Where is the fuel tank cap of the Tiguan L opened?

Is it normal for the coolant level to rise when the engine is hot?

It is normal for the coolant level to rise when the engine is hot because, in this state, the engine water temperature increases, causing the coolant to expand, which results in a higher coolant level. Under normal circumstances, the coolant is stored in both the main reservoir and the overflow tank, with the overflow tank only filled halfway or kept between the minimum and maximum level marks. When the engine is hot, the overflow tank can accommodate the expanded coolant. However, if the overflow tank is already full, some coolant may spill out during hot conditions, leading to waste. Therefore, it is essential to strictly follow the coolant refill requirements. Generally, conventional coolant should be replaced every 2 years or approximately 40,000 kilometers. For commercial vehicles (e.g., taxis), it is recommended to replace the coolant annually. Long-life coolant, on the other hand, can last for over 3 years. If suspended particles, sediment, or signs of deterioration are observed in the coolant, it should be flushed and replaced. Many people mistakenly believe that coolant is only necessary in winter, but this is not the case. Coolant is required year-round as it serves the dual purpose of preventing freezing in winter and overheating in summer. It protects the engine's cooling system, improves heat dissipation, and enhances engine efficiency.

1

3

Share

Should the AC Button Be Set to ON or OFF When Using the Heater?

When using the heater, the AC button should be set to OFF, meaning it is in the closed state, because turning on the AC is unnecessary when using the heater in winter. AC stands for Air-conditioning, which refers to air conditioning regulation. In the summer, pressing the AC button activates the compressor, which compresses air to blow out cold air. However, in winter, the car requires warm air to continuously raise the interior temperature to a level comfortable for the human body. The warm air is provided by the engine, which generates a significant amount of heat while running. At this time, the heat only needs to be directed into the air conditioning system, and warm air can then be blown out through the vents, so there is no need to turn on the AC button. Using the heater in winter does not increase fuel consumption. This is because the warm air blown out by the heater is generated by the engine's operation. Even if the heater is not used, this heat would still be expelled outside the car. In a way, using the heater in winter actually reduces the burden on other components of the car, such as the engine's cooling system. However, it is important to note that the heater should not be used for extended periods in winter. While the engine generates heat, it also produces harmful gases that can enter the car through the air conditioning system. Therefore, when using the heater in winter, it is advisable to open the windows periodically to ventilate the car, preventing significant harm to the human body.

13

1

Share

What Does It Mean When a Car Is in Idle Speed?

Idle speed in a car refers to the driving state where the engine consumes the minimum fuel required for normal operation while maintaining a speed of 1000r/min. Idle does not mean no fuel supply; it simply means providing the minimum fuel consumption necessary for the engine's normal operation, equivalent to the engine being separated from the car without any load applied to it. A normal speed of 1000r/min is considered idle speed. Reasons for unstable idle speed are as follows: Intake manifold or various valve leaks: When air, gasoline vapor, or combustion exhaust enters the intake manifold, it causes the air-fuel mixture to become too rich or too lean, leading to abnormal engine combustion. If the leak affects only individual cylinders, the engine may experience severe shaking, which has a greater impact on cold idle speed. Idle air actuator failure: A malfunction in the idle air actuator results in inaccurate idle air control. Causes for this phenomenon include damaged or stuck throttle motors; damaged or stuck idle stepper motors, duty cycle solenoid valves, or rotary solenoid valves; the car is in a rich fuel injection state during idle.

4

Share

What to Prepare for Long-Distance Driving?

