···
Log in / Register

Where is the fuel tank cap switch located on the C5?

4 Answers
AllieLee
07/29/25 7:37am
The fuel tank cap switch of the Dongfeng Citroen C5 vehicle is located below the left side of the driver's seat. Method to open the fuel tank cap: Locate the fuel tank cap switch of the Dongfeng Citroen C5 vehicle, lift the switch, and the fuel tank cap will open. C5 fuel tank capacity: The Dongfeng Citroen C5 has a fuel tank capacity of 70 liters, compatible with 92 and 95 octane gasoline. The MIIT-rated combined fuel consumption is 6.5 to 6.6 liters per 100 km. The vehicle dimensions are 4820mm in length, 1820mm in width, and 1480mm in height, with a wheelbase of 2815mm. It features a MacPherson strut front suspension and a multi-link independent rear suspension.
Was this review help?
7
4
Share
ArcherDella
08/13/25 1:37am
The fuel tank cap switch of the C5 is quite easy to find—it's located on the floor to the left of the driver's seat, roughly between the seat edge and the door sill. Back when I first started driving, I spent ages at the gas station searching for the switch, only to realize later that a gentle pull on the small lever does the trick without even needing to step out of the car. This design is actually quite user-friendly, far better than some cars where you have to fumble around under the steering wheel, especially convenient during rainy days when refueling. Just be careful not to let floor mats cover it—once I had full-coverage mats that blocked the lever, and I had to cut a notch to fix it. Also, remember to double-check that the cap is tightly secured after refueling; once I forgot, and the engine light came on, which gave me quite a scare.
Was this review help?
3
0
Share
Expand All
Brianna
10/04/25 8:09am
As an owner who has driven three generations of the C5, I'm quite familiar with the fuel filler cap switch. It's installed in the footwell area near the driver's left foot by the door, featuring a small pull handle with an icon. My wife got stuck at this step the first time she refueled my car, thinking there was a button on the center console, only to later discover this design is actually more practical. Normally, it's easy to reach with your heel, and it's less prone to accidental activation. The downside is that the cable might get stuck after prolonged use—my old C5 had this issue last year when the switch wouldn't budge, but it was fixed by removing the interior trim and spraying some WD-40. By the way, this switch is located in roughly the same area as the trunk release, so beginners shouldn't confuse the two—a friend of mine once made the hilarious mistake of pulling the wrong one.
Was this review help?
20
2
Share
Expand All
McAlejandro
11/18/25 2:56am
Don't struggle to find the fuel filler door release when driving a C5—it's right below the driver's seat. To be precise, look down near the floor under the steering wheel, close to the door side, and you'll spot a small lever marked with a fuel pump symbol. Just pull it to open. This manual location is actually more reliable than hunting for electronic controls in the infotainment screen of newer cars, especially since older vehicles' electronics often fail. A winter warning: it may freeze shut—last year at -20°C, I couldn't budge it until heating the mechanism with a hair dryer for five minutes. If the lever breaks, don't panic; there's an emergency release cable in the trunk. Always remember to turn off the engine while refueling—I once got an earful from attendants for forgetting this.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What Does It Mean When the Battery Warning Light Comes On in a Car?

The illumination of the battery warning light indicates that the generator voltage is lower than the battery voltage, resulting in a power supply circuit fault. At this time, the vehicle is running on battery power, and the generator should be inspected and repaired at a repair shop as soon as possible. Below are specific details about car batteries: 1. Classification of batteries: Car batteries are divided into maintenance-free batteries and conventional batteries (lead-acid batteries). Most current vehicle models use maintenance-free batteries, while many Japanese cars use conventional batteries. Conventional batteries have electrodes made of lead and lead oxide, with an electrolyte of sulfuric acid solution. Their lifespan is generally around 2 years, so replacing them every two years is most reasonable. 2. Regular maintenance: To extend the battery's lifespan, regular maintenance and good driving habits are necessary. When the electrolyte is insufficient, the battery may not hold a charge, requiring timely refilling. After turning off the car, ensure all lights are off to avoid excessive battery drain. If the car is parked for an extended period, it is recommended to disconnect the battery's negative terminal to prevent discharge. It is also advisable to start the car once a week, allowing the battery to charge at idle speed via the internal generator, ensuring sufficient power for the next start.
12
2
Share

What is the function of the camshaft?

