Where is the fuel tank switch of Borgward cars?

Which gear should be used when driving a manual transmission car downhill?

For a manual transmission car, it is necessary to shift into the appropriate gear before going downhill, typically second or third gear. The lower the gear, the stronger the car's power and the slower the speed. Here are some relevant details: 1. When going downhill, you can use engine braking. This requires continuously downshifting while descending, combined with the foot brake to gradually reduce speed. First, use the brake pedal to slow down, then downshift as the speed decreases slightly. Repeat this process—braking, downshifting, and braking again—until you reach the lowest gear, then use intermittent braking to complete the descent. 2. When using engine braking downhill, be cautious. If the car is moving at high speed and suddenly shifts into a lower gear, the engine will rev sharply. Since the speed cannot increase further when the engine reaches its maximum RPM, although there is some braking effect, it can cause significant wear on the engine. 3. If the vehicle is equipped with HDC (Hill Descent Control), simply activate the system (by pressing the button). In theory, the driver does not need to press the brake pedal, as the vehicle will automatically move at a low speed and apply braking force to wheels exceeding safe RPM, ensuring a smooth descent.

3

1

Share

How to Replace the Wiper Blade on a Window Cleaner?

Use a Phillips screwdriver to remove the two screws on the window cleaner, open the cover plate, insert the rubber blade, close the cover plate, and tighten the screws. Due to the different structures of double-sided window cleaners, the installation methods of rubber wiper blades also vary. There are roughly three types: 1. The rubber wiper blade is installed inside the plastic shell. This structure requires using a screwdriver to unscrew the screws, open the plastic shell, remove the old blade, and replace it with a new one. Some window cleaners have circular decorative covers over the screws, which need to be pried off first. When replacing the blade, be careful not to disturb the internal magnetic steel. 2. The rubber wiper blade is inserted from the side. This structure only requires pulling out the blade from the side of the window cleaner and inserting a new one, without disassembling the product. Ensure the blade is inserted properly. 3. The rubber wiper blade is inserted from the middle of the plastic shell. This is a new structure that requires first removing the blade fixing piece, pulling out the blade from the middle of the shell, inserting a new blade, and then installing the blade fixing piece. This also does not require disassembling the product.

3

2

Share

What problems will occur if the car throttle is broken?

Throttle failure can cause the following issues in a car: 1. Unstable engine idle speed, persistently high idle speed, and difficulty in starting the engine, especially during cold starts; 2. No engine idle speed; 3. Insufficient engine power, poor acceleration performance, and unstable operation; 4. Black smoke from the car's exhaust pipe and increased fuel consumption. Here is some relevant information: The throttle is a controllable valve that regulates air intake into the engine, available in two types: traditional cable-operated and electronic throttle. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to produce power. The throttle is connected to the air filter at the top and the engine block at the bottom, often referred to as the "throat" of the car engine.

18

2

Share

Can Water Be Added to Vehicle Coolant?

Water can be added to automotive coolant. Coolant, fully known as antifreeze coolant, is designed to prevent freezing and cooling functions, protecting the radiator from cracking and the engine cylinder block from freezing damage when the vehicle is parked in cold seasons. Antifreeze is not only for winter use but should be used year-round. In regular vehicle maintenance, the engine coolant should be replaced every year. Precautions for adding and using coolant are as follows: 1. Coolant must be added when the engine is in a cold state. 2. In emergencies, if suitable coolant is unavailable, pure water can be added, but avoid adding hard water such as well water or river water. 3. Whenever the cylinder head, cylinder gasket, or radiator is replaced, the coolant must also be replaced. 4. Before winter arrives, check the coolant concentration and adjust it according to specifications to ensure sufficient antifreeze capability. 5. Both coolant and additives are toxic substances; avoid direct contact with skin and store them in a safe place.

14

1

Share

Which country is Hankook Tire from?

Hankook Tire is a tire manufacturer from South Korea, established in 1941, and it is the first tire company in Korea. Here is some related information: 1. Many car brands use Hankook tires as their original equipment manufacturer (OEM) tires, and Hankook also sponsors some motorsport events. 2. Tires are very important for cars. Without a good set of tires, the car's handling cannot perform well. Tires are the only part of the car that comes into contact with the ground, so they are crucial for the car's driving stability and safety. 3. When using your car daily, regularly check the tire pressure. The tire pressure should not be too high or too low. If the pressure is too high, it will reduce the contact area between the tire and the ground, affecting the tire's grip. Poor grip can lead to worse handling of the car.

11

4

Share

Is smart a Geely car?

smart is not entirely a Geely car. Currently, smart is under the Daimler Group. However, in July 2020, Geely Automobile officially signed a cooperation agreement with Mercedes-Benz to establish a joint venture in China to produce Mercedes-Benz smart domestically. As a result, Geely is not only the largest shareholder of Mercedes-Benz but also a partner. Additional information: 1. The first domestically produced smart model is designed by Mercedes-Benz, with Geely responsible for production and development. The internal code is HX11, and the new car will be built on Geely's SEA vast architecture platform. It is expected that the changes in the exterior design will not be significant. The body length will be increased, potentially exceeding 4 meters, with a pure electric range of 500 kilometers. 2. smart is a microcar jointly manufactured by German Mercedes-Benz and Swiss SWATCH watch company, currently under the Daimler Group. The 'S' stands for Swatch, 'M' for Mercedes-Benz, and 'art' represents the perfect combination of Swatch and Mercedes as a work of art. The name 'smart' itself in English also means clever and intelligent, which aligns with the design philosophy of the smart company.

18

2

Share

Where is the fuel tank switch of Borgward cars?

Which gear should be used when driving a manual transmission car downhill?

How to Replace the Wiper Blade on a Window Cleaner?

What problems will occur if the car throttle is broken?

Can Water Be Added to Vehicle Coolant?

Which country is Hankook Tire from?

Is smart a Geely car?

What is the actual fuel consumption of the Verna 1.4 manual?

Can a 60-year-old get a driver's license?

What brand is Kapsen tires?

Why does the Passat's autohold not respond when pressed?