Before embarking on a long-distance drive, it is essential to check the vehicle's condition, inspect critical systems, ensure sufficient fuel, and prepare for unexpected situations. Below is a detailed guide on what to prepare for long-distance driving: Before setting off, thoroughly inspect your vehicle to ensure it is in good working condition and safe to drive. The first thing to check is the tires, as they are the primary contact point with the road. Any issues with the tires could lead to a blowout, which can cause severe accidents, especially at high speeds. Therefore, a thorough tire inspection is crucial. Ensure all critical systems, such as the braking system, are functioning properly. The braking system plays a vital role in controlling the vehicle's speed and stopping it during emergencies, helping to prevent further accidents. Regular checks on the braking system are always beneficial. Always check the fuel levels before a long-distance trip. Since you'll be driving for an extended period, ensuring sufficient gasoline is essential. Additionally, other vital fluids like engine oil and lubricants should be topped up as needed. Performing proper maintenance before a long drive not only ensures a smooth journey but also extends the vehicle's lifespan. Prepare necessary items for emergencies, such as a warning triangle. No matter how careful you are, unexpected situations can arise while driving. Having a warning triangle on hand can alert other drivers in case of an accident, helping to prevent more severe collisions. This is another critical aspect of preparation.

2

Share

How Long Does a Car Polishing and Waxing Last?

Car polishing and waxing can typically last from 3 to 6 months. Both polishing and waxing help maintain the car's appearance and repair minor scratches. Very light scratches, such as hairline scratches, can be removed by waxing. For more severe scratches, polishing is required to eliminate them. Benefits of car waxing: Gloss enhancement: Enhancing gloss is the most basic function of car wax. Waxing improves the shine of the car's surface, restoring its original luster. Water and acid rain resistance: The protective layer of wax significantly reduces water droplet adhesion on the car's surface. Heat resistance: Cars exposed to high temperatures and sunlight for extended periods can experience paint aging and fading. The film formed by waxing effectively reflects light, preventing paint or base coat from aging and fading due to light exposure. Anti-static effect: Static electricity in cars is generated by friction between interior fabric and airborne dust during driving. Static electricity often causes inconveniences, but car wax effectively blocks dust from the car's surface, reducing static electricity. Benefits of polishing: Polishing is a consumable repair method that can fix minor scratches. By rotating the polishing pad, it grinds away the oxidized layer, scratches, and stains on the car's paint, restoring a smooth and glossy finish. A small amount of polishing is harmless and can be tolerated by the car's paint.

1

Share

Is Severe Oil Leakage at the Bottom of the Engine a Serious Issue?

Whether engine oil leakage is serious depends on the extent of the leakage, as the handling methods differ between minor and severe oil leaks. If the oil leakage is minor or merely caused by engine oil vapor, it generally isn't a significant issue and can be temporarily ignored until the next maintenance session or when time permits for a visit to the 4S shop for resolution. However, if the oil has started dripping, or there are large oil stains or direct oil leakage, this constitutes a severe condition that requires immediate repair to prevent potential engine damage, severe oil loss, or even spontaneous combustion due to excessively high temperatures. There are many sealing gasket components on or around the car engine. These rubber products, working long-term under high-pressure and high-temperature environments, are prone to aging. Once the sealing gaskets age, the engine may experience oil leakage. Rubber components such as the valve cover gasket are particularly susceptible to aging, with the aging of the valve cover gasket being the primary cause of oil leakage in most engines. Engine oil leakage is primarily characterized by the engine oil not decreasing rapidly, yet small amounts of oil stains are visible at the engine's sealing points, with no significant oil stains found on the vehicle's engine guard plate or the ground. Additionally, some vehicles may experience engine oil leakage due to wear and tear of the oil pan or crankshaft front and rear seal gaskets, loosening of the oil pan fastening screws, or issues with the quality of spare parts. Regardless of the cause of the oil leakage, it is not engine knocking and does not pose a major threat to the vehicle's condition. As long as the engine oil level is monitored regularly during subsequent use to ensure it does not undergo significant changes, the situation can be managed effectively.

9

2

Share

Where is the fuel tank cap of the Tiguan L opened?

Is it normal for the coolant level to rise when the engine is hot?

Should the AC Button Be Set to ON or OFF When Using the Heater?

What Does It Mean When a Car Is in Idle Speed?

What to Prepare for Long-Distance Driving?

How Long Does a Car Polishing and Waxing Last?

Is Severe Oil Leakage at the Bottom of the Engine a Serious Issue?

What is the Difference Between Off-Road Vehicles and SUVs?

Which country does Buick belong to?

Which country does Subaru belong to?

Is Frequent Car Washing Beneficial for Vehicles?