes - one in the engine compartment and another in the cabin. The cabin fuse box is located near the clutch pedal, which can be accessed by removing the interior panel above the clutch pedal. A car fuse box is a container that houses automotive fuses, which can be categorized by size into small, medium, and large automotive fuse boxes. The Wuling Hongguang S is a crossover vehicle independently developed by SAIC-GM-Wuling based on the Wuling Hongguang model, positioned between commercial vehicles and passenger cars. Its body dimensions measure 4400mm in length, 1680mm in width, and 1770mm in height.
Was this review help?
8
3
Share
More Forum Discussions

How to Maintain an Automatic Transmission?

Automatic transmission maintenance methods are: 1. Follow the manufacturer's requirements for regular inspections and timely replacement of specified transmission fluid; 2. Only about 30% of the total fluid volume can be drained through the drain bolt, and transmission cleaners should not be used; 3. For a complete transmission fluid change, use a transmission cleaner in conjunction with a transmission fluid exchange machine. An automatic transmission is a gear-shifting device that automatically changes gears based on vehicle speed and engine RPM, as opposed to a manual transmission. Types of automatic transmissions include: MT automatic transmission, AMT automatic transmission, AT automatic transmission, CVT automatic transmission, and DSG automatic transmission.
15
2
Share

What are the causes of abnormal noise in the transmission?

Introduction to the causes of transmission noise: 1. Wear and damage of bearings. When bearings wear out, their clearance increases and their fitting accuracy decreases; when bearings are damaged, abnormal noise will occur due to their inability to operate normally, and may even cause damage to the transmission components, leading to further faults. 2. Abnormal gear meshing clearance. This can be caused by wear of transmission components or the use of parts with low precision during replacement, resulting in excessive clearance; or by overly tight gear clearance during assembly. 3. Metal peeling on gear tooth surfaces, broken gear teeth, or misalignment during assembly. 4. Insufficient lubricant leading to poor lubrication. The corresponding lubricant should be replaced. 5. Water ingress into the transmission. If not repaired in time, it may cause noise problems over time.
11
0
Share

What are the differences between the 2019 Passat and the 2020 Passat?

The differences between the 2019 Passat and the 2020 Passat lie in the fuel tank capacity: the 2019 Passat has a fuel tank capacity of 66 liters, while the 2020 Passat has a fuel tank capacity of 68.5 liters. Both the 2019 Passat and the 2020 Passat are mid-sized 4-door 5-seater sedans, with body dimensions of length 4933mm, width 1836mm, height 1469mm, and a wheelbase of 2871mm. Both models are equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
3
2
Share

How Many Days in Advance Can You Renew Your Driver's License?

You can renew your driver's license up to 90 days before its expiration date. The renewal process must be completed at the local vehicle management office. Required documents for renewal include your ID card, driver's license, medical examination certificate, and photos. The vehicle management office is primarily responsible for handling vehicle registration, modification, transfer, mortgage, and deregistration, as well as driver's license applications, replacements, renewals, verifications, and other related services for vehicles and drivers. According to the regulations on the application and use of motor vehicle driver's licenses, drivers must apply for a renewal at the vehicle management office where the license was issued or another office within 90 days before the expiration of their current driver's license.
8
2
Share

What is the correct sequence for parking and turning off an automatic transmission vehicle?

Automatic transmission vehicle parking and shutdown sequence: 1. Depress the brake pedal to ensure the vehicle is completely stopped, then shift into N (Neutral) gear; 2. Engage the parking brake; 3. Shift into P (Park) gear and release the brake pedal; 4. Turn off all unnecessary electrical devices in the vehicle; 5. Verify the gear is in P position, all non-essential electrical devices are turned off, and the steering wheel is straightened; 6. Rotate the key counterclockwise to the end position, or press the engine start/stop button once to switch the ignition to OFF position. Important note: The parking brake must be engaged before shifting into P gear. This practice allows the parking brake to handle the parking load, thereby reducing stress on the transmission system.
13
3
Share

What Causes Fluctuating Car Coolant Temperature?

The reasons for fluctuating car coolant temperature are: 1. Scale buildup on the contact surface between the coolant temperature sensor and the coolant; 2. Aging of the thermistor; 3. Malfunctioning voltage regulator; 4. Short circuit in the temperature gauge heating coil; 5. Needle rubbing against the gauge face. Causes of high coolant temperature include: 1. Poor engine cooling; 2. Prolonged use without cleaning internal and external radiator deposits, affecting coolant circulation and heat dissipation; 3. Damaged fan or other cooling components. Consequences of high temperature are: 1. Accelerated engine wear and reduced oil lubrication effectiveness; 2. Potential radiator rupture due to excessive heat; 3. Increased engine block temperature that may cause cylinder head/block deformation or damage with prolonged exposure.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.