Where is the fuse box located in Dongfeng Tianlong?

1 Answers
Jane
07/29/25 8:20pm
For the Dongfeng Tianlong KL465 model, the fuse box is located at the front of the vehicle. You can see the fuse box by opening the car's hood. Location of the fuse box: Generally, vehicles have two fuse boxes: one inside the cabin and another in the engine compartment. The fuse box inside the cabin is usually located in the center console, and replacing a fuse may require removing interior panels. Fuses come in different types, with some capable of handling small currents and others designed for larger currents. Types of fuse boxes: Fuse boxes can be categorized based on the type of fuses they hold: fuse tube boxes and fuse strip boxes. By size, they can be divided into large, medium, and small fuse boxes. By material, they can be plastic or bakelite fuse boxes. Environmentally friendly fuse boxes are another category. By installation method, they can be lead-type fuse boxes, circuit board-type fuse boxes, or instrument panel-mounted fuse boxes. Method for replacing fuses: The fuse box contains a manual that lists the corresponding numbers and functions of each fuse. After locating the cigarette lighter fuse in the manual, find the corresponding numbered fuse in the box. Generally, car owners can replace fuses themselves. When removing a fuse, always use the small tweezers provided in the fuse box—never use your hands. If a particular fuse in the vehicle frequently blows, it's advisable to keep spare fuses in the car. Some vehicles come with spare fuses included in the fuse box.
Was this review help?
6
2
Share
More Forum Discussions

When should a new car go for maintenance?

New cars should be maintained every 3 months or every 5,000±500 kilometers, whichever comes first. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. New car maintenance generally involves six major inspection parts: 1. Change the engine oil, and it is necessary to clean the three filters, namely the oil filter, fuel filter, and air filter; 2. Check whether the coolant level of the car is in a normal state; 3. Check the position of the brake and clutch fluid levels; 4. Check whether the power steering fluid level is normal and whether there is any oil leakage at the oil pipe interfaces; 5. Check the aging and tension of the generator, air conditioner, water pump, and belts; 6. Check the tire pressure and wear condition, inflate the tires, or perform tire rotation if there is wear.
15
4
Share

What Does Custom Tuning Mean?

Custom tuning refers to adjustments made based on the car's model, driving habits, and actual vehicle conditions. Without custom tuning, engines of the same displacement may have different ECU computers and production years, leading to inconsistent horsepower output before and after program optimization. More details are as follows: 1. A good tuning program needs to match the owner's driving habits, the car's software, and hardware. If only the car's hardware is upgraded without optimizing the software, the car's performance cannot be fully utilized. 2. Each driver has different driving habits, and different driving habits require different software needs. If the car frequently drives on highways, the owner may have certain demands for engine horsepower. If the car often drives in urban areas, the owner may have certain demands for engine torque output. Therefore, not all programs are called custom tuning programs, and not all optimization solutions are suitable for every car. Only the program that suits your car is the best. 3. It is important to note that when upgrading the car's hardware, it must be compatible with the car's software; otherwise, the hardware cannot perform to its full potential.
10
4
Share

How to Clean a Dirty Car Roof Liner?

Methods for cleaning a car roof liner are as follows: 1. First, remove surface dust. Start by reclining the seats and covering them with a towel or large plastic sheet. Then use a vacuum cleaner to remove dust. If a vacuum cleaner is not available, use a dry brush to perform a simple cleaning of the interior roof liner to remove easily detachable dust and dirt. 2. For stubborn stains that cannot be wiped off with a dry towel, use some high-quality cleaning products. Spray a neutral foam cleaner onto the fabric surface of the interior roof liner, let it sit for 5-10 minutes, and then gently wipe repeatedly with a soft cleaning brush or fine-textured car cleaning cloth. Be very gentle during the process to avoid damaging the roof liner fabric. Also, ensure to wipe in a systematic and orderly manner, avoiding back-and-forth rubbing. 3. Wipe off foam and stains. Use a wrung-out cotton cloth to smooth along the direction of the interior roof liner's fabric to avoid wetting the liner, which may make it difficult to dry. Residual foam cleaner can cause the fabric of the interior liner to harden or even discolor, so this step should be repeated several times to thoroughly clean the interior liner.
16
3
Share

What happens if the tire pressure is too high?

The tire pressure warning light will illuminate, indicating the need for tire inspection and pressure adjustment. According to the requirements and regulations of the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts.
4
0
Share

How to Reset the Tire Pressure Light on Volkswagen Golf 7?

Method to reset the tire pressure monitoring system on Volkswagen Golf 7: First, turn on the ignition, then press and hold the tire pressure monitoring reset button. After hearing a "beep" sound, release the button. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It then transmits the pressure information from inside the tire to a central receiver module via a wireless transmitter, which displays the tire pressure data for each tire. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the speed differences between the tires, the system monitors the tire pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the above systems. It is equipped with direct sensors in two diagonally opposite tires and also includes a 4-wheel indirect system.
3
1
Share

Can National 5 Vehicles Be Transferred to Hainan?

Hainan Provincial Government Office recently issued the "Announcement on Light-Duty Vehicles Implementing the National Sixth Stage Vehicle Emission Standards," clearly stating that from July 1, 2019, light-duty vehicles registered within the administrative region of Hainan must comply with the "National 6 Standard" requirements, and the registration of light-duty vehicles below the "National 6 Standard" is prohibited. Below are the extended details regarding the transfer: 1. Transfer Procedures: After July 1, if light-duty vehicles with out-of-province license plates are to be relocated to Hainan, they must meet the "National 6 Standard" and obtain an incremental allocation indicator. Light-duty vehicles that meet the "National 5 Standard" and have already completed the transfer-out procedures at the local vehicle management office before June 30 but have not completed the transfer-in procedures in Hainan can continue to do so after July 1. For second-hand light-duty vehicles within the province that do not meet the "National 6 Standard," if they have obtained an incremental allocation indicator and are not "yellow-label vehicles" or are within one year (including one year) of their service life, they can still continue to undergo transfer registration after July 1. 2. Impact: The implementation of the National 6 emission standards will have a certain impact on the second-hand vehicle market. For regions where the National 6 emission standards have not yet been implemented, the impact on the second-hand vehicle market is minimal.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.