···
Log in / Register

Where is the fuse box located in a BMW Mini?

4 Answers
CooperAnn
07/30/25 12:45am

MINI has two fuse boxes, each responsible for different electrical circuits. Here are the locations of the fuse boxes in a BMW Mini: 1. One is located in the engine compartment, managing fuses for external electrical components. 2. The other is near the driver's left side, handling fuses for internal electrical components. Here are some precautions regarding car fuses: 1. If the fuse box cover protecting the fuses is missing, ensure the fuses are not left exposed to prevent short circuits. 2. When covering the fuses, do not use other materials as substitutes, as the fuse box is made of insulating and heat-resistant materials. 3. Using improper materials to cover the fuses may pose a fire hazard.

Was this review help?
13
1
Share
StFelix
08/15/25 5:58am

I've driven several generations of BMW Minis, and the location of the fuse box varies slightly depending on the model. In most models, the fuse box is installed under the dashboard panel near the driver's footwell—you'll need to crouch down and gently pry open the plastic cover to see it. Some older versions might have it near the passenger footwell or under the hood close to the battery. Once, while helping a friend fix their car, I even found auxiliary fuses under the rear seat trunk lid, but the main fuse box is usually on the driver's side. I recommend checking the user manual to confirm the exact location to avoid unnecessary hassle. Don’t randomly pull out fuses yourself, as it can cause issues—for safety, it’s best to have it handled at an authorized 4S shop.

Was this review help?
12
3
Share
Expand All
StevenMarie
10/20/25 3:08am

A few days ago, I checked my BMW Mini Cooper, and the fuse box is located above the foot mat on the passenger side. Just pull open that small black panel cover, and it's revealed—the design is quite hidden. I followed a YouTube tutorial to try it, and it wasn't hard to find, but be careful not to damage the wires. The location might vary slightly depending on the model year. I tested it on a 2018 model, and it was in the standard spot. Remember to turn off the power and keep the car key off when checking to avoid short circuits or sparks. If you're unsure, it's safer to search for detailed videos of your car model or consult a mechanic.

Was this review help?
19
5
Share
Expand All
MacCassandra
12/03/25 3:40am

During DIY car repairs, I found that the BMW Mini fuse box is usually located near the footwell under the steering wheel. First, remove the clips on the cover and gently lift it open—the box is fixed inside with a row of small fuses. Some models may have an additional fuse box in places like the trunk lid or near the firewall in the engine bay, depending on the production year. Based on my experience, most are on the driver's side. Avoid using excessive force with tools when removing to prevent damaging the circuit board—safety first. Before handling fuses, disconnect the vehicle's power to confirm the issue—simple and hassle-free.

Was this review help?
5
5
Share
Expand All
More Forum Discussions

What engine does the Lynk & Co 01 New Energy use?

Lynk & Co 01 New Energy model is equipped with the Drive-E series VEP4-2.0TD engine. This engine has a displacement of 2.0L and adopts an inline four-cylinder structure. The engine follows a modular design concept and is equipped with different turbocharging forms. Below is an introduction to the Drive-E series VEP4-2.0TD engine used in the Lynk & Co 01 New Energy model: 1. The engine used in the Lynk & Co 01 achieves maximum torque at 1400 rpm. This engine has a maximum power of 140kw and a maximum torque of 300 N·m. When it comes to this series of engines, it's worth mentioning its achievements—this engine has won the Ward's 10 Best Engines award for three consecutive years. 2. The 2.0TD engine used in the Lynk & Co 01 shares the same basic parameters as the Volvo T4 engine, but this engine has undergone special tuning for different vehicle models, ensuring perfect compatibility with various models. 3. The significance of the Drive-E powertrain lies in breaking through the limitations of cylinder count while also constraining engine performance. Although the engine has a small displacement, it is more efficient and has lower emissions. In summary, this engine achieves a perfect balance between power and environmental friendliness. Because this engine adopts a centrally located fuel injector design, it allows for more thorough mixing of fuel and air, improving the engine's fuel efficiency and reducing the vehicle's fuel consumption.
15
5
Share

What to Do If the Car Water Pump Is Leaking?

