···
Log in / Register

Where is the fuse box located in the 2017 Jetta?

4 Answers
Kennedy
07/24/25 5:59pm

The fuse box of the 2017 Jetta is located next to the engine, in front of the steering wheel, and can be seen when the hood is opened. Below are the specific details about the 2017 Jetta: Model: A compact 4-door 5-seater sedan. Body dimensions: Length, width, and height are 4501mm, 1704mm, and 1469mm respectively. The wheelbase is 2604mm. Engine: Equipped with a 1.4L naturally aspirated engine, with a maximum horsepower of 90PS and a maximum torque of 132NM. It is paired with a 5-speed manual transmission, and the top speed is 181km/h.

Was this review help?
16
3
Share
ColtonFitz
08/10/25 8:22am

I've also driven a 2017 Jetta, and I remember the fuse box locations are quite straightforward. The main one is in the engine compartment—after lifting the hood, you'll find it in the front left corner near the windshield and battery. It's a black plastic-covered box that pops open when pressed, revealing densely packed fuses. There's also a secondary one inside the cabin, located on the inner side of the dashboard below the steering wheel, just above where your left foot rests. You can feel a small cover there; gently pull it to open. I've fixed a few issues myself, like lighting problems, by locating and replacing the corresponding fuses from here—just using regular pliers. Always ensure the car is turned off and the key is removed before working to avoid electric shock. Different fuses control different components, such as the cigarette lighter or audio system. The box cover usually has a diagram; if not, refer to the owner's manual. DIY repairs like this save money and time, and regular checks can prevent unexpected issues. The design makes them easily accessible, even for beginners, but those without experience should start with simpler tasks.

Was this review help?
9
2
Share
Expand All
DiBennett
09/26/25 2:45am

As someone who enjoys DIY car repairs, I'm quite familiar with the fuse boxes of the 2017 Jetta. The one in the engine compartment is located above the driver's side wheel, beneath the windshield – it's a square black box that opens by pressing a button. The other fuse box inside the cabin is positioned under the steering wheel, within the dashboard above the footwell area; pulling a small handle reveals all the fuses. I often use these access points to check circuits during repairs, like inspecting whether the headlight fuse has blown. The locations are well chosen – dust-proof yet easily accessible. The procedure is to open the hood or simply sit in the car, turn off the ignition, open the cover to check fuse conditions, and replace any blown fuses with new ones of matching specifications. The tools required are simple; household pliers will do, but never attempt this while the engine is running. Jetta's design makes DIY repairs easier and helps prevent malfunctions. I recommend first understanding the purpose of different fuses to avoid issues from random removal.

Was this review help?
11
1
Share
Expand All
LeilaAnn
11/09/25 4:48am

The location of the fuse box in the 2017 Jetta prioritizes safety. It's typically found on the left front side of the engine compartment, near the windshield after opening the hood—just press the latch to open the small plastic box. There's also one inside the cabin under the dashboard by the driver's left foot; pull the panel to access the fuses. Always turn off the engine before checking, and avoid touching any metal parts to prevent electric shock. These placements ensure convenience without obstruction. Simply use both hands to open the cover, inspect for burnt or broken fuses, and replace any faulty ones promptly. This maintains circuit safety and prevents short circuits. For daily driving, keep the fuse box free of dust and water to prolong its lifespan.

Was this review help?
13
0
Share
Expand All
More Forum Discussions

How to Replace the Battery in a Toyota Electronic Key?

The method to replace the battery in a Toyota car key is as follows: Hold the remote key facing upwards, use a small flat-head screwdriver to gently pry into the middle of the gap. The key will separate slightly, creating a gap of about 2mm. Then, separate the key into two parts to access the battery compartment. Gently split the key along the middle gap, and finally remove the old battery and replace it with a new one. Below are the detailed steps: First, prepare the necessary tools for battery replacement: 1 flat-head screwdriver, the car key that needs a battery replacement, and a new battery. Step 1: There is a round button on the side of the car key. Press this button with one hand while pulling out the mechanical key with the other hand. Step 2: Hold the key with one hand and the flat-head screwdriver with the other. Locate the gap in the middle of the top part of the key and insert the flat-head screwdriver into it. Pry the key up and down until a gap is created. If the key doesn't budge, gradually increase the force until it moves. Step 3: Remove the key's circuit board and gently push one side of the battery with your finger to remove it. Place the new battery with the positive side facing up into the battery slot of the key. Gently push the battery until it is fully secured. Step 4: Cover the key's circuit board back onto the key, align the two separated halves of the key, and press both sides of the key with your hands until the upper and lower parts are completely fitted together. Then, insert the mechanical key back into the key gap to complete the process. Summary: If the key does not function properly after following the above steps, disassemble the key again to check if the battery was installed incorrectly (wrong side up). If the battery orientation is correct, then the issue may lie with the key itself.
6
4
Share

How to Replace the Battery of a Geely Emgrand Car Key?

