Where is the fuse box located in the 2017 Jetta?

1 Answers
LeNorah
07/29/25 12:32pm
The fuse box is located under the driver's seat. The car fuse box is an overcurrent protection switch, mainly used to control the working power of the circuit. Specific details are as follows: 1. Material: The car fuse box is used to install car fuses. According to the size of the installed fuses, it can be divided into: small car fuse box; medium car fuse box; large car fuse box. Common injection molding materials include: plastic, nylon, bakelite, and PBT engineering plastic, each with different high-temperature resistance levels. 2. Classification of car fuse boxes: According to the type of installed fuses, they can be divided into fuse tube boxes and fuse strip boxes; according to the size of the fuses, they can be divided into large fuse boxes, medium fuse boxes, and small fuse boxes; according to the material, they can be divided into plastic fuse boxes and bakelite fuse boxes; according to environmental standards, they can be divided into eco-friendly fuse boxes and non-eco-friendly fuse boxes; according to the installation method, they can be divided into lead-type fuse boxes and circuit board-type fuse boxes, as well as instrument panel-mounted fuse boxes.
Was this review help?
12
1
Share
More Forum Discussions

How Long Does a Dash Cam Record?

The recording duration of a dash cam depends on the capacity of the memory card and the resolution of the recorded video. Here are some details about dash cams: Recording duration of a dash cam: With 1080P resolution, a 16GB memory card can record for 90 minutes; a 32GB memory card can record for 180 minutes; and a 64GB memory card can record for 360 minutes. The recording time varies based on the memory card capacity and the video resolution. Higher resolution takes up more memory, and a larger capacity memory card allows for longer recording times. Specific recording details: A single-lens dash cam typically only records the outside of the vehicle and can capture interior sounds. However, if the camera is pointed inside the car, it will record the interior. A dual-lens dash cam can record both the interior and exterior of the vehicle.
8
0
Share

Will Replacing the Steering Wheel Affect the Clock Spring?

Replacing the steering wheel can affect the clock spring. Basis for judgment: For instance, changing the steering wheel may sometimes prevent the clock spring from aligning properly. If the clock spring is not aligned correctly, it can be pulled and broken when turning the steering wheel while driving, leading to issues such as the horn not working or the airbag warning light turning on. Function of the clock spring: The clock spring is a ring-shaped component that connects the airbag. Its design ensures that current can still flow to the airbag while the steering wheel is being rotated, without the internal wires breaking due to frequent twisting. This ensures the airbag functions correctly at all times. If the clock spring malfunctions, the airbag may become inoperable, and in cases of accidental grounding, it might even deploy unexpectedly.
4
2
Share

What are the reasons for the car body crossing the line during reverse parking?

The reason for the car body crossing the line during reverse parking is turning the steering wheel too early at the starting point of reverse parking. Here is a detailed introduction to the reverse parking method: Identify the starting point: Take right-side reverse parking as an example. When reversing, use the lower edge of the left rearview mirror as a reference. When the two align, turn the steering wheel fully to the right and continue reversing. Control the corner point: Pay attention to the changing distance between the corner point of the parking space and the car body. When the car body is parallel to the parking line, turn the steering wheel back one and a half turns in one motion.
14
2
Share

Why Are Cruiser Motorcycles Not Popular Anymore?

Cruiser motorcycles are not popular now possibly due to their mature styling and limited target audience. Here are the specific reasons: Mature Styling: Cruiser motorcycles typically feature a high handlebar and low seat design, which gives them a relatively older and more conservative appearance. While riding one might look imposing, compared to street bikes or sports bikes, cruisers can seem a bit 'greasy'—similar to the difference between a Maybach and a Ferrari. Maybachs are excellent, but younger people tend to prefer Ferraris. Limited Target Audience: Cruisers give off a mature vibe, so their riders are often older. In overseas markets, middle-aged individuals might ride motorcycles more frequently, but in China, consumers of that age tend to focus more on family responsibilities. Very few maintain the passion for riding, so not many middle-aged people buy cruisers, and younger riders generally don't favor them either.
6
1
Share

What is the angle of a motorcycle rear shock absorber?

Motorcycle rear shock absorber angle is 45-50 degrees. Structure of motorcycle shock absorbers: According to installation position, there are front shock absorbers and rear shock absorbers; by structural form, there are telescopic fork hydraulic shock absorbers, which are currently the most widely used front shock absorbers in motorcycles; swingarm shock absorbers, swingarm lever vertical center shock absorbers, swingarm lever inclined center shock absorbers; by oil cylinder working position, there are inverted shock absorbers, where the oil cylinder is positioned above and the piston rod below. Causes of motorcycle shock absorber oil leakage: The main reasons for shock absorber oil leakage include the following aspects: Oil seal failure, where the rubber material of the oil seal is damaged or hardened and loses elasticity, the sharp edge of the oil seal wears and becomes an arc shape, losing its oil scraping ability, the spring of the oil seal falls off or weakens in elasticity, causing the oil seal to fail and resulting in oil leakage.
8
0
Share

What Causes the Gear Indicator Light in an Automatic Transmission to Not Illuminate?

Reasons why the gear indicator light in an automatic transmission does not illuminate: 1. Faulty gear position switch; 2. PCM (Powertrain Control Module) malfunction; 3. Internal transmission failure; 4. Damaged gear indicator light module. If the gear display in an automatic transmission is abnormal, check whether the gear position switch has a short circuit or open circuit, or if it has been exposed to water. You can connect a diagnostic computer to determine whether it is an electronic fault with the gear position switch or an electrical fault with the instrument display. Replace any damaged components as needed. The gears in an automatic transmission include P, R, N, D, S, and L, representing Park, Reverse, Neutral, Drive, Sport mode, and Low gear, respectively. A faulty gear position switch may fail to display the correct gear indicator, and in severe cases, it can lead to gear shifting confusion, inability to shift gears, resulting in insufficient vehicle power and affecting the transmission's lifespan.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.