Where is the fuse box located in the Volvo XC90?

1 Answers
MacDamian
07/24/25 7:35am
The fuse box is located in two places: one is behind the front glove box, and the other is in the right rear luggage compartment. Here are the specific details about the Volvo XC90: 1. Exterior: The exterior design of the Volvo XC90 draws inspiration from Scandinavian aesthetic design language. The short and compact front suspension, the upright and three-dimensional radiator grille, and the VOLVO emblem embedded in the center complement the striking 'Thor's Hammer' LED headlights on both sides. 2. Powertrain: The entire lineup is equipped with a hybrid system. The B5 and B6 models feature a new-generation 2.0T turbocharged engine, incorporating a 48V mild hybrid system, paired with an 8-speed automatic transmission. The B5 model delivers a maximum power of 250 horsepower and a peak torque of 350 Nm, with a combined fuel consumption as low as 7.7 liters/100 km, achieving a harmonious balance between high performance and low consumption.
Was this review help?
12
2
Share
More Forum Discussions

Does Subject 1 Include True or False Questions?

Subject 1 of the driver's license examination includes true or false questions. The specific question types are divided into single-choice questions and true or false questions, with a total of 100 questions. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," each question is worth 1 point, totaling 100 points. If you answer 11 questions incorrectly during the exam, the system will automatically submit the test and end the examination. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. The exam content includes the theoretical basis of driving, road safety laws and regulations, local regulations, and other related knowledge. The exam is conducted on a computer, with a time limit of 45 minutes. Subject 1 test content: regulations on driver's licenses and motor vehicle management; road traffic conditions and regulations; road traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: During the exam, students should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue up to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Upon entering, verify your identity at the assigned seat and begin the exam. Ensure the camera is aligned with you and adhere to exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue up to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can schedule Subject 1. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail the retake, the exam will be terminated, and you must reschedule. In contrast, Subject 2 and Subject 3 allow only five attempts each. Subject 2 and Subject 3 exams must be scheduled at least ten days apart. If you fail the Subject 3 safe driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driver's license examination: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include Subject 4.
17
2
Share

Should the Roewe RX5 use 92 or 95 octane gasoline?

According to the official vehicle manual recommendation, the Roewe RX5 should use 92 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it on the fuel tank cap, which will be clearly marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade. A high compression ratio can still be tuned to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Roewe RX5 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane value is too low, the lowered ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
12
5
Share

What Causes the One-Button Start Key Light to Flash?

The reasons for the one-button start key light flashing: 1. Incorrect wiring due to the installation of a dashcam or other electrical devices, which requires rewiring; 2. A weak battery that needs replacement; 3. Issues with key detection, where strong nearby magnetic fields may cause interference and prevent the key from being detected—align the key with the one-button start; 4. The steering wheel is locked, which is a normal anti-theft feature. This occurs when the steering wheel is turned after the vehicle is turned off, causing the car's computer to assume a theft attempt and automatically activate the anti-theft function.
16
5
Share

Are Electric Vehicles Good at Wading Through Water?

Electric vehicles have relatively strong wading capabilities. Here are the detailed points regarding their water-fording abilities: 1. Reasons: The motors of electric vehicles operate in a sealed environment, eliminating concerns about water ingress. Although most EV battery packs are designed to be mounted on the chassis, mainstream first-tier EV models feature battery housings with IP67 waterproof ratings. 2. Precautions: Before wading, EV owners should understand their vehicle's wading rating to assess the permissible water depth. During wading, maintain a steady speed and pass through flooded sections as quickly as possible. If water depth exceeds the rated level, seek an alternative route.
12
2
Share

Is an ignition advance angle of -10 normal?

An ignition advance angle of -10 is not normal. Here are the details about negative ignition advance angle: 1. Cause: The engine's ignition advance angle is negative because the knock sensor is faulty. If the ignition advance angle consistently shows a negative value, it indicates that the engine ignition is in a delayed state, possibly due to poor anti-knock performance of the car or other abnormal engine issues. 2. Function: An appropriate ignition advance angle allows the engine to perform the most mechanical work per cycle. If the ignition advance angle is too large, it can easily cause detonation. If the ignition advance angle is too small, the exhaust temperature rises, and power decreases.
8
4
Share

Will a Car Generator Get Damaged if It Gets Wet?

Car generators won't fail immediately if they get wet, but water exposure can affect the engine's lifespan. It is recommended that car owners take protective measures. Here is some relevant information about generators: 1. Function: The car generator serves as the main power source of the vehicle. Its role is to supply power to all electrical devices (except the starter) while the engine is running normally and simultaneously charge the battery. 2. Components: Due to the many advantages of alternators over DC generators, DC generators have been phased out. Alternators generally consist of four parts: the rotor, stator, rectifier, and end cover.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.