Where is the fuse box located in the 2020 Audi A6L?

2 Answers
VonDaniella
07/29/25 3:05am
The fuse box of the 2020 Audi A6L is located on the side when the driver's door is opened. Below is a detailed introduction about the Audi A6L: 1. Overview: The Audi A6L is the first Audi model introduced into the Chinese market, with its predecessor being the third-generation Audi 100 (code C3) introduced in 1988. The Audi A6L is a series developed by FAW-Volkswagen Audi based on the German new A6, serving as the successor to the A6. 2. Other Details: The trunk volume is 430 liters. The fuel consumption ranges from 6.8 to 8.0L/100km. The fuel tank capacity is 73L. The engine types include 2.0T high/low power and 3.0T engines. The standard seating capacity is 5. The top speed is 250km/h. The seat material is genuine leather. The acceleration time ranges from 6.6 to 8.3 seconds. The drive types are front-wheel drive or front-four-wheel drive.
Was this review help?
15
0
Share
LePenelope
08/12/25 6:58am
I've driven many cars before and am quite familiar with Audi. The fuse boxes of the 2020 Audi A6L are mainly located in the engine compartment and near the driver's seat. Specifically, the engine compartment fuse box is positioned at the front right corner under the hood. Just open the hood and you'll see a black plastic cover - lift it to access. The other one is inside the cabin. When seated in the driver's position, look down below the dashboard near the left footwell area, where there's another small cover that can be opened. It's best to turn off the vehicle power before checking fuses to avoid electric shock or short circuits. Most lighting and electrical issues stem from fuses - if one's blown, simply replace it, but don't tamper randomly as safety comes first. I recommend checking them during routine maintenance to keep your vehicle running smoothly.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What to Do When a Car Is Full of Dents from Hail?

If a car is dented all over by hail, the dents on the body caused by hail can be flattened using metalworking techniques, followed by applying putty and repainting. The process and purpose of vehicle repainting are introduced as follows: Vehicle Repainting Process: Cleaning, inspection, evaluation, and masking; masking and degreasing; removing old paint; applying putty; sanding putty and old coatings; degreasing and masking; applying primer; sanding the intermediate primer. Purpose of Vehicle Repainting: Protective Function: Cars are widely used, have extensive activity ranges, and operate in complex environments. They are often exposed to moisture, microbes, ultraviolet rays, and other acidic or alkaline gases and liquids, and sometimes suffer from abrasions or scratches. Applying paint on the surface can protect the car from damage and extend its service life.
2
3
Share

Will the Passenger Seat Be Captured for Not Wearing a Seat Belt?

The passenger seat will be captured for not wearing a seat belt. Below are the inspection items for seat belts and an introduction to their functions: Seat Belt Inspection Items: Mainly check for any visible damage, ensure the locking mechanism functions properly, verify the retractor retracts with sufficient force, confirm the retractor locking mechanism operates normally, and ensure the sensitivity meets usage requirements. Functions of Seat Belts: Seat belts consist of safety ropes, buffers, automatic speed difference controllers, self-locking devices, straps, connectors, and adjusters. They are essential safety devices for vehicle occupants and should be regularly inspected and maintained, with timely replacements if issues arise. In the event of an emergency stop, seat belts restrain the driver and passengers in their seats to prevent forward movement, thereby protecting them from secondary collision injuries.
11
1
Share

What Causes the Front Hood of a Car to Get Hot?

Here are the reasons why the front hood of a car gets hot: 1. Engine warming up after startup: The engine begins to heat up rapidly immediately after starting, as it needs to reach a certain temperature to perform optimally. 2. Heat generated by gas combustion: The rapid combustion and expansion of the air-fuel mixture in the cylinders during ignition to drive piston movement produces significant heat. 3. Heat blown into the engine compartment: While driving, the wind generated by the car's speed and the radiator fan blows heat from the radiator into the engine compartment. Since the hood is made of metal, it heats up quickly. 4. Metal hood absorbs heat rapidly: The heat generated by the engine and radiator is dissipated to the hood. As long as the temperature gauge on the dashboard does not indicate overheating, there is no issue.
16
3
Share

What is the maximum speed limit when driving downhill?

When driving downhill, the maximum speed of motor vehicles should not exceed 30 kilometers per hour. Tips for downhill driving: 1. As the car accelerates downhill, the frequency of applying brakes to decelerate increases. Drivers should adopt appropriate braking methods according to different situations to safely and smoothly navigate downhill roads. 2. When approaching a downhill section, release the accelerator pedal and place your foot on the brake pedal, preparing to brake. During prolonged downhill driving, prolonged brake usage may lead to overheating, reducing effectiveness or even causing failure. 3. If you notice any changes in braking performance, stop and inspect as soon as possible. In case of sudden brake failure, stay calm and use the 'gear shifting' method to enhance engine resistance, while applying the handbrake to find a safe spot to stop promptly.
18
1
Share

What is the displacement of 2.5g?

2.5g refers to a 2.5-liter displacement, where 'g' represents the engine model. Below is relevant information about the 2.5g displacement: Displacement is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine releases more energy per unit time, resulting in better power performance. The function of an engine is to convert thermal energy into mechanical energy by burning and expanding gas within a sealed cylinder, pushing the piston to perform work and providing power to the vehicle. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning scale from the radiator; 4. Regularly removing carbon deposits from the engine; 5. Regularly replacing the vehicle's three filters; 6. Maintaining a reasonable engine speed.
20
0
Share

What Does Exeed Mean?

Exeed is a premium brand under Chery Automobile Co., Ltd. The name Exeed originates from 'EXCEED', where 'Ex' represents the starry sky, an unknown realm always yearning to be explored, and 'eed' symbolizes the journey, a continuous process of surpassing. Introduction to Exeed: 1. Design: Guided by Kevin Rice, Deputy Design Director and Global Chief Designer, it adopts a simple and pure design style to express the intelligent and premium brand essence of Exeed. 2. Driving and Control: Equipped with a new-generation 1.6TGDI engine delivering 145KW of power and 290Nm of torque, a highly efficient 7-speed dual-clutch transmission, a reliable and safe chassis system meticulously crafted by Benteler, and BorgWarner's intelligent all-wheel-drive system. 3. Safety: Features 11 advanced ADAS driver assistance systems leading in its class and the new-generation BOSCH 9.3 electronic stability control system.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.