Where is the fuel tank switch of the Buick Excelle?

How to Solve the Problem of BMW 3 Series Headlights Staying On After Locking the Car?

If the headlights remain on after the car is turned off, you can check whether the headlights inside the car are not turned off. If the vehicle is equipped with automatic headlights, the headlights will turn off after a delay. However, if they stay on continuously after locking the car, you should check whether there is an issue with the circuit. It is recommended to visit a repair shop or a 4S store for inspection. Headlights that stay on for too long may eventually drain the battery, making it impossible to start the car next time. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only affect the owner's external image but are also closely related to safe driving at night or in bad weather conditions. Functions of car headlights: High and low beams: These are important indicators for driving at night. Position lights: Used to display the width and length of the vehicle at night. Fog lights: There are two types, front fog lights and rear fog lights. Front fog lights are installed at the front of the car, slightly lower than the headlights. Turn signals: Activated when the vehicle is turning, they flash intermittently to alert surrounding vehicles and pedestrians.

18

5

Share

How to Set Up One-Touch Power Window Control?

Setting up one-touch power window control is as follows: 1. Turn the ignition switch to the "ON" position. 2. If the driver's side window is closed, use the driver's side window switch to open it more than halfway. 3. Pull up and hold the driver's side window switch to close the driver's side window. After the window is fully closed, continue holding the switch for about 3 seconds, then release. 4. Check if the power window function is working properly, and the one-touch control setup is complete. Additional Information: One-touch power window refers to a system where the car window glass can be fully opened or closed with a single press of a button. Cars equipped with one-touch power windows have a two-stage window control switch. The first stage works like a regular power window switch. The second stage allows the window to automatically open or close completely with just a single press and release of the button. In contrast, regular power windows require the user to hold the switch until the window reaches the desired position, and the movement stops when the button is released.

12

2

Share

Precautions for Engine Installation

Precautions for engine installation are as follows: 1. Maintain a clean environment, preferably with a separate overhaul room; assembly is best performed by 1 to 2 people, with one person taking the lead to avoid forgetting installations or torque tightening due to too many people. 2. Piston installation direction: Generally, pistons have markings, such as small arrows pointing forward or dots on B-series engines. Do not analyze the valve grooves on the piston; the larger groove does not necessarily align with the intake valve. 3. Do not install valve springs upside down: Wuling uses unequal-pitch coil springs, which have a specific installation direction. Generally, the side with yellow markings faces upward. If the markings are unclear over time, remember to place the denser part of the spring downward. 4. Camshaft bearing cap bolts are prone to stripping: The camshaft caps on Wuling B-series engines are made of aluminum alloy and secured with two bolts. Repeated disassembly or excessive force can cause thread stripping. Pay attention here; the standard torque is 12 Nm. 5. Do not mix up bolt types: Be careful not to confuse bolts during installation, as some bolts may have similar lengths and sizes but different thread pitches. Specifically, do not mix up the No. 14 bolts for the Wuling B-series engine manifold with those for the flywheel plate, as their thread pitches differ.

3

1

Share

What Causes the Abnormal Noise When Turning on the Car Air Conditioner?

There are several reasons for abnormal noise when turning on the car air conditioner, including refrigerant expansion, compressor failure, foreign objects in the blower, etc. The car air conditioning system is used to regulate the temperature and humidity inside the vehicle, providing a comfortable environment for passengers. Reasons for abnormal noise when turning on the car air conditioner: Noise inside the control panel is usually caused by refrigerant expansion, and if the refrigerant contains water or air, simply replacing the refrigerant can solve the problem. Another reason is overcharging the refrigerant, which can also cause noise. Releasing some refrigerant appropriately can resolve the issue. Noise from the compressor typically indicates a compressor malfunction. There are many possible causes, such as worn-out compressor bearings or internal components needing replacement, insufficient tension in the tensioner pulley, or belt slippage, all of which can lead to noise. Noise from the blower can be caused by foreign objects inside the blower, lack of lubrication, or severe wear of the blower itself. The electromagnetic clutch, being close to the ground, is prone to accumulating dirt, which can cause bearing issues and result in noise. If the air filter has not been replaced for a long time, foreign objects may accumulate in the air ducts, leading to abnormal noise.

5

3

Share

How many kilometers for the first maintenance of Mercedes-Benz A180?

Mercedes-Benz A180's first maintenance is at 5000 kilometers. Basic parameters: Class: Compact car Engine: 100kW 1.3L, turbocharged Power type: Gasoline engine Transmission: 7-speed dual-clutch, Body structure: 4-door 5-seat sedan. Body parameters: Length (mm): 4622, Width (mm): 1796, Height (mm): 1454, Wheelbase (mm): 2789, Curb weight (kg): 1399, Front track (mm): 1567, Rear track (mm): 1547, Body structure: Sedan, Number of doors: 4, Number of seats: 5, Fuel tank capacity (L): 43.

11

0

Share

What are the maintenance items for the Vios at 40,000 kilometers?

The 40,000-kilometer maintenance for the Vios includes several items. Maintenance items: These include six items: engine oil, oil filter, air filter, cabin air filter, brake fluid, and transmission fluid. Additionally, the engine belt needs to be replaced. The drive shaft also requires lubrication. The maintenance covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more. Maintenance purpose: The purpose of maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.

8

4

Share

Where is the fuel tank switch of the Buick Excelle?

How to Solve the Problem of BMW 3 Series Headlights Staying On After Locking the Car?

How to Set Up One-Touch Power Window Control?

Precautions for Engine Installation

What Causes the Abnormal Noise When Turning on the Car Air Conditioner?

How many kilometers for the first maintenance of Mercedes-Benz A180?

What are the maintenance items for the Vios at 40,000 kilometers?

What is the transmission model of the Tharu 330?

What does it mean when the BMW X6 displays 4x4 and DSC faults?

How many airbags does the Geely Boyue have?

What Components Make Up an Electronically Controlled Fuel Injection System?