Automobile camshaft is responsible for controlling the opening and closing of the valves. Below are the key points about the camshaft: 1. Camshaft: It is a component in piston engines. Although in four-stroke engines, the camshaft rotates at half the speed of the crankshaft, its rotational speed is still very high, and it needs to withstand significant torque. Therefore, the design requires high strength and robust support for the camshaft, which is typically made of high-quality alloy steel or alloy steel. 2. If: The oil pump fails to provide sufficient oil pressure due to prolonged use, or the lubrication passages are blocked preventing oil from reaching the camshaft, or the bearing cap fastening bolts are over-tightened preventing oil from entering the camshaft clearance, all these can lead to abnormal wear of the camshaft. 3. Abnormal wear of the camshaft: This can cause an increase in the clearance between the camshaft and the bearing seat, leading to axial displacement of the camshaft during operation, which in turn produces abnormal noise. 4. When installing the bearing cap: Pay attention to the directional arrows and position numbers marked on the surface of the bearing cap, and strictly follow the specified torque using a torque wrench to tighten the bearing cap fastening bolts.
9
3
Share

How to Check Tire Pressure on Audi Q5?

Audi Q5 tire pressure checking method: Start the car, view the central display screen and touch the CAE button on the left; enter the relevant menu information in vehicle settings, select tire settings in the vehicle settings options; in tire settings, click tire monitoring to view tire pressure. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure tire pressure, and uses wireless transmitters to send pressure information from inside the tire to the central receiver module, then displays the tire pressure data of each tire. When the tire pressure is too low or leaking, the system will automatically alarm. Indirect tire pressure monitoring: When the pressure of a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, resulting in its rotation speed being faster than other wheels. By comparing the speed difference between tires, the purpose of monitoring tire pressure is achieved. The indirect tire alarm system actually relies on calculating the rolling radius of the tire to monitor pressure. Introduction to Tire Intelligent Monitoring System (TPMS): It combines the advantages of the above two systems, equipping direct sensors in two diagonally opposite tires and a 4-wheel indirect system. Compared with using all direct systems, this composite system can reduce costs and overcome the defect that the indirect system cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data of the actual pressure in all four tires like the direct system.
20
2
Share

Where is the accelerator pedal located?

The accelerator pedal is located at the far right side below the driver's compartment on the left. The accelerator pedal is a device that controls the fuel supply on an internal combustion engine. In automotive engines, the throttle is typically controlled by a pedal, also known as the gas pedal, which regulates the fuel supply to the engine. When operating the accelerator pedal, it is important to 'press gently and release slowly.' The pressing action should be smooth, and the force and extent of pressing should be determined based on the vehicle's driving conditions. During driving, the left foot should not be placed on the brake pedal. For manual transmission vehicles, the left foot should only be used to press the clutch pedal when shifting gears. Under normal driving conditions, the left foot should not be placed on any pedal. Both braking and acceleration are controlled solely by the right foot. There are two key reasons why the left foot should not be placed on the pedal: 1. During prolonged driving, both feet can become quite tired, leading to an unconscious tendency to press down. If the left foot is on the brake pedal at this time, pressing it could easily cause an accident, posing a significant danger. 2. Most people are right-handed, meaning the right foot has faster reaction times. In emergency situations, the right foot can react in the shortest possible time, lifting off the accelerator and pressing the brake pedal. If the left foot is on the brake pedal, the right foot would be in a suspended state during braking, making it easy for both feet to press simultaneously, which can be dangerous.
2
2
Share

Must the Clutch Be Depressed When Braking in a Manual Transmission Car?

When braking in a manual transmission car, there are situations where the clutch needs to be depressed and others where it does not, as this is not a fixed procedure. The primary purpose of depressing the clutch while braking is to prevent stalling. Below are some considerations regarding clutch usage in manual transmission cars: 1. There is no need to depress the clutch when the speed has not reached the critical point. During turns, depressing the clutch can sometimes make the car more prone to tipping over, as it causes a sudden loss of tire grip. 2. The car will not stall if the speed is above 20 km/h in third gear, above 25 km/h in fourth gear, and above 35 km/h in fifth gear. This means that when braking during driving, each gear must maintain a speed above its minimum threshold; otherwise, the clutch must be depressed to prevent stalling. 3. When the speed is suitable for shifting to a higher gear, immediately release the accelerator pedal, depress the clutch pedal, and move the gear lever to the neutral position; then quickly release the clutch pedal and immediately depress it again while shifting the gear lever to the higher gear. Subsequently, gradually release the clutch pedal while slowly depressing the accelerator pedal to ensure the car continues to drive smoothly.
5
2
Share

At What Age Can a Baby Sit in a Safety Seat?

Safety seats are suitable for babies around seven months old. Here is some relevant information about safety seats: 1. Classification: Child safety seats can be categorized into three types based on the fixing methods: the European standard ISOFIX fixing method, the American standard LATCH fixing method, and the seat belt fixing method. 2. Installation Reminder: They should not be installed on the front seats of cars equipped with airbags. Additionally, it is important to note that if a child safety seat can be installed rear-facing, it must be installed in this manner, as this maximizes the protection of the child's safety.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.