Where is the fuel tank opened on the 10th generation Accord?

1 Answers
PaisleeLynn
07/29/25 11:20am
The fuel tank of the 10th generation Accord is located on the rear fender on the driver's side. There is no fuel tank lock button inside the car. When the vehicle is unlocked, pressing the fuel tank cover will automatically pop it open. After locking the car, the fuel tank cover will automatically lock. Content extension: 1. Try not to wait until the fuel light comes on before refueling. Because the fuel pump is located inside the fuel tank, it generates high temperatures during continuous operation, and being immersed in fuel helps to effectively cool it down. 2. Some models have specific requirements for fuel quality. Using gasoline with a lower octane rating than specified may cause engine knocking, while blindly using gasoline with a higher octane rating than required is also incorrect.
Was this review help?
9
5
Share
More Forum Discussions

How many kilometers can you drive after the fuel gauge shows 0?

When the fuel gauge shows "0", you can usually drive about 20 kilometers more, but this depends on factors such as the driver's skill, road conditions, weather, and the car's fuel consumption. However, since each driver's skill and road conditions vary, the exact distance you can drive will also differ. Here is some relevant information about gasoline: 1. Introduction: Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through distillation and cracking, used as fuel. It appears as a transparent liquid, is flammable, and has a distillation range of 30°C to 220°C. 2. Important characteristics: The key characteristics of gasoline include volatility, stability, anti-knock properties, corrosiveness, and cleanliness.
8
2
Share

Is It Illegal to Add a Spoiler to a Car?

Adding a spoiler to a car is illegal. Here are some specific regulations: 1. Motor Vehicle Registration Regulations: According to Article 57 of the 'Motor Vehicle Registration Regulations,' except for the circumstances specified in Articles 10 and 16, any unauthorized alteration of the vehicle's appearance or registered technical data will result in the traffic management department of the public security authorities ordering the restoration of the original condition and imposing a warning or a fine of up to 500 yuan. 2. Other Regulations: Article 16 states that under the following circumstances, the owner of the motor vehicle does not need to apply for a change of registration, provided that safety and license plate recognition are not affected: (1) Installation of front and rear anti-collision devices on small and mini passenger vehicles; (2) Installation of windshields, water tanks, toolboxes, spare tire racks, etc., on cargo motor vehicles; (3) Addition of interior decorations to motor vehicles.
17
4
Share

Can a Small Spoiler Pass the Annual Inspection?

Adding a spoiler to a car will not pass the annual inspection. During the annual inspection, the vehicle will be checked to see if it has been modified, altered, or reconstructed. The inspection also verifies whether the vehicle's registration, license plate, and records match the actual condition of the car and if any changes have been made without proper approval and modification procedures. Unless the vehicle modifications, alterations, or technical transformations have not undergone the necessary approval and modification procedures. Relevant information about the annual vehicle inspection is as follows: 1. Introduction: The annual vehicle inspection is a mandatory test for every vehicle that has obtained an official license plate and registration certificate. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." 2. Purpose: The annual vehicle inspection helps to promptly eliminate potential safety hazards, encourages better maintenance of the vehicle, and reduces the occurrence of traffic accidents.
4
4
Share

Where to Check the Vehicle Inspection Time?

Vehicle inspection time can be found on the duplicate of the vehicle license. Here is an introduction to the vehicle inspection time: 1. Validity period: The "Inspection Valid Until **Year**Month" on the duplicate of the vehicle license indicates that the annual inspection date is three months before the expiration of the validity period (including the current month). The vehicle annual inspection date is calculated by month, and it is not considered overdue if the inspection is conducted in the last full month of the validity period. 2. Consequences of overdue: Vehicles that have not passed the annual inspection on time are not allowed on the road. Driving such a vehicle is considered illegal, and the vehicle may be impounded. Moreover, if an overdue vehicle is found on the road, the traffic police department will impose corresponding penalties based on the overdue period. For overdue periods within one year, 3 points will be deducted and a fine of 200 yuan will be imposed. Overdue periods exceeding one year will face more severe penalties.
12
3
Share

Can Blue Plate Trucks Enter Urban Areas?

Regulations for blue plate trucks entering urban areas vary by city. There is no nationwide unified regulation, as each city formulates its own traffic restriction measures. Here are additional details about blue plate trucks entering urban areas: 1. Different city regulations: In some cities, local blue plate trucks require a permit, while out-of-town blue plate trucks are not allowed to enter the urban area; in some cities, local blue plate trucks can enter the urban area freely, while out-of-town blue plate trucks are prohibited; in some cities, there are no traffic restrictions on blue plate trucks. 2. Driving conditions for blue plate trucks: The requirements for driving a blue plate light truck are not high, and drivers with a C1 license can operate them. Therefore, a freight qualification certificate is no longer required to drive a blue plate light truck.
15
4
Share

How to Adjust the Ignition Timing Advance Angle of a Car?

Changing the ignition timing advance angle of a car involves using mechanical centrifugal and vacuum adjustment devices. Below is an introduction to the methods for adjusting the ignition angle: 1. Centrifugal Ignition Advance Adjustment Device: When the engine speed changes, it automatically alters the phase relationship between the breaker cam and the distributor shaft, thereby adjusting the ignition timing advance angle. As the speed increases, the centrifugal force acting on the weights overcomes the spring force, causing them to move outward. Through linkage mechanisms, the cam is advanced by an angle on the shaft to increase the ignition timing advance angle. This device is effective when the crankshaft speed ranges from 400 to 1500 rpm. 2. Vacuum Ignition Advance Adjustment Device: It automatically adjusts the ignition timing advance angle when the engine load, i.e., the throttle opening, changes. Changes in throttle opening affect the surrounding vacuum level, which in turn, through the vacuum chamber and its linkage, causes the distributor housing, fixed plate, and contacts to retreat relative to the cam by an angle, thereby increasing the ignition timing advance angle. This device does not function when the throttle is fully open or nearly closed.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.