Where is the fuel tank cap opened?

What is the fuel tank capacity of the 2014 Buick GL8?

2014 Buick GL8 has a fuel tank capacity of 77L. This data is official. Owners of the 2014 Buick GL8 can also check this information on the vehicle's configuration sheet. The 2014 Buick GL8 comes with two different engine displacements. The model with a 2.4L displacement uses 92-octane fuel, has an NEDC combined fuel consumption of 10.2L/100km, and can travel approximately 754km on a full tank. The model with a 3.0L displacement also uses 92-octane fuel, has an NEDC combined fuel consumption of 11.1L/100km, and can travel approximately 693km on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the remaining fuel. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that fuel can expand due to temperature increases without overflowing. If fuel is filled up to the tank opening, the actual refueling amount may exceed the marked capacity. Other factors affecting fuel consumption include: Vehicle weight: There is a direct correlation between vehicle weight and fuel consumption. A 10% reduction in weight can lead to a corresponding reduction in fuel consumption. Vehicle aerodynamics: A lower drag coefficient results in lower fuel consumption, while a higher drag coefficient increases fuel consumption. Tire pressure: Low tire pressure increases friction and adhesion, leading to higher fuel consumption. Driving habits: Aggressive acceleration and frequent braking can significantly increase fuel consumption. Wind direction: Driving with a tailwind reduces fuel consumption, while driving against a headwind increases engine workload and fuel consumption. Road conditions: Driving on flat roads consumes less fuel compared to rough or steep roads. Additional electronic devices: Using extra equipment like air conditioning increases fuel consumption.

13

2

Share

Can you turn right at a red light without a right-turn arrow?

You can turn right at a red light without a right-turn arrow. At a red light, you can turn right under the following circumstances: Circular traffic light, arrow-shaped right-turn indicator, or a sign added to a circular red traffic light. If there is an arrow signal light at the intersection, right turns are only permitted when the right-turn signal is green; otherwise, right turns are not allowed. If there is a "No Right Turn on Red" sign at the intersection, right turns are only permitted when the light is green. If there are no other signs at the intersection, vehicles can turn right at a red light as long as it does not interfere with other vehicles or pedestrians. Circular traffic light: If the circular traffic light turns red, vehicles in the right-turn lane can proceed to turn right. However, you must ensure not to interfere with other vehicles, pedestrians, or vehicles on the right side of the road. Arrow-shaped right-turn indicator: If you encounter an arrow-shaped right-turn signal at an intersection, you cannot turn right when the red arrow is lit. Turning right in this case would be considered running a red light. Sign added to a circular red traffic light: At some complex intersections, there may be a sign above the traffic light indicating whether right turns are allowed on red. If the sign says "Right Turn on Red Permitted," you can turn right. If it says "No Right Turn on Red," you must wait for the green light. Legal regulations: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicle and non-motor vehicle traffic signals indicate: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. According to the "Road Traffic Safety Law," traffic signal regulations are as follows: Article 25, Paragraph 2 states that traffic signals include traffic lights, traffic signs, traffic markings, and the directions of traffic police. Article 26 states that traffic lights consist of red, green, and yellow lights. Red indicates prohibition, green indicates permission, and yellow indicates a warning. Article 38 states that vehicles and pedestrians must follow traffic signals. If a traffic police officer is directing traffic on-site, follow their directions. On roads without traffic signals, proceed under the principles of safety and smooth traffic flow. Article 62 states that pedestrians crossing intersections or roads should use crosswalks or pedestrian facilities. At signalized crosswalks, follow the traffic signals. At unsignalized intersections or road sections without pedestrian facilities, cross only after confirming safety. Article 89 states that pedestrians, passengers, or non-motor vehicle drivers who violate road traffic safety laws or regulations may receive a warning or a fine of 5 to 50 yuan. Non-motor vehicle drivers who refuse to pay the fine may have their vehicle impounded. Driving a motor vehicle in violation of traffic signals results in a 6-point penalty. Right-turn precautions: Observe straight-moving vehicles on the left: When turning right, check both the right and left sides for vehicles. Observe left-turning vehicles from the opposite direction: In addition to straight-moving vehicles, also check for left-turning vehicles from the opposite direction. When turning right, yield to vehicles on the left, whether they are turning left or going straight. Observe pedestrians: When turning right, be aware of crosswalks not only at the intersection but also at the corner. Check for pedestrians on the crosswalk before turning.

18

5

Share

How is the warranty generally handled for used cars?

When purchasing a used car that is still under warranty, it is advisable to have maintenance and repairs done at a 4S dealership to the greatest extent possible to safeguard your legitimate rights and interests. If maintenance is not performed at an authorized 4S dealership during the warranty period, the manufacturer may consider that the owner has forfeited the warranty. In the event of any quality issues with the vehicle, the manufacturer will not provide warranty coverage.

13

2

Share

What are the precautions for driving with myopia?

Here are the precautions for driving with myopia: 1. Avoid using peripheral vision to check mirrors: When checking mirrors, try to turn your head slightly to minimize the prism effect at the edges of the lenses, thereby reducing errors and enhancing driving safety. 2. Slow down when driving at night: Visibility is lower at night, so it's essential to reduce speed to avoid unnecessary accidents. 3. Wear tinted lenses with polarizing function: These lenses not only correct myopia but also effectively block ultraviolet rays and glare, ensuring a worry-free driving experience.

3

2

Share

What is the normal RPM when driving at 120 km/h?

When driving at 120 km/h, the normal engine RPM should be between 2000 and 3000. An engine only demonstrates its true advantages when operating above 2000 RPM. The RPM range of 2000 to 4000 is considered the healthy operating zone, where the engine can perform optimally. Engine RPM refers to the rotational speed of the engine, which determines the number of work cycles per unit time or the effective power output of the engine. The effective power of an engine varies with different RPM levels. Therefore, when specifying an engine's effective power, the corresponding RPM must also be indicated.

10

3

Share

Which car brand does the 't' logo represent?

The 't' logo represents Tesla, a brand specializing in pure electric vehicles. The 't' emblem not only stands as the initial of inventor Tesla's name but also symbolizes the cross-section of an electric motor. Taking the Model 3 as an example, its dimensions are 4694mm in length, 1850mm in width, and 1443mm in height, with a wheelbase of 2875mm. This model is equipped with a single-speed transmission for electric vehicles, featuring a pure electric motor with 275 horsepower. The motor's total power is 202 kW, with a total torque of 404 Nm, and a maximum horsepower of 275 kW, capable of reaching a top speed of 225 km/h.

17

2

Share

Where is the fuel tank cap opened?

What is the fuel tank capacity of the 2014 Buick GL8?

Can you turn right at a red light without a right-turn arrow?

How is the warranty generally handled for used cars?

What are the precautions for driving with myopia?

What is the normal RPM when driving at 120 km/h?

Which car brand does the 't' logo represent?

Can a tire with exposed cords still be used?

How to Fold the Rear Seats of Wuling Hongguang S?

How to reset the maintenance light on JAC M5?

How to Use the Chevrolet Captiva 4WD?