Where is the fuel pump module located in the BMW X3?

1 Answers
StAlan
07/29/25 11:04am
The fuel pump control module of the BMW X3 is located next to the fuel pump. Below is more information about the BMW X3: 1. Model: The BMW X3 is an SUV model with distinctive dimensions of 4454mm in length, 1798mm in width, and 1545mm in height, with a wheelbase of 2760mm. It introduces the new SUV Sports Activity Vehicle concept and is equipped with BMW's patented xDrive intelligent all-wheel-drive system. 2. Powertrain: The BMW X3 utilizes a classic 2.0T turbocharged engine paired with an 8-speed automatic transmission. This powertrain system has been widely used across BMW models, demonstrating exceptional stability and durability, along with robust power output. The acceleration from 0 to 100 km/h can be achieved in under 6.8 seconds.
Was this review help?
12
0
Share
More Forum Discussions

Do Volkswagen Cars Rust?

Volkswagen cars generally do not rust. However, rust can occur due to humid weather, prolonged use, or untreated scratches, so proper maintenance is essential. Avoid Using Car Covers Excessively: During windy or rainy weather, if the car is parked outdoors, the inner layer of the car cover may repeatedly flap against the paint, creating numerous tiny scratches on the body. If dust or sand gets inside the cover, the number of scratches will increase. Over time, this can also dull the paint. Additionally, after a sandstorm, avoid using a duster or cloth to wipe sand off the car directly. Instead, rinse the car body with water to prevent the sand particles from scratching the paint. Using Toothpaste to Prevent Rust: When the car has scratches, ordinary toothpaste can be used to treat them. Method: Apply the toothpaste in a circular motion over the scratched area. Reapply after rain or washing the car. This can help reduce the visibility of scratches and also acts as a barrier against rust, providing short-term protection. Applying Glaze to Soft Car Paint: During high-speed driving, vehicles with softer paint may develop fine scratches from windblown sand particles. If your car falls into this category, consider applying a glaze to the body. This creates a strong, mesh-like protective film that enhances the paint's hardness, with effects lasting about a year. Alternatively, paint protection film can achieve similar results. This method is widely used to prevent car rust.
8
1
Share

What is the reason for the 48V power failure displayed on the Mercedes-Benz C260?

It may be an electrical equipment failure. Here are the methods to troubleshoot electrical equipment failures: Resistance Test Method: This method involves using the resistance range of a multimeter to measure whether components such as motors, circuits, and contacts meet the nominal usage values and whether they are conducting or open. Alternatively, a megohmmeter can be used to measure the insulation resistance between phases or between phase and ground. During measurement, pay attention to selecting the appropriate range and verifying the accuracy of the meter. Generally, when using the resistance method, it is common practice to start with a low range. Also, ensure that the circuit being measured is not live and never measure under power. Voltage Test Method: The voltage test method involves using the corresponding voltage range of a multimeter to measure the voltage values in a circuit. Typically, measurements may include the voltage of the power supply or load, or sometimes the open-circuit voltage to determine if the circuit is functioning normally. When measuring, pay attention to the meter's range and select an appropriate scale. Generally, when measuring unknown AC or open-circuit voltages, it is advisable to use the highest voltage range to avoid operating under high voltage with a low range, which could damage the meter. Additionally, when measuring DC, be mindful of the positive and negative polarities.
8
2
Share

Where is the emergency trunk release switch for the 2013 Buick Excelle?

On models with fixed non-foldable rear seats, there is an emergency trunk release handle located under the center cover panel behind the rear seats. Open the cover panel and pull the rope handle inside to open the trunk. After use, please return the handle to its storage position. Additionally, the trunk switch on the Buick Excelle can be opened by pressing the trunk button on the remote key twice, or by pressing the button on the driver's side door trim panel. Below is an introduction to the Buick Excelle: Exterior: The new Excelle adheres to Buick's "dynamic and fluid" design language, drawing inspiration from the classic elements of the Riviera concept car. The body design is sporty yet retains a sense of stability, presenting a style that is both grand and simple, elegant and dynamic. The new winged chrome grille, combined with black piano vertical grille and high-gloss chrome winged grille, naturally draws the visual focus of the front to the logo. At the same time, the winged grille extends horizontally to the headlights on both sides, enhancing the horizontal visual effect and overall coherence of the front. Powertrain: The new powertrain system includes a 1.3T+48V mild hybrid engine and the classic 1.5L-DVVT four-cylinder engine, comprehensively balancing power, fuel efficiency, and a good driving experience. The diverse options cater to the needs of different consumers, delivering an efficient and agile driving experience.
8
1
Share

What is the suitable speed for the running-in period of a new Geely Vision?

For a new Geely Vision during the running-in period, the speed should not exceed 90 km/h, and the engine speed should not exceed 2,500 rpm. Running-in period: The running-in period generally refers to the process of contact, friction, and meshing of mechanical components during initial operation. Running-in is also called break-in. The running-in period of a car refers to the initial driving stage of a new car or after a major overhaul, usually 1,000~1,500 kilometers. This is the basic mileage to ensure full contact, friction, adaptation, and finalization of mechanical parts. Purpose of running-in for a new car engine: During the running-in period, the ability of various car components to adapt to the environment can be adjusted and improved, and the protrusions on the parts can be worn off. The quality of the car's running-in will have a crucial impact on the car's lifespan, safety, and fuel efficiency. Successfully completing the running-in period plays a vital role in future indicators such as durability, frequency of issues, fuel consumption, and engine power. Driving during the running-in period differs somewhat from driving after the running-in period. Paying attention to these differences is key to successfully completing the running-in period.
5
3
Share

What are the domestic independent car brands in China?

Domestic car brands in China include Wuling, Hongqi, Changan, Great Wall, Chery, Geely, Roewe, BYD, etc. The following is an introduction to domestic cars and joint-venture cars: Definition of domestic cars: Domestic cars refer to vehicles designed, developed, and manufactured by Chinese people, with independent intellectual property rights and Chinese-owned brands, belonging to independent brands. Definition of joint-venture cars: Joint-venture cars, as the name suggests, are projects jointly established by Chinese and foreign investors. The Chinese side contributes by providing land, factory usage rights, and capital, while the foreign investors provide brands, technology, capital, talent, etc. Joint-venture cars are the products of such collaborations. Foreign parties provide technology, talent, brands, etc., for assembly in China, but the core technology is still controlled by the foreign side.
7
0
Share

How many minutes does a car need to warm up?

Correct warm-up method: After starting the engine, wait for 30 seconds to one minute before driving. However, avoid driving at high RPMs at this time. Maintain a low speed with the engine RPM not exceeding 3000~3500, keeping it around 2000 RPM. Main reasons for warming up the car: After the car has been parked for a long time, the engine oil flows back into the oil pan at the bottom of the engine. Therefore, when starting, the upper part of the engine is in a state without oil and lacks lubrication. It takes about 30 seconds after starting for the oil pump to circulate the oil to the parts that need lubrication the most, such as the pistons, connecting rods, and crankshaft.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.