Where is the fuel tank cap switch located on the MG ZS?

2 Answers
DelRiley
07/29/25 3:32am
The fuel tank cap switch of the MG ZS is located below the left side of the driver's seat. The in-car fuel tank cap switch is opened by pulling it by hand. Once pulled, the fuel tank cap will automatically pop open. Many cars share the same fuel tank cap opening method - pulling the switch with a fuel tank symbol below the left side of the driver's seat, then pressing the fuel tank cap by hand from outside the vehicle to open it. The MG ZS is the first internet-connected SUV model under the MG brand. This vehicle measures 4313mm in length, 1809mm in width, 1648mm in height, with a wheelbase of 2580mm.
Was this review help?
4
5
Share
VanCharlie
08/12/25 7:22am
In my MG ZS, the fuel tank cap release is conveniently located on the left side of the driver's seat, near the door area on the floor mat. There's a small lever there—just pull it to open the cap. The design is quite thoughtful, allowing operation without leaving the car, which is perfect for quick refueling. If you can't find it at first, don't worry—it might be slightly covered by the floor mat. I recommend keeping the interior clear of clutter to prevent the switch from getting stuck. Always turn off the engine when refueling—safety first! Note that there might be minor variations in different model years; for example, newer versions might feature a button-style release, but the location remains similar. Regularly check the linkage mechanism to prevent dust buildup, which can lead to rust or malfunction, thereby extending its lifespan and avoiding unexpected issues that could disrupt your trip.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

What does 'passenger' displayed on the car mean?

passenger displayed on the car refers to the passenger seat. passenger airbag indicates the co-driver's airbag in the front passenger compartment. If passenger is accompanied by a seated figure, it represents the seat belt reminder for the front passenger. passenger airbag off means the passenger front airbag is deactivated, the passenger airbag is turned off, or it indicates the airbag off warning light. An airbag is a passive safety protection system designed to ensure the safety of vehicle occupants. It generally deploys automatically in the event of a severe collision to protect the safety of the people inside the car.
11
3
Share

Where to Add Windshield Washer Fluid in Volkswagen Magotan?

In the Volkswagen Magotan, the windshield washer fluid is added in the reservoir located in the engine compartment. Automotive windshield washer fluid is composed of various surfactants and additives, which have the functions of wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. It can significantly lower the freezing point of the liquid, thus providing an antifreeze effect. Taking the 2020 Volkswagen Magotan as an example, it is a mid-size sedan with body dimensions of: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, fuel tank capacity 66l, and curb weight 1445kg. The 2020 Volkswagen Magotan features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150ps, maximum power of 110kw, and maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.
15
1
Share

What does the triangle exclamation mark in the car mean?

Car appearing with a triangle exclamation mark indicates that the vehicle has encountered a conventional fault. The reasons that may trigger the illumination of the conventional fault indicator light include: 1. Issues with the car's transmission such as high temperature, loose transmission gears, or insufficient transmission oil; 2. Malfunction of the parking sensors, damage to front and rear radars, or circuit problems preventing the car's front and rear radars from recognizing objects; 3. Faults in the vehicle's lighting system, including headlights, turn signals, brake lights, and width indicators; 4. Engine problems like high temperature, cylinder misfire, or carbon buildup; 5. Poor fuel quality, faulty spark plugs, or blockage in the fuel system; 6. Drive system failure or ESP (Electronic Stability Program) body stability system malfunction; 7. ABS (Anti-lock Braking System) failure.
14
4
Share

How to Turn On Low and High Beams?

To turn on the low and high beams: 1. Rotate the light control lever switch located on the left side of the steering wheel all the way forward to turn on the low beams; 2. Push the lever upward to turn on the high beams. The difference between low beams and high beams lies in their illumination distance: low beams illuminate 33 to 40 meters, while high beams illuminate 80 to 120 meters. Precautions for using car lights include: 1. Turn on low beams when driving at night; 2. Do not use high beams when the following vehicle is close to the leading vehicle in the same direction; 3. When passing sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic lights at night, alternate between low and high beams as a signal.
18
3
Share

Why is the engine noise loud after just changing the oil?

The reasons for loud engine noise after an oil change are: 1. The oil viscosity does not match the vehicle; 2. Use of inferior quality oil; 3. Overfilling of oil; 4. Mixing different types of oil. The functions of engine oil include: lubrication and anti-wear, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Types of engine oil: 1. Conventional mineral oil; 2. Semi-synthetic oil; 3. Fully synthetic oil. The method for changing engine oil is: 1. Lift the vehicle, remove the undercover, and place a container of about 10 liters under the drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, tighten the drain plug after draining, and wipe and check for leaks with a paper towel; 3. Reinstall the undercover, lower the vehicle, and use a funnel to add oil into the filler port.
9
1
Share

Can dishwashing detergent be used to wash a car?

Dishwashing detergent should not be used to wash a car as it can damage the car's paint. Due to its degreasing properties, while it can remove dirt from the car's body, it will also strip away the car wax, leading to paint peeling. This not only affects the car's appearance but may also cause rust. Precautions for car washing include: 1. Do not wash the car when the engine is not completely cooled down, as this can cause premature aging of the engine. 2. Avoid washing the car under direct sunlight, as it can leave dried water spot marks on the body. 3. Do not wash the car in extremely cold weather, as water freezing can cause the paint film to crack. 4. Avoid using water other than soft water for washing, as it can damage the paint.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.