Where is the fuel tank switch located on the 14th-generation Sylphy?

What type of gasoline should be used for Audi A6L?

Audi A6L should use 95-octane gasoline. Gasoline is a volatile and flammable hydrocarbon mixture liquid derived from petroleum through distillation, cracking, or pyrolysis, and can be used as fuel. Different grades represent varying levels of fuel anti-knock performance, with higher octane numbers indicating better anti-knock properties. Taking the 2020 Audi A6L as an example, it features a front five-link independent suspension and a rear five-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190 PS, a maximum power of 140 kW, and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission.

12

4

Share

What does the ABS yellow light on the dashboard mean?

When the car displays the ABS light, it indicates a malfunction in the vehicle's Anti-lock Braking System. If the wheels lock up during emergency braking, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses significant safety risks. There are several conditions under which the ABS light may illuminate, each with different causes and solutions, as detailed below: Condition 1: ABS warning light stays on continuously (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal quality due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. Condition 2: ABS warning light intermittently illuminates, turning off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases, the voltage rises, and the ABS warning light turns off. This can also occur if the ABS system's power supply voltage is too low, such as due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or power contact issues). Condition 3: ABS warning light stays on after engine start, only turning off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, poor contact in the ABS hydraulic valve body wiring connector, or ABS computer malfunction. Solution: Loosen the grounding screw on the hydraulic valve body, then retighten it, cleaning the contact surface if necessary. Check if the connector gap has widened. Replace the ABS or ABS/ASR computer if needed. Condition 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear wheel speed and front wheel speed signals. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. Condition 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and use a finger to push the brake switch linkage all the way down. Then release the brake pedal to complete the self-setting process. Replace the brake light switch if necessary.

15

3

Share

What is the emission standard of Honda XRV?

Honda XRV has models that meet both China 5 and China 6 emission standards. The methods to check the emission standard are: 1. Check the vehicle conformity certificate, which comes with the car upon delivery and clearly states the emission standard; 2. Look for the vehicle information sheet, where you can find the emission standard in the vehicle information section; 3. Check the conformity certificate, which includes exhaust emissions and indicates the corresponding emission standard; 4. Visit the official vehicle environmental protection website, find the public query platform at the bottom of the homepage, enter the vehicle VIN code and the last 6 digits of the engine number to check; 5. Inspect the vehicle's environmental protection label, which is clearly marked on the back of the environmental protection label affixed to the front windshield, indicating the vehicle's emission standard.

14

4

Share

What does the 'V' on car tires mean?

The 'V' on car tires refers to the speed rating of the tire. The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions, with 'V' representing a peak speed of 240 km/h. Tires, in direct contact with the road surface and working in conjunction with the vehicle's suspension, help to cushion the impacts encountered during driving. They ensure good ride comfort and smooth driving, maintain excellent adhesion between the wheels and the road surface, and enhance the vehicle's traction, braking, and maneuverability. Functions of tires: 1. Transmit driving force, braking force, and steering force to enable vehicle operation; 2. Support the vehicle's load; 3. Reduce and absorb vibrations and impacts during driving.

2

5

Share

How to open the fuel tank cap of Changan Eado?

The method to open the fuel tank cap of Changan Eado is: 1. Pull the fuel tank switch lever located below the left side of the driver's seat; 2. Use the matching key to open it. The fuel tank consists of a fuel tank cap, partition plate, fuel gauge sensor, fuel inlet and return pipes, fuel filler neck, and vent. Taking the 2020 Changan Eado as an example, it is a compact car with body dimensions of: length 4730mm, width 1820mm, height 1505mm, and rear track width of 1566mm. The 2020 Changan Eado is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 158PS, maximum torque of 260Nm, and maximum power of 116kW.

15

4

Share

How to Remove Chewing Gum from a Car?

The solutions for removing chewing gum from a car are: 1. White vinegar: Pour a small amount of white vinegar on the chewing gum to soften it, then use cotton or a towel dipped in white vinegar to repeatedly scrub until clean; 2. Alcohol: Dilute alcohol or high-proof liquor with hot water, spray it on the gum residue, and wipe with a towel; 3. Essential balm: Drop a few drops of essential balm on the chewing gum to soften it, then scrub with a water-dipped towel; 4. Egg white: Apply egg white to the gum to loosen it, then wipe it off one by one, followed by cleaning with a soapy water towel; 5. Tar remover: Purchase and use a tar remover, spray it on the chewing gum, wait for it to soften, and then wipe it off with a towel.

10

2

Share

Where is the fuel tank switch located on the 14th-generation Sylphy?

What type of gasoline should be used for Audi A6L?

What does the ABS yellow light on the dashboard mean?

What is the emission standard of Honda XRV?

What does the 'V' on car tires mean?

How to open the fuel tank cap of Changan Eado?

How to Remove Chewing Gum from a Car?

Why does a car suddenly stall while driving?

What is the tire specification for the Corolla?

What is the ECU in a car?

How to use the cruise control on Audi A4L?