Solutions for car water pump leakage: 1. If the leakage is at the pipe connection, it is less likely to occur with a newly installed pump. It is recommended to disassemble and reinstall. 2. If the pump leaks while pumping water, it is usually due to a leaking water seal. It is advised to disassemble the pump and replace the water seal. 3. Long-term leakage may be caused by the absence of a check valve on the outlet side of the pump. It is recommended to install a check valve. Working principle of the car water pump: The engine drives the pump bearing and impeller through the pulley. The coolant in the pump is rotated by the impeller and, under centrifugal force, is thrown to the edge of the pump housing, generating pressure before flowing out through the outlet or pipe. The center of the impeller experiences reduced pressure as the coolant is thrown outward, causing coolant from the radiator to be drawn into the impeller through the pipe due to the pressure difference between the pump inlet and the impeller center, achieving a reciprocating cycle of the coolant.
20
1
Share

Where is the battery located in the Mercedes-Benz ML350?

The battery of the Mercedes-Benz ML350 is located under the front passenger seat. You need to move the seat all the way forward or backward, then remove the cover panel to access it. During the battery replacement process for the ML350, it is crucial not to disconnect the power, as this could lock the vehicle's computer system. To maintain continuous power supply, ensure the new battery is fully charged and use a jump-start method when replacing. The Mercedes-Benz ML350 is a model under the Mercedes-Benz brand, with body dimensions of 4804mm in length, 1926mm in width, and 1796mm in height, and a wheelbase of 2915mm. The ML350 features a predominantly dark color scheme for its body, with the dashboard adorned with high-quality wood trim. The steering wheel offers a visually robust feel, and the meticulously designed smooth lines contribute to an extraordinary interior aesthetic.
19
4
Share

What class of car is the Bora?

The Bora belongs to the compact sedan category, meaning it has an overall length between 4.2 to 4.6 meters, a wheelbase ranging from 2.4 to 2.7 meters, and typically features an engine displacement of around 1.6 to 2.0 liters. The Bora is FAW-Volkswagen's first independently designed model, with body dimensions measuring 4663mm in length, 1815mm in width, and 1473mm in height, along with a wheelbase of 2688mm. The Bora is equipped with two engine options: a 1.4-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.5-liter naturally aspirated engine delivers a maximum power of 83 kilowatts and a peak torque of 145 Newton-meters, paired with either a 5-speed manual transmission or a 6-speed automatic transmission. The 1.4-liter turbocharged engine produces a maximum power of 110 kilowatts and a peak torque of 250 Newton-meters, mated to a 7-speed dual-clutch transmission.
12
0
Share

What is the cooling principle of car air conditioning?

Car air conditioning cooling principle refers to the operational mechanism of air conditioning refrigeration. After the air conditioner is powered on, the low-pressure refrigerant vapor in the refrigeration system is sucked in and compressed into high-pressure vapor by the compressor, then discharged to the condenser. The indoor air continuously circulates, achieving the purpose of lowering the temperature. The outdoor air drawn in by the axial fan flows through the condenser, carrying away the heat released by the refrigerant, causing the high-pressure refrigerant vapor to condense into high-pressure liquid. The high-pressure liquid passes through the filter and throttle mechanism before being sprayed into the evaporator, where it evaporates under the corresponding low pressure, absorbing heat from the surroundings. Simultaneously, the cross-flow fan causes air to continuously enter the spaces between the evaporator fins for heat exchange, and the cooled air after releasing heat is directed into the cabin.
4
2
Share

Is the engine of the Geely Boyue a three-cylinder or four-cylinder?

Geely Boyue 2018 model is equipped with a four-cylinder engine, while the 2019 1.5T model features a three-cylinder turbocharged engine. The Geely Boyue is a compact SUV with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. In terms of configuration, the vehicle is equipped with convenience and entertainment features such as electric mirror adjustment, one-button start, an 8-inch central control screen, and the GKUI vehicle system. It also offers ESP, TCS, brake assist, emergency braking reminder, front dual airbags, cruise control, tire pressure monitoring, electronic handbrake, and automatic parking.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.