Where is the fuse box in the 2018 A4?

1 Answers
DelLucille
07/29/25 4:40pm
The fuse box of the 2018 Audi A4 is located on the right side of the passenger seat. You can find it by opening the fuse box cover on the passenger side. The car fuse box is used to install car fuses. According to the classification of fuses, it can be divided into fuse tube boxes and fuse chip boxes. Based on the size of the fuses, it can be categorized into large fuse boxes, medium fuse boxes, and small fuse boxes. The 2018 Audi A4 has a body size of 4721mm in length, 1841mm in width, and 1495mm in height, with a wheelbase of 2805mm. The vehicle comes standard with Audi's patented quattro all-wheel-drive system, which provides double the traction. This system enables the vehicle to automatically, accurately, and timely distribute the ground force to each wheel when turning or braking on various complex road surfaces.
Was this review help?
18
0
Share
More Forum Discussions

What is the production period of the 12th generation Crown?

The production period of the 12th generation Crown is from 2005 to 2019. Introduction to Crown: Crown is a mid-to-large-sized car brand under the Toyota Group. The Toyota Crown was first launched in Japan on January 1, 1955, and has now exceeded the 13th generation. The domestic Crown models are equipped with 2.5L, 3.0L, and 4.3L engines. The first two are V6-cylinder 24-valve designs, while the 4.3L engine is a V8 configuration, featuring the Dual VVT-i (Variable Valve Timing-intelligent) system for both intake and exhaust valves. This significantly improves the engine's intake efficiency, fuel economy, and power performance, delivering stronger horsepower. In terms of the chassis, it adopts a four-wheel fully independent suspension, providing excellent comfort. Additional Information: The domestic new Crown comes in four models with seven grades, all equipped with a 3.0L dual VVT-i engine and a 6-speed automatic transmission. It uses the FR (front-engine, rear-wheel-drive) platform, combining smooth handling with ample driving force. FAW Toyota Crown officially ceased production at the end of 2019, with Toyota's new-generation Avalon replacing the Crown.
4
4
Share

What Transmission Does the Vision Use?

The Vision employs three types of transmissions, detailed as follows: 1. The Vision uses three transmissions: a 5-speed manual transmission, a CVT transmission, and a 4AT transmission. 2. The 4AT transmission is used in automatic models that meet the China V emission standard. 3. The CVT transmission is used in automatic models that meet the China VI emission standard. Below is some additional information about the Vision: 1. The Vision has dimensions of 4599mm in length, 1747mm in width, and 1482mm in height, with a wheelbase of 2615mm. 2. The front suspension of the Vision is a MacPherson independent suspension, and the rear suspension is a torsion beam semi-independent suspension. 3. The overall design of the Vision adopts Geely's family-style design, featuring the brand's signature water ripple grille, complemented by a blade-style engine hood and a shark-mouth lower grille. 4. The Vision is equipped with integrated high/low beam headlights, with the eyebrow lights and grille designed as a unified element. LED daytime running lights and side mirror light strips enhance safety. 5. The rear of the vehicle features multiple sharp lines for segmentation, with split tail lights connected horizontally by chrome trim, echoing the integrated spoiler and the chrome lower guard plate with a ripple pattern.
13
4
Share

Do I still need to go to the DMV every year for a vehicle with biennial inspection?

For vehicles with biennial inspection, you don't need to visit the DMV every year. Electronic annual inspection labels have now been implemented, eliminating the need to affix paper inspection labels on windshields. You only need to obtain an electronic inspection certificate through the traffic management 12123 platform. Below are specific details about vehicle annual inspections: Biennial application: Vehicles exempt from inspection for six years are exempt from on-site inspection, but require applying for an annual inspection compliance label every two years. To apply for the label, the owner or agent only needs to bring the required documents (vehicle license, ID card, and copy of compulsory traffic insurance) to the local DMV, or apply online. On-site processing: The owner or representative should bring documents such as ID card, motor vehicle inspection label application form, vehicle license, and copy of compulsory traffic insurance to the DMV for processing. If there are traffic violations, they need to be handled at the traffic violation processing window first.
7
0
Share

Is Shaking at 40 mph Caused by Half Shaft Damage?

Shaking at 40 mph could be caused by half shaft damage, but there are other potential factors as well. The specific reasons are as follows: Engine Misfire: An engine misfire mainly refers to one or more cylinders not functioning properly. Common symptoms include: intermittent exhaust airflow with noticeable pauses, severe shaking of the exhaust pipe, obvious engine vibration, and sometimes accompanied by sputtering sounds. This is often related to ignition coil failure. Engine Mount Deterioration: Engine mounts are rubber blocks between the engine and the frame. Their purpose is to reduce vibration and cushion the engine's operation while also securing the engine in place. Once these mounts deteriorate or become loose, engine vibration will become significantly more severe. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or faulty spark plug firing can also lead to such symptoms.
19
5
Share

How to Determine the Cylinder Order of the EA837 Engine?

ea837 engine cylinder order is determined from the front of the engine, where the first cylinder on the left is cylinder number one, and so on. Below are specific details about the EA837 engine: Introduction: The EA837 series engines include two displacements: 1.8L and 2.0L. The 1.8TSI has a maximum power output of 118kw, while the 2.0TSI can reach up to 147kw. Principle: The mechanical structures of these two engine displacements are fundamentally the same. The difference lies in the length of the connecting rods between the crankshaft and pistons. The 2.0TSI has shorter connecting rods compared to the 1.8TSI, with an increased crankshaft radius to enhance displacement. Additionally, the piston top structures differ slightly, primarily to adjust the working volume of the combustion chamber, ensuring consistent compression ratios and achieving the same combustion effects.
2
2
Share

Which province does the license plate 'Hei M' belong to?

Hei M is the license plate of Suihua City, Heilongjiang Province. The license plate codes for various regions in Heilongjiang are: Hei A - Harbin, Hei B - Qiqihar, Hei C - Mudanjiang, Hei D - Jiamusi, Hei E - Daqing, Hei F - Yichun, Hei G - Jixi, Hei H - Hegang, Hei J - Shuangyashan, Hei K - Qitaihe, Hei L - Songhuajiang, Hei M - Suihua, Hei N - Heihe, Hei P - Daxing'anling, Hei R - Heilongjiang. Suihua City is located in the central-southwest part of Heilongjiang Province. It is a prefecture-level city in Heilongjiang Province, an important transportation hub, and one of the six major passenger and freight transfer centers in the province. It is also a regional central city north of Harbin.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.