Where is the fuse box located in a Cadillac ATS?

What Causes the Jerking Sensation When Braking in an Automatic Transmission Car?

Automatic transmission cars experiencing a jerking sensation when braking is often caused by sludge circulating within the transmission fluid, which can clog the oil passages in the valve body. Tips for transmission maintenance: Regularly check the automatic transmission fluid level—unlike engine oil, which is checked when the engine is cold, automatic transmission fluid should be warmed to approximately 50 degrees Celsius. Then, shift the gear lever through each position for 2 seconds before placing it in park. At this point, the dipstick's normal fluid level should be between the high and low marks. Add automatic transmission protectant to the transmission at a ratio of 5%. For older vehicles, it's advisable to add a bottle of automatic transmission leak stopper to restore aging seals and prevent leaks. Understand the replacement cycle for automatic transmission fluid: generally, it should be changed every 2 years or 40,000 to 60,000 kilometers. During normal operation, automatic transmission fluid operates at around 120 degrees Celsius, so it's essential to use high-quality transmission fluid.

2

Share

What are the impacts of not scrapping a private car on the owner?

The impacts of not scrapping a private car on the owner are as follows: 1. Registered under the owner's name: If the car is registered under the owner's name, it may affect the renewal or annual inspection of the driver's license. Driving a scrapped vehicle, once detected, will result in fines, revocation of the driver's license, mandatory scrapping of the vehicle, and payment of associated costs. 2. Exploitation by criminals: If the owner sells the car as scrap, some criminals may retain the vehicle's identification marks such as the engine number and chassis number, and install them on other vehicles. If such a modified vehicle is involved in an accident, authorities can trace these identifiers back to the original owner, who may face trouble and unnecessary losses.

13

1

Share

Are the Dash Cam and Rearview Camera Integrated as One Unit?

The dash cam and rearview camera are not necessarily integrated as one unit; it primarily depends on the type of dash cam installed in the vehicle. There are two types of dash cams: one type is integrated with the rearview camera, displaying the rearview image on the dash cam screen when the vehicle is in reverse. The other type operates separately, making it more convenient to use both the dash cam and rearview camera without interference. Main functions of the dash cam: It helps protect the legal rights of the driver by providing video evidence. Recorded footage can be replayed to determine fault in traffic accidents. It effectively prevents fraudulent claims and roadside robberies, as the video from the dash cam can serve as evidence. It also records the route taken during road trips and any incidents that occur along the way. Functions of the rearview camera: It provides safety assistance for reversing vehicles. The rearview camera is also known as a parking assist system, reverse visual system, or onboard monitoring system. It is widely used across various vehicle types, including small, medium, and large vehicles, making it an excellent auxiliary configuration for vehicles.

19

4

Share

What are the items in Subject 3?

There are 16 items in the C1 Subject 3 test, some of which are as follows: Preparation for getting on the car: The examinee must follow the instructions of the safety officer, approach the car body, walk around the car for a week, and open the car door to get on the car after confirming safety. After getting on the car, when hearing the voice prompt "Please prepare for the test and perform fingerprint verification," first adjust the seat to a suitable position, adjust the inner and outer rearview mirrors, and fasten the seat belt. Then perform fingerprint verification. The fingerprint device is located below the air conditioning vent on the left side of the steering wheel. Night driving: After successful fingerprint verification, before starting during the daytime test, the examinee should start the light operation when hearing the voice prompt "The simulation of night light usage will start now, please operate according to the voice prompt." The night driving light simulation test will randomly select three items from the following for the test. Driving: When hearing the voice prompt "Please start," step on the clutch, shift into first gear, turn on the left turn signal (for more than 3 seconds), observe the left rearview mirror (turn left head), confirm safety, honk the horn, release the parking brake, and start smoothly, then turn off the turn signal. Rolling back is prohibited when starting on a slope.

13

5

Share

What are the consequences of deducting 12 points?

If all 12 points on your driver's license are deducted, your license will be temporarily suspended. The driver must report to the traffic management department of the public security authority at the place where the license was issued or where the violation occurred within 15 days to attend a seven-day study session on road traffic safety laws, regulations, and related knowledge. After passing the study and examination, the deducted points will be cleared, and the license will be returned. If 12 points are deducted during the probationary period of the license, the license will be revoked. Related information: Point reset: The points on a driver's license are reset every scoring cycle, with each cycle lasting 12 months. Behaviors leading to 12-point deduction: Reversing, driving in the wrong direction, or making a U-turn across the central divider on a highway; speeding more than 50% over the limit; drunk driving; fleeing the scene of an accident without constituting a crime; failing to display, forging, altering, or improperly installing license plates; intentionally obscuring or damaging license plates; installing license plates not in compliance with regulations.

2

Share

What are the trunk dimensions of the Tayron?

The dimensions are 900mm in depth, 1000mm in width, and 740mm in height. Below is some related information: 1. Introduction: The Volkswagen 2.0T engine comes in high and low power versions. The low-power engine has a maximum output of 186 horsepower and a peak torque of 320N·m, while the high-power engine has a maximum output of 220 horsepower and a peak torque of 350N·m, both paired with a 7-speed dual-clutch transmission. 2. Change in gasoline: From 95-octane to 98-octane gasoline, the increase in gasoline grade represents an upgrade in the octane value, and the higher the octane value, the better the fuel's anti-knock performance, which is more conducive to the operation of high-performance engines. Of course, the price difference between 95-octane and 98-octane gasoline is also quite significant. The recommended fuel for the Tayron has been upgraded from 95-octane to 98-octane, which significantly increases daily driving costs and is not conducive to the new car's market competitiveness.

4

0

Share

Where is the fuse box located in a Cadillac ATS?

What Causes the Jerking Sensation When Braking in an Automatic Transmission Car?

What are the impacts of not scrapping a private car on the owner?

Are the Dash Cam and Rearview Camera Integrated as One Unit?

What are the items in Subject 3?

What are the consequences of deducting 12 points?

What are the trunk dimensions of the Tayron?

What brand of transmission oil should be used for the 10th-generation Civic?

Is There Any Impact When Driving Through Water That Reaches Half of the Tire?

What is the real fuel consumption of the 2021 Volvo XC60?

Is a tire pressure of 192 kPa indicating a puncture?