Where is the fuel tank cap of the Lavida located?

Why Is It Safest to Be in a Car During a Thunderstorm?

People inside a car are not struck by lightning during rainy days due to the physics principle known as the "Faraday Cage Effect." The so-called Faraday Cage principle states that when a hollow conductor is placed in an electric field, the electrons within the conductor move under the influence of the external electric field until electrostatic equilibrium is reached. At this point, the electrons no longer move directionally, the electric field distribution remains constant over time, and no charge exists on the inner surface of the metal cavity—charge is only distributed on the outer surface of the cavity. Solutions for foggy windshield on rainy days are as follows: 1. Lower the window: Slightly open the window to reduce the temperature difference between the inside and outside of the car, and the fog inside will disappear. 2. Turn on the air conditioning: After turning on the air conditioning, use the recirculation mode and adjust the vents to blow air onto the windshield to quickly clear the fog. 3. Turn on the heater: Adjust the switch to the heating position, increase the fan speed, and also set the vents to blow air onto the windshield to raise the interior temperature and dry the air.

8

5

Share

How to use the steering wheel cruise control?

The method to use the steering wheel cruise control is: 1. Press the control switch to activate the cruise control standby mode, accelerate to the desired speed, and then push the control lever downward to set the cruising speed; 2. To accelerate, push the control lever upward or step on the accelerator pedal; 3. To cancel the cruise control, pull the control lever upward, turn off the cruise control main switch, step on the accelerator pedal, or lightly tap the brake. Below is a brief introduction to cruise control: Cruise control, also known as speed control system or autonomous driving system, allows drivers to maintain a constant speed without continuously pressing the accelerator pedal, reducing fatigue during long highway drives and minimizing unnecessary speed changes, which can save fuel.

20

3

Share

How to Maintain a Car Purchased in Another City?

You can maintain a car purchased in another city locally. Regardless of where the car was purchased, you can go to the manufacturer's 4S stores nationwide for warranty and maintenance. As for some 4S stores charging customers a non-local management fee, this is not in compliance with regulations. If they insist on charging, you can call the manufacturer's 400 toll-free number to file a complaint. Below is additional information: 1. If you purchase a car in another city and there is no 4S store locally, here are some solutions for future maintenance: When purchasing a car in another city, you should take the free oil and oil filter provided by the 4S store where you picked up the car with you. This will help reduce future maintenance costs to some extent. 2. Relevant regulations: Within 60 days from the date the seller issues the purchase invoice or within 3,000 kilometers of driving (whichever comes first), if there are quality issues with the main components of the engine or transmission, the consumer can choose to replace the engine or transmission for free. The types of main components of the engine and transmission are specified by the producer on the warranty certificate.

8

4

Share

What are the rules for overtaking on highways?

Highway overtaking rules are as follows: 1. Lane introduction: On highways with two lanes on one side, the outer (right) lane is the driving lane, and the inner (left) lane is the overtaking lane. On highways with three lanes on one side, the outer lane is the driving lane, the middle lane is the first overtaking lane, and the inner lane is the second overtaking lane. Similar to regular roads, faster vehicles overtake from the inner lane, while slower vehicles keep to the right. 2. Overtaking signal: When overtaking, pay attention to the overtaking lane early and confirm there are no merging vehicles before signaling the intention to overtake. 3. Steering wheel control: When changing lanes, avoid sudden steering. Gradually move towards the left lane marking while smoothly turning the steering wheel to accelerate into the overtaking lane with a larger trajectory. This is especially important in rainy conditions to prevent vehicle skidding. 4. Focus: Once in the overtaking lane, avoid delays and concentrate on completing the maneuver efficiently. If other vehicles are also overtaking, maintain a safe distance. 5. Returning to the driving lane: Before moving back to the original driving lane, use the rearview mirror to confirm the position of the overtaken vehicle and ensure a sufficient safety distance. After signaling for at least 3 seconds, smoothly steer back into the driving lane.

17

5

Share

Does reversing in D gear on a slope damage the car?

Reversing in D gear on a slope is bad for the car's transmission, and there is also a risk of hitting the vehicle behind, which is unsafe. Starting on a slope with an automatic transmission is not entirely automatic. When the automatic transmission car is in D gear and the brake is released, there is a certain forward torque, and the movement is stopped by the brake. After releasing, the car will gradually start, so it will not reverse on gentle slopes. However, on steep slopes, the idle forward torque cannot sustain the weight of the car, and it will definitely reverse. Therefore, the method for starting on a slope is to accelerate immediately after releasing the brake, which can stop the car from reversing and move forward when the car reverses only slightly. Here is more information: 1. Stalling in D gear on a slope is because the slope is too steep, and the D gear transmission ratio is insufficient. In this case, it needs to be placed in 2nd gear or even 1st gear. 2. At this time, the transmission has a low gear ratio and high torque, which can overcome the weight of the car on a steep slope, maintain the engine speed, and keep it running without stalling.

14

5

Share

How many years until an operational vehicle is scrapped for a sedan?

Small and mini operational passenger vehicles have a scrappage period of 10 years, while large and medium-sized operational passenger vehicles have a scrappage period of 15 years. Small and mini taxi passenger vehicles are used for 8 years, medium-sized taxi passenger vehicles for 10 years, and large taxi passenger vehicles for 12 years. More relevant information is as follows: 1. Vehicle scrappage period: The vehicle scrappage period refers to a safety inspection system based on the number of seats and the duration of use for vehicles. It is stipulated that small and mini non-operational passenger vehicles, large non-operational sedans, and wheeled special-purpose machinery vehicles have no usage period restrictions. 2. Starting date of the period: The starting date of the vehicle usage period is calculated based on the registration date. However, if the registration procedure is not completed within 2 years from the date of manufacture, the manufacture date is used. Vehicles nearing 1 year before scrappage cannot be transferred or altered. If a vehicle is to be transferred or altered, the usage period and scrappage should be determined according to the following relevant requirements.

6

1

Share

Where is the fuel tank cap of the Lavida located?

Why Is It Safest to Be in a Car During a Thunderstorm?

How to use the steering wheel cruise control?

How to Maintain a Car Purchased in Another City?

What are the rules for overtaking on highways?

Does reversing in D gear on a slope damage the car?

How many years until an operational vehicle is scrapped for a sedan?

How to Connect to Car WiFi?

What is the fuel consumption of the Tharu 4WD?

What is the mandatory scrapping period for 7-seater minivans?

Are There Dash Cams That Don't Require Plugging In?