Where is the fuel tank cap switch on the GL8?

2 Answers
McArcher
07/24/25 5:04pm
The fuel tank cap switch of the GL8 is located under the driver's seat in the main cockpit. Pull it outward by hand to open the fuel tank cap. For the new GL8 model, the fuel tank switch is inside the fuel tank cap. You can press the fuel tank cap gently to open it. Maintenance tips for the car fuel tank: 1. The fuel tank provides waterproofing and insulation. If the car idles for a long time, the fuel system should be cleaned or the filter replaced when reaching 30,000 kilometers. Otherwise, the fuel tank pressure may become too high, causing the car to shake while driving. 2. In summer, when temperatures are high, fuel and water evaporate quickly. Make sure to tighten the fuel tank cap properly. Besides preventing fuel leaks from the fuel line, regularly check the water level in the radiator, the oil level and height in the crankcase, the brake fluid level in the master cylinder, and the electrolyte density and level in the battery. If any of these levels fall below the normal range, remember to add or adjust them promptly.
Was this review help?
2
3
Share
EmersonLynn
08/11/25 9:27am
I've been driving the GL8 for over five years and found the fuel filler door switch is actually quite simple to locate. It's discreetly positioned on the inner panel of the driver's side door – just pull open the door, and you'll spot a dedicated button or lever near the handle. Operation is intuitive: after parking and turning off the engine, press it to pop open the fuel door, then gently close it after refueling. I recommend keeping this area clean to prevent dust buildup that might jam the mechanism. If you can't find it, door panel clutter might be obstructing it; a quick tidy-up should help. Safety-wise, remember to turn off the engine and mobile phones while refueling – it's basic common sense. Fellow owners have shared that older GL8 models have similar switch designs, though some newer variants may incorporate smart sensor features, so consulting the manual is advisable. Once you get used to it, operation becomes second nature – no need to worry about locating it.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

What is the function of the front windshield film?

The functions of front windshield film include: 1. Sun protection and UV protection: The front windshield has a large heat-receiving area and is exposed to more ultraviolet radiation. The film can effectively block UV rays, ensuring the health of the driver and passengers; 2. Heat insulation: The film can block a portion of the heat; 3. Anti-glare: During the day, the bright sunlight can cause glare, and at night, the strong lights from oncoming vehicles can also produce dazzling glare, especially when driving on rainy nights when the lights are more chaotic. The front windshield film can effectively reduce this glaring light; 4. Anti-explosion function: Since the front windshield is made of tempered safety glass, if the glass shatters, the installed front film prevents the fragments from flying, thereby protecting the safety of the driver.
13
1
Share

What is the fuel tank capacity of the Roewe RX3?

The fuel tank capacity of the Roewe RX3 is 48 liters, which is the safe capacity marked in the user manual. The safe capacity refers to the volume from the bottom of the fuel tank to the safety limit line. In fact, there is still a certain distance from the safety limit line to the fuel tank opening. The manufacturer has set a safety limit line for car owners, suggesting not to exceed the marked capacity when refueling. The Roewe RX3 is a model under SAIC Roewe, with body dimensions of 4408mm in length, 1804mm in width, and 1651mm in height, and a wheelbase of 2625mm. In terms of exterior design, the Roewe RX3 continues the family-style design elements of Roewe, with an overall style very similar to the Roewe RX5 model. It features an inverted trapezoidal chrome grille paired with eagle-eye-style front headlights, and the taillights use LED light sources.
10
0
Share

Where is the ambient light switch for the Mercedes-Benz C200L?

The ambient light switch for Mercedes-Benz vehicles is generally located on the overhead sunroof switch, or you can directly use the directional keys on the steering wheel to select the dashboard settings interface, choose the lighting settings, and then find the ambient light option to turn it on or off. Below is more information about ambient lights: 1. Concept: Ambient lights are decorative lighting fixtures, typically available in colors such as red, blue, yellow, and green. 2. Function: Ambient lights can make the interior of the car more dazzling at night, creating a lively atmosphere. 3. Adjustment: Different ambient light colors can be selected and adjusted on the central control screen, and the ambient lights will change according to the color settings on the central control screen. When using ambient lights, it is essential to adjust the brightness properly, as negligence may lead to safety hazards.
2
3
Share

What is the relationship between RPM and gear?

RPM and gear have a matching relationship. The following is an introduction to RPM: 1. Introduction: Rotational Speed (Rotational-Speed or Rev) refers to the number of revolutions a rotating object makes around a central point per unit time (different from frequency). Common RPM types include rated speed and maximum speed. 2. Structure: Hard drive speed is expressed in revolutions per minute, with the unit denoted as RPM, which stands for Revolutions Per minute. A higher RPM value indicates faster internal transfer rates, shorter access times, and better overall hard drive performance. 3. Function: The spindle motor of a hard drive spins the disk at high speed, generating buoyancy that allows the read/write head to float above the disk. The faster the rotation speed, the shorter the waiting time to bring the target data sector under the head. Therefore, RPM largely determines the speed of a hard drive.
4
1
Share

Why does the ETC in the car beep?

ETC uses radio frequency for identification. It might beep due to interference from similar signals emitted by places like bus stations. If the ETC device keeps beeping continuously, it indicates an abnormality in the device, and it's best to have an ETC technician inspect it. Below are detailed explanations: 1. ETC: The ETC system communicates wirelessly between the onboard unit installed in the vehicle and the antenna on the toll station lane, exchanging information. It mainly consists of an automatic vehicle identification system, a central management system, and other auxiliary facilities. The automatic vehicle identification system includes the onboard unit (also known as a transponder or electronic tag), roadside unit (RSU), loop sensors, etc. 2. Usage Notes: To ensure more accurate path identification information, users should promptly return the toll card to the electronic tag after swiping it in the manual toll lane.
12
3
Share

What does Audi A6L 50TFSI mean?

The meaning of Audi A6L 50TFSI: 50TFSI represents the g-value, T stands for turbocharging (Audi also uses T to represent supercharging in its vehicle lineup). 50TFSI refers to a 3.0L V6 supercharged direct injection engine with a maximum power output of 220kW. The Audi A6L is a model under FAW-Volkswagen Audi, with body dimensions of 5036mm in length, 1874mm in width, 1466mm in height, and a wheelbase of 3012mm. In terms of exterior design, the Audi A6L's front face inherits the classic family characteristics, presenting a solemn and intelligent image. The hexagonal single-frame grille features horizontally arranged chrome trim strips, combined with the designer's headlight design, creating a wide and flat visual effect for the front face.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.