···
Log in / Register

Where is the fuel tank cover switch for the BYD Song Plus?

6Answers
VanLilah
08/30/2025, 04:02:24 AM

The fuel tank cover switch for the BYD Song Plus is located at the lower left side of the driver's compartment. Here are some related details about the BYD Song Plus: 1. Configuration: The new car is equipped with a panoramic sunroof, multi-layer soundproof glass, electrically adjustable and foldable heated rearview mirrors, dual-zone automatic air conditioning, an onboard PM2.5 filtration device, electrically adjustable front seats, and rear seats that can be folded down in a split ratio. 2. Powertrain: The new car is powered by a 1.5L inline 4-cylinder turbocharged naturally aspirated engine with a maximum power output of 81kW and a maximum torque of 135N·m. It is paired with an E-CVT continuously variable transmission and comes with a 145kW permanent magnet synchronous motor, offering a pure electric range of up to 110km.

Was this review help?
107
Share
Janet
09/12/2025, 12:57:05 AM

I've been driving the BYD Song Plus for almost two years now. The fuel tank cover switch is located above the floor on the left side of the driver's seat - just look down and you'll see a small plastic button. Remember to unlock the vehicle first before pressing this switch. When you press it, you'll hear a click sound and the fuel tank cover will pop open. For older models with physical keys, you need to turn the key to unlock first; newer models can be unlocked directly via the door handle. Always remember to turn off the engine before refueling, otherwise the fuel tank cover might not open. The fuel filler is on the left side of the car, and there's a small arrow on the dashboard indicating this. It's completely normal if you can't find it the first time - you'll get used to it after a few tries. One important thing to note: if the car isn't unlocked, pressing the button won't do anything no matter how hard you try.

Was this review help?
2
Share
Expand All
Roy
10/26/2025, 01:45:23 AM

The fuel tank cap design of this car is very user-friendly, requiring no key at all. When you sit in the driver's seat, look down to the lower left side. There's a button with a fuel tank symbol between the door and the seat - just press it conveniently. Remember to unlock the entire vehicle before refueling. Some owners mistakenly think simply opening the door is enough, but you actually need to press the unlock button on the remote key. Hybrid versions have an additional detail: the central control screen allows you to set an automatic locking function for the fuel tank cap to prevent accidental operation. I recommend practicing locating this switch several times when you first get the car to avoid confusion at gas stations. Once, my friend couldn't find the switch when refueling and ended up crawling around searching - quite embarrassing. Developing a habit of checking tire pressure before refueling would make the routine more thorough.

Was this review help?
16
Share
Expand All
EvanLynn
12/09/2025, 01:05:14 AM

When I first picked up the car, I spent a long time looking for the fuel tank cap switch at the gas station. Later, the salesperson told me it's located on the wall above where you place your left foot. Just reach down with your fingers to feel the textured button, press it, and the fuel tank cap will pop open. A reminder: The charging port is nearby, so don't mix them up. The clever design of the Song Plus is that it requires the whole vehicle to be unlocked, preventing accidental presses while driving. For DM-i models, you can find the fuel tank cap icon on the central control screen to unlock it, so there's no need to bend down. When refueling, pay attention to the small arrow on the dashboard, which shows which side the fuel tank opening is on. After each refueling, make sure to press the fuel tank cap firmly until you hear a click, indicating it's properly locked.

Was this review help?
4
Share
Expand All
BeauMarie
01/29/2026, 02:16:23 AM

Pro tips for locating it: On the interior trim panel directly below the ignition switch, approximately 15 cm above the carpet, there's a black button with a fuel tank symbol. Key point: the vehicle must be unlocked for it to work. Hybrid owners note: When battery charge is sufficient, the system prioritizes electric mode, automatically locking the fuel filler cap - you'll need to manually unlock it via the central display. When refueling, it's recommended to turn off the auto start-stop function to prevent unexpected engine activation. I often see people driving off without properly closing the fuel cap, which triggers a yellow warning light on the dashboard. During heavy rain, remember to dry the switch before pressing to prevent short circuits. This car's fuel filler cap also features an anti-theft latch, which is quite practical.

Was this review help?
12
Share
Expand All
LeMarley
04/24/2026, 01:42:53 PM

Three steps to locate the fuel filler cap release: Sit in the driver's seat, shift your left foot leftward until your knee touches the door panel, then feel downward for a coin-sized button. First press the car key's unlock button, then press that button to open. Before refueling, it's advisable to activate hazard lights to warn following vehicles, especially at night. There's also an emergency pull ring below the left side of the steering wheel for manual opening if the electronic switch fails. Gas stations often see new car owners circling their vehicles searching – actually, the release is within the driver's reach without exiting. After refueling, ensure the cap is tightly closed; the dashboard has an unsecured cap warning feature. Remember: Always turn off the engine before refueling – safety first.

Was this review help?
4
Share
Expand All
More Q&A

Will Vehicle Modifications Affect Accident Liability Determination?

Whether vehicle modifications will affect accident liability determination depends on the specific circumstances. If the modifications are done in compliance with the law, they will not affect liability determination. However, if the modifications are the main cause of the accident, they will influence the liability determination. According to relevant regulations on vehicle modifications: Vehicle emblems are strictly prohibited from being altered, and self-modified emblems will not pass annual inspections. The color of the vehicle can be changed, but it must be registered with the vehicle management office. However, the emblem cannot be altered arbitrarily. Modifications from a large emblem to a standing emblem will not be accepted for registration, and such modifications are not recommended. Modified vehicles passing annual inspections: If the vehicle left the factory with a large emblem, it must be registered as such; otherwise, it will not be registered. Currently, traffic police departments have strict requirements regarding the appearance of vehicles during annual inspections. Vehicles with modifications that do not match the details on the vehicle registration certificate will not pass the annual inspection.
108
Share

Will cutting the brake power-off wire have any impact?

