···
Log in / Register

Where is the fuse box located in the Roewe RX3?

1 Answers
LeAndres
07/29/25 1:32am

The Roewe RX3 is equipped with two fuse boxes: the front passenger side fuse box (located behind the glove box on the front passenger side) and the engine compartment fuse box (located on the left front side of the engine compartment). Generally, the back of the fuse box is printed with the function and specifications of each fuse. Owners only need to refer to the corresponding fuse specifications or consult the user manual to check the fuses. Below are the steps to replace a fuse: 1. Turn off the ignition switch and all electrical devices, and disconnect the negative battery cable. 2. Remove the sealing panel under the glove box to access the front passenger side fuse box; for the engine compartment fuse box, simply press the latch to open the fuse box cover. 3. Use a fuse puller to grip the head of the fuse, pull and remove the fuse, and check if the fuse is blown. 4. If the fuse is blown, replace it with another fuse of the same ampere rating.

Was this review help?
17
1
Share
More Forum Discussions

What to Do If the Cigarette Lighter Doesn't Pop Back?

Solutions for a cigarette lighter that doesn't pop back: The lighter socket may be damaged. Inside the socket, there are contact points. If these points become deformed, it can lead to poor contact of the cigarette lighter. Simply replacing the cigarette lighter socket can solve the issue. Prolonged use may cause oxidation of the lighter's electrodes, which can also result in poor contact. When using the cigarette lighter socket, it's important to note: If the car is not driven for an extended period, it's best to disconnect the power supply of the dash cam. Some car models have cigarette lighter sockets that remain powered even when the key is not inserted. Some vehicles are equipped with both a cigarette lighter socket and a 12V power outlet. These two interfaces are different; the 12V power outlet cannot be used to heat a cigarette lighter.
15
2
Share

How long does it take to get a 50-choose-1 license plate?

50-choose-1 license plates can sometimes be obtained immediately, but there are also special cases where it may take one to two weeks to get the plate. After purchasing a car, you need to use a temporary license plate for a period of time. Temporary license plates have usage time limits, with a validity period of 15 days. If you continue to drive on the road after the temporary license plate has expired, it is equivalent to driving without a license, and you will be penalized if caught by traffic police. Many car owners mistakenly believe that driving with a temporary license plate means traffic cameras won't record violations, so they speed, cross solid lines, or run red lights on the road, which are very dangerous driving behaviors.
3
3
Share

What are the consequences of not purchasing vehicle damage insurance?

Vehicle damage insurance is not bought the consequences are: when the vehicle is scratched elsewhere, the owner needs to bear all the vehicle repair costs. In the event of a traffic accident, unless the other party is fully responsible, otherwise, when there is responsibility, they also need to bear part of the cost. Vehicle damage insurance in auto insurance belongs to commercial insurance and is voluntarily purchased. Vehicle damage insurance refers to a type of commercial auto insurance where the insurance company compensates within a reasonable range when the insured or their permitted driver causes damage to the insured vehicle during use due to an insurance accident. Vehicle damage insurance and third-party liability insurance are the basic insurances for vehicles, mainly compensating for the loss of the insured vehicle and the loss caused to third parties by the insured vehicle during use.
16
3
Share

What Causes the Engine Warning Light to Illuminate in an Automatic Transmission Vehicle?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor combustion of air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate. Causes include spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage. Turbocharger issues: Problems with the intake boost piping or turbocharger can trigger the warning light. The most common issue is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake system problems: Air intake issues may cause engine pipe blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can lead to intake problems. Exhaust system issues: Exhaust faults can also activate the warning light. Common causes include rear oxygen sensor failure, catalytic converter problems, or exhaust camshaft and bearing failures. The catalytic converter is particularly vulnerable to damage from leaded gasoline, certain lubricant additives, physical impacts, or fuel system issues. Anti-theft system malfunction: If the electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, it may prevent normal engine operation and trigger the warning light. When the engine warning light illuminates, follow these steps: First, check if the engine is running normally. If there's noticeable shaking, black smoke, etc., avoid restarting the engine. Note: Never restart if the light is red. If the engine can start, turn it off for 5-10 minutes. Then, without pressing the brake, press the start button once or turn the key halfway to the ON position (without depressing the clutch). The vehicle will perform a self-check; observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center promptly. Technicians can use diagnostic tools to read fault codes and perform targeted repairs.
13
2
Share

How long is it recommended to drive after a car battery is depleted?

After the car battery is depleted, it is recommended to drive for one to two hours to restore its original performance. If the car battery is severely depleted and the engine cannot be started, a jump-start procedure is required, followed by normal driving for a certain distance to recover. Steps for jump-starting the generator: 1. First, ensure that the auxiliary battery is 12V and the negative terminal is grounded. 2. Connect the jumper cables, making sure not to reverse the positive and negative terminals, as this may cause sparks when connected. Also, ensure the cables are tightly connected to the battery terminals (full contact) to avoid sparking during the process. 3. Start the engine of the vehicle with the auxiliary battery and run it at medium speed, then start the engine of the vehicle with the depleted battery. 4. Finally, disconnect the cables in the exact opposite order.
16
3
Share

What are the usual hours for drunk driving checks?

Drunk driving checks are typically conducted from 9 PM to 2 AM. Drunk driving refers to operating a vehicle within 8 hours after alcohol consumption or within 24 hours after being intoxicated. The basic procedures for traffic police conducting drunk driving checks are: 1. Setting up checkpoints and roadblocks; 2. Stopping passing vehicles and requiring breath tests; 3. Allowing vehicles with test results below 20mg per 100ml to proceed; 4. Arranging blood alcohol tests for vehicles exceeding 20mg per 100ml. For drunk driving of motor vehicles, the traffic management department of the public security authority will detain the driver until sober, revoke the motor vehicle driving license, and pursue criminal liability according to law. The driver cannot re-obtain a motor vehicle driving license within five years. For drunk driving of commercial motor vehicles, the traffic management department of the public security authority will detain the driver until sober, revoke the motor vehicle driving license, and pursue criminal liability according to law. The driver cannot re-obtain a motor vehicle driving license within ten years and is prohibited from driving commercial motor vehicles even after re-obtaining the license. If a major traffic accident occurs due to drunk driving or driving while intoxicated, constituting a crime, criminal liability will be pursued according to law, and the traffic management department of the public security authority will revoke the motor vehicle driving license, with a lifetime ban on re-obtaining it.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.