Geely Emgrand car key replacement method is as follows: 1. Press the button next to the car key to take out the mechanical key; 2. Find the small slot next to 'open' and use a flat-head screwdriver to open it; 3. Turn counterclockwise to open the slot and gently pry it open with your hand; 4. Remove the battery that needs to be replaced and take out the button battery for replacement. More information about the Geely Emgrand is as follows: 1. The Emgrand has launched two versions, the Sport version and the Elegant version, with two displacements, 1.3T and 1.8L, totaling 11 models. 2. In the name Emgrand GS, the letter G stands for Grand, interpreting its larger body size and space. The letter S stands for Sporty, as the Emgrand GS design incorporates the crossover SUV style with the aesthetic concept of sporty mimicry design.
14
3
Share

What Causes White Smoke from a Car's Exhaust Pipe in Winter?

White smoke is actually just water vapor attached to the inner wall of the exhaust pipe muffler. Since the exhaust gas coming out of the pipe is at a high temperature, this hot water vapor rapidly cools when expelled from the exhaust pipe, quickly condensing into visible small water droplets. Here are the sources of water vapor in the exhaust pipe: 1. In most cases, it comes from the air. 2. Impure fuel containing a relatively high amount of water vapor. 3. A dirty air filter causing insufficient air intake. 4. Older carburetor-equipped family cars with carburetor malfunctions. 5. Modern fuel-injected cars without carburetors where the oxygen sensor in the exhaust pipe is contaminated, failing to provide the correct information to the engine control unit. 6. Damaged cylinder head gasket or cylinder liner allowing coolant to enter the cylinder. 7. Vehicles frequently driven short distances where moisture in the exhaust pipe cannot be fully expelled in time, leading to water accumulation.
17
3
Share

Where is the child safety lock on the Volkswagen Lavida?

Lavida's child safety lock is located on the side of the rear door and is an orange-red button. The following is a related introduction to the child safety lock: 1. The rotary child safety lock requires the use of a key (or key-shaped object) inserted into the corresponding hole to rotate the knob switch for locking and unlocking operations. Below is how to operate the rotary child safety lock: (1) Activation: Insert the mechanical key into the hole and rotate it in the direction indicated by the connector (usually clockwise) until it is tightened. (2) Deactivation: Rotate the keyhole in the opposite direction to unlock the child lock. 2. The toggle-type child safety lock is more convenient to use. Below is how to operate the toggle-type child lock: (1) Activation: Push the toggle lever (in the direction of the arrow) to complete the locking operation of the child safety lock. (2) Deactivation: Push the toggle lever all the way in the opposite direction of the arrow to deactivate the child safety lock.
2
3
Share

Can 84 Disinfectant Be Used for Vehicle Disinfection?

84 disinfectant can be used for interior disinfection in vehicles, but car owners must ensure it is diluted before wiping the car's interior. Additionally, it is advisable to wear rubber gloves when using 84 disinfectant to avoid corrosion from the solution. While cleaning the interior, it is recommended to keep the car doors open and ventilate the area for some time after wiping to eliminate the odor. Below are some relevant details about 84 disinfectant: 1. 84 disinfectant is a commonly used disinfectant in daily life, primarily composed of sodium hypochlorite, which has strong disinfecting properties and noticeable bleaching effects. If car owners intend to use 84 disinfectant for cleaning the car's interior, they must follow the dilution ratio specified on the product packaging and mix it with water beforehand. 2. If 84 disinfectant is not properly diluted, the resulting solution can be corrosive and may damage the car's interior. Using undiluted 84 disinfectant on the interior can leave white stains, and for vehicles with metal-based interior materials, it may cause discoloration or oxidation.
2
1
Share

What is the correct method to measure engine oil?

Here is the correct way to check engine oil: 1. Smell test. Pull out the dipstick and smell it closely. If there is a strong sour odor, it indicates the oil has deteriorated and should be changed. 2. Rubbing method. Rub the extracted old oil repeatedly between your thumb and forefinger. Good-quality oil will feel lubricated, produce little residue, and have no friction. If you feel impurities, poor viscosity, or even a gritty sensation, it should be changed. 3. Color test. Take a clean white filter paper (or a good-quality tissue), drip a few drops of old oil on it, and observe the color after the oil has seeped through. Good-quality oil will have no powder, feel dry and smooth to the touch, and show a clear yellow infiltration zone. If it appears dark brown or has impurities, it should be changed. 4. Light test. Hold the dipstick at a 45-degree angle under light and observe the oil droplets. If you can clearly see no residue in the droplets, the oil is still good. If there is a lot of residue, it should be changed.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.