···
Log in / Register

Where is the fuel tank cap button of Buick Excelle?

5 Answers
LorenzoLee
07/29/25 1:26am

Buick Excelle's fuel tank cap button is located on the left side of the driver's seat. Pull up the fuel filler door switch to release the handle and open the fuel filler door. Taking the 2019 Buick Excelle as an example, it belongs to a compact car with body dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, a wheelbase of 2640mm, a fuel tank capacity of 44 liters, and a trunk capacity of 400 liters. The 2019 Buick Excelle is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125PS, a maximum power of 92kW, a maximum torque of 170Nm, and is paired with a 6-speed manual transmission.

Was this review help?
19
3
Share
LeGraham
08/12/25 11:13am

The other day I was driving my friend's Buick Excelle to refuel and noticed the fuel tank cap button is conveniently located on the driver's door panel. There's a dedicated small button with a fuel pump icon on the left interior trim - just press it gently to open the cap. This ergonomic placement saves you from bending down to reach outside the car, and the operation feels very natural. If you're a new owner who might not be familiar with it initially, I recommend testing it in good lighting after starting the car, or checking the owner's manual in the glove compartment for illustrations. Many cars have similar designs, but Buick's button has particularly good tactile feedback that minimizes errors. Remember to close the cap properly after refueling to prevent dirt from entering. If the button malfunctions, it could be due to a blown fuse or dirty switch - try cleaning it or visit a service center if needed.

Was this review help?
14
0
Share
Expand All
AngelinaRose
08/12/25 11:15am

I drive a Buick Excelle year-round for my daily commute. The fuel tank cap button is fixed on the inner side of the driver's door, right near the window control buttons. The small round button is designed to be very conspicuous. With just one press, the cap opens effortlessly, and the whole process takes less than a second, making it very convenient for daily driving. As a practical car owner, I find this location avoids the need to bend over, especially making refueling easier during rainy days or at night. You can also check the car's interior lighting system—if the button light is on but the cap doesn't open, it might be due to loose wiring or dust stuck inside. It's advisable to have the mechanic clean around the button during regular maintenance to keep it functioning smoothly. Additionally, this Buick model has good fuel efficiency, and it's best to wait a few seconds after the engine is turned off before refueling.

Was this review help?
6
5
Share
Expand All
DelCassandra
10/02/25 2:25am

Last time I test-drove the Buick Excelle, the fuel filler door button was located on the driver's side door panel, which was quite convenient to operate. With a gentle press, the fuel filler cap would pop open. The design near the door handle doesn't interfere with other functions. I'd suggest beginners not to get nervous; just practice pressing it while parked to familiarize yourself with its position. This button rarely malfunctions, but if it doesn't respond when pressed, make sure the door is properly closed or that the car key is within the sensing range.

Was this review help?
15
1
Share
Expand All
VonWillow
11/15/25 4:09am

In the experience of driving the Buick Excelle, the fuel tank cap button is integrated into the driver's door control panel, located near the left leg area. The button itself is made of black plastic with raised dot markings. The one-touch opening design ensures efficient operation, and I have never encountered any sticking issues. Additionally, the interior layout of Buick vehicles is logically clear, with buttons distributed reasonably, unlike some older models that require stretching to locate controls. In case the button malfunctions, check if the electrical system connections are secure, and avoid applying excessive force to prevent damaging the switch mechanism. Maintaining cleanliness during long-term use is also crucial.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

Is an ID card required for the simulated Subject 2 test?

No. Below is the relevant introduction to Subject 2: 1. Introduction: Also known as the small road test, it is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test subject. 2. Test items: The C1/C2 vehicle test items include five mandatory tests (reverse parking, parallel parking, hill start, right-angle turn, and curve driving, commonly known as the S-curve; some regions also include a sixth item, high-speed toll card collection). For large buses, city buses, medium buses, and large trucks, the test items include stake test, hill start, parallel parking, single-plank bridge crossing, curve driving, right-angle turn, narrow gate passing, continuous obstacle crossing, bumpy road driving, narrow road U-turn, as well as simulated highway driving, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
1
3
Share

What does 'no communication with the ABS pump' in the CS75 mean?

