Where is the fuse box located in the Chery Flagcloud 3?

1 Answers
VonQuinn
07/29/25 7:30pm
The fuse box of the Chery Flagcloud 3 is located next to the battery in the engine compartment. Introduction to automotive fuse boxes: An automotive fuse box is a container used to install car fuses. Based on the size of the installed fuses, it can be categorized into small-size automotive fuse boxes, medium-size automotive fuse boxes, and large-size automotive fuse boxes. Common injection molding materials include PBT engineering plastics, with each material having different high-temperature resistance levels. Function of automotive fuse boxes: The function of an automotive fuse box is to act as a protective barrier for circuits by melting and cutting off the current when abnormal circuit current exceeds its rated value. When a circuit malfunctions or behaves abnormally, the current may continuously rise, potentially damaging important or expensive components in the circuit, or even burning out the circuit and causing a fire. If an automotive fuse is correctly installed in the circuit, it will melt and cut off the current when the current abnormally rises to a certain level and duration, thereby protecting the safe operation of the circuit.
Was this review help?
16
2
Share
More Forum Discussions

What to do if points are deducted from a Class A driver's license?

Handling methods for points deduction on a Class A driver's license: If the deducted points are less than 12, paying the fine will clear the points; if 12 points are accumulated in the current scoring cycle, the driver must attend a 7-day training at the vehicle management office within 15 days, take a test within 15 days, and if passed, the points will be cleared. Then, within 30 days, the driver must go to the vehicle management office to complete the downgrade and license replacement procedures. Points that do not reach 12 but have unpaid fines will be carried over to the next scoring cycle. A driver's license that accumulates 12 points and refuses to attend training or take the test will be revoked by the traffic police department. For drivers who accumulate 12 points or more twice in one scoring cycle, they must pass the relevant education and test before the points can be cleared according to regulations.
8
3
Share

What is the working principle of an ignition coil?

Here is a brief introduction about automotive ignition coils: 1. The automotive ignition coil essentially applies the principle of an electromagnetic induction transformer. The only difference between an ignition coil and a transformer is that a transformer operates continuously, whereas an ignition coil works intermittently. The ignition coil repeatedly stores and releases energy at a certain frequency, depending on the engine's operating speed. 2. When the ignition system's switching device connects the primary coil (low voltage), the current flowing through the low-voltage coil magnetizes the iron core, creating a strong magnetic field around it, and the iron core stores this magnetic energy. Then, when the switching device disconnects the primary coil circuit, the magnetic field of the primary coil disappears instantly, the iron core demagnetizes, and the magnetic lines of force rapidly contract, cutting through the secondary coil (high voltage). This induces a very high voltage in the secondary coil.
16
3
Share

What is the oil specification for Geely Emgrand?

Geely Emgrand uses 5W40 engine oil, which serves to lubricate and reduce friction, aid in cooling, seal against leaks, prevent rust and corrosion, and provide cushioning for the engine. Taking the 2020 Geely Emgrand GL as an example, it is a compact car with body dimensions of 4725mm in length, 1802mm in width, and 1478mm in height, a wheelbase of 2700mm, a fuel tank capacity of 55 liters, and a curb weight of 1335kg. The 2020 Geely Emgrand GL features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L turbocharged engine producing a maximum horsepower of 141PS, a maximum power of 104kW, and a maximum torque of 235Nm, paired with a 6-speed manual transmission.
7
1
Share

How to Adjust the Dashboard Time on a Land Rover Discovery 4?

Method to adjust the dashboard time on a Land Rover Discovery 4: 1. Start the vehicle, then press the SET button on the left side of the steering wheel to enter the time setting; 2. After entering the time setting, use the plus or minus buttons on the left side of the steering wheel to adjust the time; 3. Once adjusted, press the OK button to confirm, completing the entire time adjustment process. The Land Rover Discovery 4 is a model developed by Land Rover, with its body-on-frame construction indicating its true ORV (Off-Road Vehicle) rugged off-roader status. Its front grille features a hollowed-out design, making it more stylish, with smoother corners compared to the Discovery 3, eliminating the previous harshness. The headlight assembly also incorporates the currently popular LED design. The main change on the side of the Land Rover Discovery 4 is the air intake above the front wheel arches, with silver trim adding more texture. The rear design remains largely unchanged, but the taillight assembly now includes LED elements.
14
2
Share

Is the Engine of the Lynk & Co 03 from Volvo?

The engine of the Lynk & Co 03 is from Volvo. The Lynk & Co 03 is built on the CMA architecture jointly developed by Volvo and Geely. It is equipped with three types of engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. The low-power version 1.5-liter turbocharged engine has a maximum power of 115 kW and a maximum torque of 245 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. The high-power version 1.5-liter turbocharged engine has a maximum power of 132 kW and a maximum torque of 265 Nm, also featuring direct fuel injection technology and an aluminum alloy cylinder head and block. The 2.0-liter turbocharged engine has a maximum power of 140 kW and a maximum torque of 300 Nm, equipped with direct fuel injection technology and using an aluminum alloy cylinder head and block.
11
1
Share

What is the battery model for the Mazda CX-4 key?

Mazda CX-4 key uses a CR2025 battery. Depending on the car model, the battery type for the car key may vary. Generally, there are several battery models, including CR2302, CR2450, CR1616, CR2025, and CR1620, among others. The battery model can be seen on the back of the battery. To replace the battery, first open the key using a flat-head screwdriver by prying along the edges of the key. Once opened, you can see the internal circuit board and the battery inside. The Mazda CX-4 is a production model derived from the 'KOERU' concept car, positioned as a compact coupe SUV. Its KODO design language delivers a highly dynamic visual effect. The SKYACTIV-G engine is a new-generation high-efficiency direct-injection all-aluminum engine, continuing Mazda's outstanding Miller-cycle high-efficiency engine technology. It ensures low fuel consumption while maintaining excellent fuel efficiency, achieving a perfect balance between exhilarating driving pleasure and environmental friendliness at a higher level.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.