Where is the fuel pump located on the Dongfeng Fengguang 330?

2 Answers
DonovanLee
07/29/25 9:29am
The fuel pump is located inside the fuel tank, which is positioned under the rear seats or the trunk of the vehicle. Here is an introduction to the Dongfeng Fengguang 330s: 1. Dimensions: The Dongfeng Fengguang 330 has a wheelbase of 2725mm. The interior features a home-style color scheme with a dark upper and light lower section, and the design exhibits a distinct German influence. 2. Configuration: The high-end version of the Fengguang 330 is equipped with a 7-inch LCD screen and includes features like a rearview camera and GPS navigation system. For safety, it comes with an EPS electronic power steering system and airbags. 3. Power: The Fengguang 330 is powered by a DK15 engine, known for its stronger power, lower fuel consumption, and longer lifespan. It delivers a maximum power of 85kW with a fuel consumption of 7.1L per 100 kilometers.
Was this review help?
18
4
Share
AdrianAnn
08/12/25 10:12am
Speaking about the fuel pump location of the Dongfeng Fengguang 330, I need to share a few words from the perspective of a mechanic who frequently works on cars. It's well-integrated inside the fuel tank, and usually, you have to remove the rear seats or lift the rear seat cushion to find the access cover for removal. From my experience, the pump inside the tank is designed compactly, connected to fuel lines and wiring; once the pump fails, the car may not start or suddenly stall while driving, which is very dangerous. So never ignore warning signs like unusual noises or insufficient fuel supply. I recommend regularly checking the fuel tank filter to avoid clogs, and when replacing the pump, remember to disconnect the battery's negative terminal to prevent sparks—ensuring all safety measures are in place. It's best to have it handled by a professional shop rather than attempting DIY to avoid messing things up, as fuel leaks or short circuits can cause major trouble. Keeping the car's fuel system clean can extend the pump's lifespan and reduce unexpected failures.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

Can the front windshield be tinted?

The front windshield can be tinted. Here are the relevant details: 1. Advantages: Tinting the front windshield of a car is beneficial because it effectively blocks ultraviolet rays from outside, preventing the interior temperature from becoming too high during summer and affecting the driver's comfort. Additionally, tinting reduces the glare from oncoming headlights during nighttime driving, improving driving safety. 2. Precautions: The tint for the front windshield should be slightly lighter or use a clear film. When applying the tint, it is crucial not to obstruct the driver's field of vision.
15
4
Share

What is the fuel consumption of the Southeast DX3?

Southeast DX3, as an entry-level SUV under the Southeast brand, has relatively low fuel consumption and minimal noise. Here are the relevant details: 1. Southeast DX3: Currently equipped with the 4A91T engine, which is an upgraded version of the 4A91. It features turbocharging, an all-aluminum body, a DOHC valve structure, and uses traditional multi-point fuel injection technology. 2. Additional Information: The outdoor version of the Southeast DX3 uses Mitsubishi's 4A91T 1.5T engine. The maximum power is 156 horsepower (115 kW) at 5600 rpm, and the maximum torque is 220 Nm (225 Nm for the SR version) at 1800-4500 rpm.
9
5
Share

What is the cause of the P3073 fuel pump circuit electrical fault?

P3073 fuel pump circuit electrical fault is caused by an open/short circuit in the connection/wiring between the fuel pump and the fuel pump controller. Below is an introduction to the fuel pump: Introduction to the fuel pump: The fuel pump is a professional term in the automotive parts industry. It is one of the basic components of the fuel injection system in electronic fuel injection vehicles, located inside the vehicle's fuel tank. The fuel pump operates during startup and while the engine is running. If the engine stops but the ignition switch remains in the ON position, the HFM-SFI control module shuts off the power to the fuel pump to prevent accidental ignition. Function of the fuel pump: The fuel pump's function is to draw fuel from the fuel tank, pressurize it, and deliver it to the fuel supply line, working in conjunction with the fuel pressure regulator to establish a certain fuel pressure.
13
5
Share

What are the causes of car glass breakage?

Car glass breakage can be attributed to the following reasons: 1. Poor tempering process: Tempered glass inherently has a self-explosion rate of about 0.3% due to quality issues, which strictly speaking indicates a problem with the glass quality. 2. Uneven stress distribution: If the glass is installed without leaving sufficient edge clearance, it may expand when heated and press against the metal frame, leading to uneven stress distribution and ultimately causing the glass to crack. 3. Deformation: During the process of applying window film, if the glass is not heated evenly and a heat gun is used to shape the film, localized heating can cause uneven thermal expansion stress and deformation, resulting in glass breakage.
20
2
Share

Is an Annual Inspection Required for a Class B License?

B2 licenses require an annual inspection. According to regulations, a B2 driver's license must undergo an annual review. However, if there are no demerit points recorded within a scoring cycle, the inspection for that cycle is exempted. The B2 driver's license is subject to an annual inspection, which must be completed within 30 days after the end of the current scoring cycle at the local vehicle management office where the license was issued. Below are the procedures and precautions for the B2 annual inspection: Annual Inspection Procedures: The applicant must submit the required materials directly to the receiving window. Organize learning and education sessions for drivers, lasting no less than three hours, and maintain records. For drivers who have participated in the learning and education sessions, a certificate of completion will be issued. The receiving window will accept applications that meet the requirements; if the materials are incomplete or do not meet legal requirements, the applicant will be informed of the missing materials or the reason for rejection. After approval, an inspection certificate will be issued. Annual Inspection Precautions: For driver's licenses that have not undergone the annual inspection within the stipulated time, if the delay is less than three years, the driver must pass a traffic regulations theory test before the annual inspection can be resumed. For licenses that have not been inspected for more than three years, the driver must have the license revoked by the traffic police department, then personally apply to a local driving school. After passing the theory test, "pole test," and "road test" administered by the public security traffic police department, the driver can regain the license.
6
4
Share

What are the reasons for unclean car window wiping?

Reasons and solutions for unclean car window wiping: 1. The glass is too dirty. This is due to excessive dust. Spray more windshield washer fluid and wipe several times to clean it thoroughly. Always use washer fluid when wiping. 2. There is oil on the glass. If the car is parked in a place with oil fumes or if insects have collided with the glass, oil residue may be present. Oil is generally not easy to remove and usually requires car wash soap or foam cleaner to clean. 3. The wiper blade has oil. Many people forget that the wiper blade can also accumulate oil. After cleaning the glass, it is necessary to clean the wiper blade as well. This will make the cleaning more effective. The cleaning method is the same as above. 4. The wiper blade is damaged. This does not only refer to physical damage. Sometimes the wiper blade may be deformed, not adhering tightly to the glass, or not fitting closely during wiping. In such cases, it is best to replace it with high-quality parts. 5. The wiper motor is damaged. Besides being burnt out, the motor may have excessive gaps, causing the wiper blade not to adhere tightly to the glass. This can be detected through careful observation. 6. Not using windshield washer fluid. It is necessary to use washer fluid as it provides much better cleaning effects. Many people use water or water mixed with a little washer fluid. However, water is not very clean and does not effectively clean the glass.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.