There will be an impact. The specific introduction is as follows: After the brake power-off wire is cut, the vehicle will lose the brake power-off function. When braking, the rear brake lights will not illuminate, posing a threat to driving safety. When the brake power-off function is triggered, the controller stops working. Power-off does not mean the vehicle loses power, but rather that the controller stops outputting. Extended information: 1. Power-off switch: The brake power-off switch has two wires. Connect the green wire of the power-off switch on the brake handle to the dashboard, with the positive terminal for the power indicator. Locate the plug with the black wire in the same group, use a multimeter to measure its voltage value below 12V. With the electric vehicle powered on and the throttle gently twisted to make the motor rotate slowly, use a thin wire to manually short-circuit the two wires of this plug. If the motor stops, it is the brake power-off wire. 2. The purpose of braking is to decelerate: The purpose of braking is to decelerate, which can reduce speed or bring the vehicle to a stop. The principle of braking is to convert the kinetic energy of the vehicle into heat energy for dissipation. The kinetic energy comes from the power provided by the engine, which requires fuel combustion to perform work. Try to use the brakes as little as possible when driving. Braking is only a method adopted for comfort or in emergency situations when necessary.
109
Share

Will the inspection date be advanced if the vehicle inspection is done in advance?

Advancing the annual vehicle inspection will not affect the next inspection date. Please check the expiration month/year printed on the duplicate of the vehicle license and complete the procedure within three months in advance. The vehicle can be inspected during the last two months before the expiration date or on the last day of the expiration month, neither of which counts as overdue. It's best to conduct the annual inspection two months or slightly more than one month in advance, avoiding the last few days. Generally, inspection stations have relatively fewer appointments before the 10th of each month, while the latter half of the month tends to be busier. The regulation "annual inspection should be completed within 90 days before the expiration date" is designed to help vehicle owners arrange their time conveniently. If you're concerned about losing out by inspecting early, you can actually wait until the last day of the expiration date to conduct the inspection. Vehicle inspections consider only the month, not the specific day. For example, if the inspection date is May 11, 2020, the vehicle can be inspected at the local inspection station anytime between March 1 and May 31 during working hours, meaning it can be postponed until the end of the month. Before the annual inspection, make sure to prepare the vehicle license and the compulsory traffic accident liability insurance policy. Small passenger vehicles with 7 seats or fewer are exempt from inspection for the first 6 years, but you must renew the inspection decal at the local vehicle management office every two years based on the registration date on the vehicle license. Otherwise, penalties for uninspected vehicles will apply. If the inspection exceeds the valid period, it will be considered overdue, resulting in a penalty of 3 demerit points and a fine of 200 yuan. Be sure to settle any traffic violations before the annual inspection. New vehicles must undergo an on-site inspection in the sixth year; the 6-year exemption does not include the sixth year.
103
Share

Can I still file an insurance claim if I didn't report the accident immediately?

If you didn't report the car accident to the insurance company at the time of the incident and report it more than 48 hours later, the insurance company has the right to refuse compensation. Basic introduction to insurance claims: Article 223 of the Insurance Law stipulates that after the occurrence of an insured event, when requesting the insurer to compensate or pay insurance benefits in accordance with the insurance contract, the policyholder, the insured, or the beneficiary shall provide the insurer with all relevant proofs and materials they can provide to confirm the nature, cause, and extent of the loss of the insured event. Claim methods: There are two ways for insurance companies to settle claims with policyholders based on the insurance contract after an insured event occurs: indemnity and payment. Indemnity corresponds to property insurance, which means the insurance company compensates the insured for the loss based on the extent of damage to the insured property at the time of the incident, within the insurance amount. Insurance compensation is compensatory in nature, meaning it only compensates for the actual loss, at most equivalent to the value of the damaged property, and never more than its value.
103
Share

What is the P0134 trouble code?

P0134 is a trouble code indicating no signal from the upstream oxygen sensor. Here are the related details: Causes of P0134: Open circuit in the sensor signal line; excessive resistance; sensor poisoning failure or damage. Troubleshooting approach for P0134: Poor contact, short circuit due to worn insulation on the wires, or broken wires inside the insulation can all cause intermittent faults; moving or shaking the related wiring harness or connectors while observing the diagnostic tool or sensor signal can help identify the location of intermittent faults, as the diagnostic tool will display corresponding changes when the fault occurs.
107
Share

Will Installing a Push-Button Start Affect the Car?

Properly installing a push-button start will not affect the car. Below is relevant information about push-button start: Methods for installing push-button start: There are two methods: aftermarket modification and OEM modification. Aftermarket modification is cheaper; OEM installation offers higher compatibility and comes with manufacturer warranty, making it more hassle-free in the long run. Advantages of installing push-button start: Automatically closes windows without restarting the vehicle, significantly improving the car's security level; the biggest benefit is the convenience, eliminating the hassle of taking out or searching for keys; the vehicle's anti-theft system locks the circuit, fuel system, and ignition, making it impossible to start the car even if the anti-theft device is illegally removed.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.