Where is the fuse box in the Volkswagen Tayron?

1 Answers
OBethany
07/25/25 7:46am
Volkswagen Tayron's fuse box is located on the left side of the dashboard, inside the panel above the driver's footwell. Steps to replace a fuse: 1. Preparations: Turn off the engine and all electrical devices. 2. Locate the fuse box position, carefully pry open the panel using a screwdriver or other tools. On the inner side of the panel, you can find the corresponding fuse based on the provided information. 3. Use a test pen to check if the fuse is blown. If it's damaged, remove it with tweezers and replace it. 4. When replacing, ensure to use a fuse with the same current and other parameters. 5. After replacement, check if the corresponding component is functioning properly. If not, promptly send it to a repair shop. Fuse-related precautions: 1. Installing fuses with different parameters may lead to serious hazards such as explosions and fires. 2. Installing a fuse with a current rating higher than specified can easily cause component overload and damage. 3. Do not splice broken fuses. 4. Items like metal wires cannot substitute for fuses.
Was this review help?
19
0
Share
More Forum Discussions

Is Elysion a Dongfeng Honda or GAC Honda?

Elysion is a Dongfeng Honda, it is an MPV model under Dongfeng Honda. Taking the 2019 Elysion as an example, its body dimensions are: length 4950mm, width 1842mm, height 1711mm, wheelbase 2900mm, and body weight 1941kg. The 2019 Elysion has a front suspension of MacPherson independent suspension and rear suspension of torsion beam non-independent suspension. It is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 146ps, maximum torque of 175Nm, maximum power of 107kW, and is matched with an electronic continuously variable transmission.
7
1
Share

What Causes ABS Failure?

ABS failure can be caused by: 1. Faulty wheel speed sensors, ABS wiring, ABS pressure control solenoid valves, or ABS computer; 2. Insufficient brake fluid; 3. Dirty ABS sensors. The method to reset the ABS warning light is: Simply disconnect the ABS power source in the engine compartment. The functions of ABS are: 1. Maximize braking efficiency, reducing braking time and distance; 2. Effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; 3. Allow steering during emergency braking, maintaining good steering control; 4. Reduce tire wear by minimizing intense friction between tires and the road surface.
14
5
Share

What Causes Car Shaking When Accelerating Hard?

The reasons for car shaking when accelerating hard are: 1. Excessive spark plug electrode gap; 2. Faulty ignition coil; 3. Loose engine underguard screws; 4. Severe carbon buildup in engine, throttle valve, intake manifold, or valves; 5. Poor fuel quality. Solutions for car shaking when accelerating hard include: 1. Adjusting spark plug gap or replacing spark plugs; 2. Checking fuel pressure and cleaning fuel injectors; 3. Testing cylinder compression; 4. Cleaning throttle body, fuel filter, and fuel lines; 5. Engine maintenance and repair; 6. Inspecting coolant temperature sensor; 7. Replacing with appropriate engine oil.
14
0
Share

Why Do Brakes Make Noise?

Brakes make noise due to the following reasons: 1. Rust on brake discs or pads; 2. Newly installed brake pads; 3. Excessive wear of brake discs or pads; 4. Incorrect installation or mismatched brake pad models; 5. Use of low-quality or overly hard brake pads; 6. Abnormal brake calipers or insufficient brake fluid; 7. Foreign objects between brake drums/discs and pads. Solutions for noisy brakes include: 1. Applying grease or specialized lubricant at the connection between brake pads and calipers; 2. Regular inspection and replacement of brake pads; 3. Periodic brake adjustment; 4. Avoiding frequent brake usage.
10
2
Share

How to resolve the ABS warning light issue in Leopaard CS10?

Confirm the fault condition and symptoms, conduct a visual inspection of the system to check for any brake fluid leaks or damaged wiring. Read the fault codes, which can be done directly with a decoder or by interpreting the warning light flashes according to the service manual to identify the fault. Based on the interpreted fault condition, use necessary tools and instruments to conduct an in-depth inspection of the suspected area to confirm the fault location and cause. Clear the fault codes; check if the warning light remains illuminated. If the warning light persists, it may indicate that there is still a fault present in the system.
3
4
Share

What is the transmission model of the Cayenne?

The Cayenne is equipped with ZF's second-generation 8AT transmission. Here are some details about the Cayenne: Exterior: The new Porsche Cayenne has minimal exterior differences compared to the previous model. The front fascia and overall silhouette still follow the Cayenne family's design language, resembling an oversized 911. It features a larger front grille and darkened headlights. The new Cayenne comes standard with LED headlights, with the option to upgrade to Porsche Dynamic Light System (PDLS), which offers various lighting modes for curves and road illumination. Powertrain: The new Cayenne offers two engine options: 3.0T and 4.0T.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.