Where is the fuel tank switch located in Volkswagen cars?

1 Answers
MariaLynn
07/29/25 9:36pm
Volkswagen fuel tank switch is located on the left side below the steering wheel on the dashboard. From left to right, the first handle is the trunk control button, and the second handle is the fuel tank cover control button. Here are some precautions regarding the car fuel tank: 1. The suction pipe and return pipe should be inserted below the minimum liquid level to prevent air suction and oil splash from generating bubbles. 2. The distance between the suction pipe and return pipe should be as far as possible, and a partition should be set between them. 3. To maintain oil cleanliness, the fuel tank should have a sealed cover plate with an air filter installed on it. 4. The bottom of the fuel tank should be at least 150mm above the ground, and sufficient attention should be paid to the anti-corrosion treatment of the inner surface of the fuel tank.
Was this review help?
8
4
Share
More Forum Discussions

What is the tire size of the Volkswagen Bora?

The tire model for the Volkswagen Bora is 205/55R16. Below is an introduction to the tires: 1. Tire specifications: Tire specifications are often represented by a set of numbers, where the first number indicates the tire section width, and the latter represents the rim diameter in inches. For example, 205/55R16 means a tire width of 205 millimeters, an aspect ratio of 55, and a rim diameter of 16 inches for a radial tire. 2. Tire width: The width of the tire is usually measured in millimeters. The wider the tire, the larger the contact area. Under the premise of the same tread pattern and material, a wider tire will have better grip and traction in straight-line driving conditions, but the fuel consumption level will increase accordingly. Therefore, when we replace or upgrade tire specifications in daily life, we also need to weigh the pros and cons.
5
5
Share

What Volkswagen cars are available for around 100,000 yuan?

Volkswagen cars available for around 100,000 yuan include Lavida, Bora, the new Santana, Jetta, Polo, Lamando, Sagitar, and Golf. The following is an expansion on Volkswagen cars: 1. Company Introduction: Volkswagen is an automobile manufacturing company headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's four largest automobile manufacturers. 2. Well-known brands under Volkswagen: (1) Audi's main models include (domestic: A4L, A6L. Imported: A3, A5, A8, Q7, TT, R8, etc.). (2) Bugatti was originally an Italian brand, produced in France, with main models including (Veyron, Chiron). (3) Škoda was originally a Czech brand, with some of its models now produced domestically by Shanghai Volkswagen, including (Superb, Fabia, Octavia).
6
4
Share

What are the reasons for a three-cylinder plunger pump having no pressure?

Below are the reasons why a three-cylinder plunger pump has no pressure: Aging of the car wash pump itself: Generally, booster pumps are plunger pumps, and the rubber rings inside may age, requiring replacement with new ones. Pipe blockage: The pump's inlet or outlet pipe may be blocked by scale or dirt, leading to insufficient pressure. Trying a new section of pipe might help. Below are the reasons for severe shaking in a three-cylinder engine: Dirty air filter: The air filter is designed to protect the engine and reduce wear, typically needing replacement around 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine shaking. Spark plug lifespan: Spark plugs have a limited lifespan, and their ignition efficiency significantly decreases after 30,000 to 40,000 kilometers, which can affect ignition. Low idle speed: The engine's idle speed is preset in the computer. When the speed drops below a certain range, the car's computer will automatically adjust it. Abnormal water temperature: The engine operates within a normal temperature range. High water temperature can cause early ignition timing, changes in the air-fuel mixture, thinning of engine oil viscosity, and reduced lubrication performance. Common causes of shaking include lack of antifreeze, a stuck thermostat, a non-functioning fan, or inaccurate temperature control switch settings. Clogged fuel injectors: In fuel-injected cars, the injectors are key components for fuel delivery and have a long lifespan, potentially lasting hundreds of thousands of kilometers. However, gum deposits in gasoline can clog the injector nozzles, causing inconsistent fuel delivery among injectors and uneven cylinder operation, leading to engine shaking.
17
1
Share

What does AUX mean in Chinese?

AUX (Auxiliary) refers to an audio input interface. It can output audio from electronic audio devices including MP3 players (the interface is typically a standard 3.5mm headphone jack), with the purpose of connecting to a car audio system to play music from these devices. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio from electronic products can be connected to the car audio through the headphone jack and AUX interface, allowing the audio to be played through the car audio broadcasting system. Aux is the abbreviation for Auxiliary, which is an additional signal line design. In general audio equipment, besides the official output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. When there are special applications, such as requiring additional audio output or input, these terminals can be utilized. These backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, and can also be connected to a MODEM via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because their respective applicable configuration environments differ. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are typically impossible in user mode, such as initialization, restoring default configurations, and correcting abnormal user modes. It provides a fixed port for the device, which can be used as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup functions for hardware products can be achieved. Note: When using the AUX interface, ensure you purchase the correct connecting cable and be careful not to plug the audio cable into the wrong port. It is best to follow the steps in the product's user manual when using the AUX interface. If you are still unsure, you can consult the product's official website or call for assistance.
3
2
Share

What is the actual measured fuel consumption of the BYD Song Pro fuel version?

BYD Song Pro fuel version's actual measured fuel consumption is 8~9 liters per 100 kilometers. Here is some introduction about the actual measured fuel consumption of BYD Song Pro fuel version: 1. Fuel consumption: The real average fuel consumption of the Pro fuel version is about 8~9 liters per 100 kilometers. BYD Song Pro is a "global quality large five-seat SUV" under BYD, which won the Best Debut New Car Award at the 2019 Shanghai Auto Show Organizing Committee. 2. Power: The Pro fuel version adopts a 1.5TI engine + 6-speed automatic transmission, meeting the China VI B emission standard. The newly optimized wet dual-clutch transmission makes the power connection smoother.
7
4
Share

What type of engine oil is recommended for the Lynk & Co 01?

The official manual for the Lynk & Co 01 recommends engine oil with a viscosity grade of 0W-20. Any oil that meets this specification can be used. The original factory oil brand for the Lynk & Co 01 is Shell. For later maintenance and oil changes, you can choose brands such as Shell, Mobil, Castrol, or Total. Engine oil viscosity changes with temperature, so it's important to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The steps for changing the engine oil in a Lynk & Co 01 are as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover filler port, typically filling about three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.