No communication with the ABS pump in the CS75 may indicate that there is no current passing through the ABS pump. Check if there is a fault in the wiring. Below is an introduction to the ABS pump: 1. Content: ABS is an improved technology based on conventional braking systems, which can be divided into mechanical and electronic types. Modern vehicles are widely equipped with anti-lock braking systems (ABS), which not only provide the braking function of conventional systems but also prevent wheel lock-up. 2. Function: It ensures directional stability during braking, preventing skidding and deviation, making it the most advanced and effective braking device in vehicles today.
20
4
Share

What Does Hydrogen Hybrid Vehicle Mean?

A vehicle that can provide electrical energy to drive the motor of a hybrid fuel cell vehicle through a fuel cell system. Hydrogen-powered vehicles are divided into two types: Hydrogen Internal Combustion Engine Vehicles (HICEV) are powered by burning hydrogen (usually obtained by decomposing methane or electrolyzing water) and oxygen in the air in an internal combustion engine. On the other hand, Hydrogen Fuel Cell Vehicles (Fuel Cell Vehicle - FCEV) generate electricity by passing hydrogen or hydrogen-containing substances and oxygen in the air through a fuel cell, which then drives the motor to propel the vehicle. The following are the power sources used in hydrogen hybrid vehicles: 1. The first scenario: Generally refers to using a traditional internal combustion engine (diesel or gasoline engine) and an electric motor as power sources. 2. The second scenario: The engine is modified to use other alternative fuels.
14
1
Share

How much electricity can one liter of gasoline generate?

One kilogram of gasoline can generate approximately 4 kilowatt-hours of electricity. Below is relevant information about automotive gasoline: 1. Overview: Automotive gasoline is a liquid fuel refined from petroleum, primarily used for cars and motorcycles. 2. Classification: In China, automotive gasoline is divided into unleaded and leaded categories. Unleaded gasoline has three octane ratings: 90, 93, and 95 RON (Research Octane Number). Leaded gasoline comes in three octane ratings: 90, 93, and 97 RON. Among them, the lead content in 90-grade gasoline does not exceed 0.35g/L, while the lead content in 93 and 97-grade gasoline does not exceed 0.45g/L.
6
1
Share

What is the suspension type of the Changan Honor chassis?

Changan Honor chassis adopts a five-link coil spring suspension. Below is an introduction about the Changan Honor: 1. Model Overview: The vehicle combines the comfort and versatility of an MPV, the sportiness and off-road capability of an SUV, the luxury and safety of a sedan, and the affordability of a microcar. It perfectly integrates six major advantages: stylish and imposing appearance, spacious interior, front-engine rear-wheel-drive layout, flexible handling, and more, creating a versatile business compartment that leads a new trend in business vehicles. 2. Main Features: Its exterior is jointly designed by Chinese and European designers, showcasing a European style. The front fascia and central grille are robust and imposing, resembling the design of Mercedes-Benz commercial vehicles. The interior is refined and elegant, with high-end practicality. The NVH noise reduction technology has reached the level of top-tier joint-venture vehicles, ensuring a harmonious and quiet driving experience for enhanced comfort and sophistication.
8
5
Share

What are the reasons for the lack of power in the eighth-generation Accord?

The main reasons for the lack of power in the eighth-generation Accord: 1. Poor atomization quality caused by insufficient fuel injection: This is mainly due to the clogging of the fuel injectors and the entire fuel injection system by gum deposits in the fuel. 2. Excessive carbon buildup: Excessive carbon buildup can cause varying degrees of knocking, leading to a noticeable loss of power. 3. High air-fuel ratio: The air-fuel ratio refers to the proportion of fuel to air. A high air-fuel ratio means there is too much air and too little fuel during the mixture, which naturally results in insufficient power. The air-fuel ratio is adjusted by the computer system based on combustion quality. When the computer system detects poor combustion quality, it increases the air intake to ensure proper exhaust emissions after combustion.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.