···
Log in / Register

Where is the fuel tank switch on the Reiz?

2 Answers
DiMadelyn
07/29/25 10:35am
The fuel tank switch of the Reiz is located on the floor near the driver's seat close to the door. Simply pull up the switch to open it. The Reiz has the following dimensions: length 4750mm, width 1795mm, height 1450mm, with a wheelbase of 2850mm, front and rear track of 1545mm, and a fuel tank capacity of 70 liters. The Reiz is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 142 kW at 6200 rpm and reaching its maximum torque at 4400 rpm. It is paired with a 6-speed automatic transmission. The front suspension is a double-wishbone type, while the rear suspension is a multi-link independent suspension.
Was this review help?
17
3
Share
OliviaLynn
08/13/25 3:03pm
As a seasoned driver with years of experience, I must say the fuel tank release lever in the Toyota Mark X (锐志) is located on the left-side door panel near the driver's seat, just slightly below knee level. A gentle pull on that small lever will pop open the fuel filler door. I remember spending some time locating it when I first bought my Mark X, but quickly got accustomed to this design. Most Toyota vehicles follow this layout - positioning it on the door panel allows easy left-hand operation while driving, combining safety with convenience. Some other vehicles place the release switch on the center console or near the floor, but the Mark X's design is very intuitive. Always remember to turn off the engine before refueling and double-check that the fuel door is properly open. The switch is made of durable material and rarely fails, but avoid excessive force when pulling. After a few drives, the location will become second nature - new drivers needn't worry about it.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What are the differences between the 2022 and 2021 Nissan Sylphy?

Here is an introduction to the differences between the 2020 and 2021 Nissan Sylphy: Different engines: The 2020 Sylphy 1.6L XE Manual Comfort Edition and 2020 Sylphy 1.6L XE CVT Comfort Edition are equipped with a 1.6L 139 horsepower L4 engine; while the 2021 Classic 1.6L XE Manual Comfort Edition and 2021 Classic 1.6L XE CVT Comfort Edition are equipped with a 1.6L 122 horsepower L4 engine. Different dimensions: The 2020 Sylphy 1.6L XE Manual Comfort Edition and 2020 Sylphy 1.6L XE CVT Comfort Edition have a body length, width, and height of 4641mm, 1815mm, and 1450mm, respectively; while the 2021 Classic 1.6L XE Manual Comfort Edition and 2021 Classic 1.6L XE CVT Comfort Edition have a body length, width, and height of 4631mm, 1760mm, and 1503mm, respectively.
6
5
Share

What are the functions of all the buttons in the MG5 interior?

MG5 interior function buttons include the front defrost/mist button, rear window heating button, air conditioning shortcut button, vehicle setup button, etc. Front defrost/mist button: Press the defrost/mist button, and the AC cooling switch will light up simultaneously. The system enters the defrost/mist function, used to remove mist or frost from the front windshield and front side windows. Rear window heating button: Press the rear window heating button, and the indicator light will illuminate, activating the rear window heating. The rear window heating will automatically turn off after working for 15 minutes. If activated a second time within 5 minutes, it will heat for 8 minutes before automatically turning off. While the rear window heating is active, pressing this button again will turn off the heating function, and the indicator light will go out. Air conditioning shortcut button: A short press will enter the air conditioning system interface on the central control display screen, where you can adjust the air conditioning functions. A long press can turn the air conditioning system on or off. Vehicle setup button: A short press will enter the vehicle setup interface on the central control display screen. Pressing it again will exit the interface.
1
2
Share

What grade of gasoline should Hyundai ix35 use?

Hyundai ix35 uses 92-octane gasoline. Introduction to engine oil: Engine oil grades: Grades include two parts: classification and viscosity specification. Engine oil grades usually indicate viscosity and quality. The viscosity of lubricating oil is mostly identified using SAE grade levels. Functions of engine oil: The functions of engine oil include lubricating pistons and cylinders, assisting in cooling and temperature reduction, sealing to prevent leaks, and preventing excessive wear of parts, which requires the establishment of an oil film between two sliding surfaces. A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby achieving the goal of reducing wear; when the engine is running, the engine oil can bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine. What really cools the engine is the water outside the engine casing; engine oil can form a sealing ring between the piston rings and the piston, reducing gas leakage and preventing external pollutants from entering. Precautions: When adding engine oil, the amount should be slightly lower than the standard scale. Too much engine oil will increase the rotational resistance of the crankshaft, reduce the output power of the engine, and excessive engine oil may enter the combustion chamber and participate in combustion, causing the vehicle to burn oil, emit blue smoke, and even increase fuel consumption.
17
1
Share

What was the final production year for the Golf 6?

The last batch of Golf 6 was produced in 2013, after which the Golf 7 series began production. Exterior design: The 6th generation Golf abandoned Volkswagen's signature "large U-shaped front grille", with its entire front fascia styling more closely resembling the Volkswagen Scirocco. Side profile: Similar to the domestically produced 4th generation Golf, the skillful use of character lines makes the side profile of the new model appear more slender. Model introduction: Like the 5th generation Golf which skipped the Chinese market, the 6th generation Golf was built on the PQ35 platform, sharing platform technology with current models like the Sagitar and Octavia. With body dimensions of 4199×1779×1479mm and a 2578mm wheelbase, it can only be considered a compact-class vehicle.
4
3
Share

Can the Little Monkey Electric Vehicle Be Licensed?

The Little Monkey electric vehicle cannot be licensed. Key components of the Little Monkey electric vehicle: The key components of an electric vehicle include the frame, motor, battery, and electronic control system. The electronic control system functions to regulate the entire vehicle's circuitry. The motor serves as the power source of the electric vehicle, responsible for driving it forward. The battery is the component that stores electrical energy. The battery of the Little Monkey electric vehicle: The battery requires regular replacement. During charging or discharging, ions in the battery move through the electrolyte, and some of these ions undergo chemical reactions with the electrolyte as they move. As the number of charge and discharge cycles increases, the quantity of ions in the battery gradually decreases, leading to a decline in battery performance.
5
2
Share

Is it necessary to use turn signals when reversing into a parking space in the new regulation for Subject 2?

When reversing into or out of a parking space in Subject 2, it is not necessary to use turn signals. There are a total of 6 instances in Subject 2 where turn signals are required, which are: When starting the vehicle, turn on the left turn signal; When starting on a slope, turn on the left turn signal; When parallel parking, turn on the right turn signal as the vehicle passes the parking space and stops 30 cm from the curb, preparing to reverse; Before shifting into reverse gear for parallel parking, turn on the left turn signal because during the reversing process, the steering wheel is turned fully to the right, causing the front of the vehicle to move left; Before exiting the parking space in parallel parking, shift into drive gear and turn on the left turn signal, turning it off promptly after exiting; When entering the area for a right-angle turn, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: Failing to use or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Turning the steering wheel within less than 3 seconds of activating the turn signal before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed under the following conditions: ① For applicants of large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a parking space, parallel parking, stopping and starting on a slope (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves), with five mandatory items (some regions include a sixth item, highway card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include stake tests, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, curve driving, right-angle turns, passing through a width-restricted gate, passing through continuous obstacles, driving on bumpy roads, making U-turns on narrow roads, as well as simulations of highways, continuous sharp mountain curves, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.