Where is the fuse box located in the Bora?

3 Answers
McStephanie
07/23/25 4:24pm
The fuse box in the Bora is located inside the instrument panel and the cockpit of the vehicle. If any electrical equipment stops working during the use of the car, it may be due to a blown fuse. The fuse box is responsible for transmitting driving information to various parts of the vehicle and is a key component in the car's electronic control system. The Bora is a compact sedan under the Volkswagen brand, powered by the EA111 series 1.4TSI turbocharged engine. In terms of body dimensions, the Bora measures 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. It is a four-door, five-seater sedan.
Was this review help?
10
0
Share
MacQuinn
08/10/25 12:09pm
I just bought a Bora not long ago and was also researching where the fuse box is. Directly telling you, on the driver's seat left side, near the steering wheel, there's a small panel right above the footwell. You can see it by squatting or bending down, and lifting the cover reveals the fuse collection. If you can't find it, it might be too dark inside the car; checking after parking and turning off the engine is safer. Remembering the location is important. Like me, sometimes the headlights don’t work because a fuse is blown, and replacing it fixes the issue. Some newer Bora models also have a second fuse box in the engine compartment, but the one inside the car is used more frequently in daily life. Regularly checking the fuses to ensure they're intact can prevent breakdowns on the road, and keeping a few spare fuses handy is also quite practical.
Was this review help?
7
5
Share
Expand All
SebastianRose
09/22/25 6:17am
As an experienced car enthusiast, I often help others diagnose vehicle issues. The main fuse box of the Bora is located above the foot pedal under the steering wheel on the driver's side, covered by a plastic panel that can be snapped open to reveal a row of fuses. Some models, particularly those before 2015, might have an additional fuse box in the left corner of the engine compartment, but the main one is always in this location. The design prioritizes quick repairs—for instance, if a blown fuse causes a problem, it's just a matter of checking and replacing it. Remember to turn off the engine before inspection to avoid accidents. The accessible location is key, and many car owners rely on this to handle minor issues, saving the hassle of a repair shop visit.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What to Do When the Haval H6 Battery Dies and the Car Won't Start?

Haval H6 without power can be started using the following three methods: Push Start: Push starting is the most familiar and effective emergency starting method, but it is a last resort and should not be used frequently, as it can cause some damage to the engine and clutch. This method should especially be avoided for automatic transmission vehicles. Tow Start: The method and principle of tow starting are similar to push starting, but towing is often more effortless and convenient. When implementing this method, use a tow rope of appropriate length and secure both ends firmly. Before towing, the drivers of both vehicles should agree on communication signals, such as using horns or hand gestures to indicate starting and stopping, to ensure coordinated action. Jump Start: If the battery is dead and there is another vehicle with jumper cables available, the jump-start method can be used to start the car. During the operation, bring the two vehicles close enough so that the jumper cables can connect the positive and negative terminals of both batteries. Ensure that the two vehicles do not touch each other, and only use cables with sufficient capacity and insulated sheathing.
7
3
Share

What is the emission standard of the Honda CR-V?

The Dongfeng Honda CR-V manufactured in October 2013 meets the China IV emission standard, while those produced after 2015 generally comply with the China V standard. Below are the detailed specifications of the Honda CR-V: Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, the VTEC engine differs in the number and control method of camshafts and rocker arms. It has two distinct sets of valve drive cams for low-to-medium speeds and high speeds, which can be automatically switched via electronic control system adjustments. The VTEC system allows the engine to automatically adjust the valve opening timing and lift according to driving conditions, thereby altering the intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
15
0
Share

Why does the keyless entry of Sagitar fail but can be unlocked with buttons?

The reasons why the keyless entry of Sagitar fails but can be unlocked with buttons are as follows: Poor soldering in the power distribution box: Poor contact caused by poor soldering can also lead to the failure of the sensor's operation. The most "down-to-earth" method is to gently tap the power distribution box with your hand, which might reconnect the poorly soldered points. However, this is not a long-term solution, and it is still necessary to go to a professional repair shop for repair. Signal being blocked: There is a signal blocker (such as a transformer) in the location where the owner and the vehicle are located, interfering with the signal between the key and the central control unit. Fault in the central locking system: It may be that the circuit fuse of the door lock is burned out, causing an open circuit.
4
5
Share

What is the Dago car?

Dago is a compact SUV under the Haval brand, with dimensions of 4620mm in length, 1890mm in width, 1780mm in height, and a wheelbase of 2738mm. Advantages of the Dago: Its retro exterior design aligns with current trends, and its rugged style appeals to young consumers. Built on the new Lemon platform, it offers gasoline, plug-in hybrid, and pure electric variants. The NVH engineering is excellent, and the chassis tuning shows significant improvement over previous models. Disadvantages of the Dago: The 1.5T small-displacement engine still struggles at medium to high speeds. The transmission prioritizes smoothness over shift speed. It has noticeable tire noise, high fuel consumption, and lacks lumbar support.
10
2
Share

What Causes Slow Tire Leaks in Cars?

Here are the specific reasons for slow tire leaks in cars: Foreign objects puncturing the tire: Common objects that can puncture tires include nails, screws, and sharp stones. Nails and screws can easily penetrate the tire, causing slow leaks, and may remain embedded in the puncture site. If not removed promptly, they can worsen the damage to the tire. Damage to the tire sidewall or inner edge: The sidewall and inner edge of a tire are vulnerable areas. Damage to the inner edge often occurs during improper installation or removal of the tire from the wheel rim, typically during tire replacement or after a repair. Damage to the sidewall or inner edge can lead to slow leaks and significantly increase the risk of a blowout. Faulty tire valve stem: Most passenger cars are equipped with tubeless tires, where the valve stem is mounted on the wheel rim and is usually made of rubber. Over time, rubber valve stems can harden and become brittle, eventually cracking and causing air leaks. Deformed wheel rim flange: When a car tire is fully inflated, the outer edge of the tire seals tightly against the wheel rim flange to prevent air leakage. If the wheel rim flange is deformed due to impact, it can compromise the seal with the tire's outer edge, resulting in a slow leak.
1
3
Share

How many kilowatt-hours does it take to fully charge the Leapmotor T03?

It uses CATL's NCM811 battery cells with a capacity of 36.5 kWh and an energy density of 171 Wh/kg. Actual charging time: The actual charging time when using a new energy electric vehicle mainly depends on the capacity of the lithium battery configured in the electric vehicle and the capacity of the charging station. Under normal circumstances: It is best to charge an electric vehicle when the remaining battery power is between 30% and 50%, which can avoid early battery capacity loss and over-discharge; if you frequently carry passengers or climb slopes, it is recommended to charge when the remaining power is at 50%.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.