Where is the fuel pump located in the Tiguan?

Will Running a Red Light While Turning Left Be Captured by Cameras?

Whether a motor vehicle runs a red light while turning left or going straight, it is considered a violation of traffic laws and will be captured by cameras if they are present. According to the relevant provisions of the Road Traffic Safety Law, vehicles must obey traffic signals, including traffic lights, traffic signs, road markings, and the directions of traffic police. If both the left-turn signal and the straight signal are green, proceeding straight from a left-turn lane violates the designated lane rules. When the left-turn signal is red, running the red light will result in penalties. Article 2, Paragraph 1, Item 2 of the 'Scoring Standards for Road Traffic Safety Violations' states that running a red light in a motor vehicle will result in a deduction of 6 points. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic lights: arrow signals and circular signals. If an arrow signal is present, check it first before looking at the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow signal is red, right turns are prohibited, and violating this rule will be penalized as running a red light. Brake in time: When the light turns red, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross the line and the rear wheels follow, the electronic camera will capture the violation, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed further; wait for the green light before continuing. Check the countdown timer before proceeding: When the green light flashes, if there is a countdown timer, use it to judge whether to proceed. If there is no timer and the vehicle is close to the intersection at a high speed, it may proceed to avoid braking too late and running the red light. If the vehicle is moving slowly and far from the intersection, brake immediately to stop and avoid the violation. Article 38 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People’s Republic of China' states the following for motor vehicle and non-motor vehicle signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian signals, non-motor vehicles and pedestrians must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered a violation under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If a violation is captured by surveillance cameras due to yielding, manual review will not record it as running a red light. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather conditions: When visibility is so low that even electronic traffic police cannot clearly see the traffic lights, the photographic evidence of the violation may be unclear. In such cases, mistakenly running a red light will not result in penalties. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may be unavoidable. After delivering the patient, provide proof from the hospital or the person assisted to the traffic police for verification. If confirmed, the violation records can be cleared. If possible, calling an ambulance is advisable to avoid accidents caused by running red lights. Following police directions: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers must follow the hand signals of the traffic police.

2

4

Share

Is Running a Red Light While Turning Left Captured by Cameras?

Running a red light while turning left is indeed captured by cameras. Whether it's turning left or going straight through a red light, both are illegal acts, and if there are cameras, they will be recorded. According to the relevant provisions of the "Road Traffic Safety Law," vehicles must obey traffic signals, including traffic lights, traffic signs, road markings, and the directions of traffic police. If both the left-turn and straight-through signals are green, going straight from a left-turn lane violates the prescribed lane rules. When the left-turn signal is red, running the red light will be penalized. Definition of Running a Red Light While Turning Left: Running a red light is determined based on the vehicle's stop line. If the vehicle crosses the line when the light is red, it is illegal. The camera primarily records the vehicle's movement when the light is red, focusing on significant positional changes. If the front wheels have just crossed the stop line when the light turns red and the vehicle stops immediately, the traffic police will not impose a penalty. However, if the vehicle continues to move completely after crossing the line, it is considered illegal and will be penalized. In other words, if the vehicle completes crossing the line (pressing the line) when the light is red, continues to move, fully crosses the line, and enters the intersection while the light is red, it is a violation. Six Scenarios of Running a Red Light: Stopping Immediately After Crossing the Line at a Red Light (When the light turns red, the vehicle fails to stop in time, and the front crosses the stop line): If the vehicle has just crossed the stop line when the light is red but stops immediately, this is not penalized as running a red light. However, if there is noticeable movement after crossing the line, it will be penalized. The electronic camera captures three photos to determine running a red light: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered running a red light, resulting in a 2-point deduction under the new regulations. Running a Red Light Under Traffic Police Direction (The signal is red, but the traffic officer signals to proceed): When there is a conflict between the traffic signal and the traffic officer's gesture, the driver must obey the officer's on-site command. If running a red light occurs due to the officer's direction, the driver can obtain a diversion certificate from the local traffic police department to avoid penalties. If the party disagrees with the penalty, they can appeal through administrative reconsideration or administrative litigation. Stopping After Fully Crossing the Stop Line at a Red Light (Failing to brake in time, causing the entire vehicle to cross the stop line): If the vehicle stops completely after crossing the stop line and does not move further, it is not considered running a red light. However, this is classified as stopping beyond the line. According to Article 4, Clause 5 of the "Points System for Road Traffic Violations," driving or stopping at an intersection not in accordance with the rules results in a 2-point deduction. Reversing After Stopping Beyond the Line (Attempting to avoid penalties by reversing after stopping beyond the line at a red light): Motor vehicles must not reverse at railway crossings, intersections, one-way roads, bridges, sharp turns, steep slopes, or tunnels. If reversing is performed illegally, a warning or fine may be imposed. Accidentally Running a Red Light Behind a Large Vehicle (Due to the large vehicle blocking the view, the driver follows it through the intersection): Drivers must maintain sufficient visibility to see the traffic signals ahead and ensure a safe braking distance. Generally, if a vehicle is photographed behind a large vehicle, it is due to rushing through the intersection. This behavior will be penalized as running a red light. Passing Through the Intersection During a Yellow Light (Crossing the intersection when the signal turns yellow): The traffic police department states that according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," vehicles that have already crossed the stop line when the yellow light flashes may continue to proceed. If the driver accelerates through the intersection when the yellow light is already on, being photographed under such circumstances will also be considered running a red light.

5

3

Share

What is the actual fuel consumption of the Lavida 1.4T?

The comprehensive fuel consumption of the Lavida 1.4T is 5.5L/100km. There are currently 2 models of the Lavida 1.4T on sale: the DSG Comfort Edition and the DSG Luxury Edition, both with a comprehensive fuel consumption of 5.5L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.56-8.39L/100km. When driving, the following 5 tips can help reduce fuel consumption: During the starting process, the vehicle should start in a low gear, gently press the accelerator, and accelerate slowly. Do not suddenly press the accelerator hard, as this will multiply fuel consumption. Light acceleration, light braking, and early braking: When driving, gently press the accelerator to avoid a sudden increase in engine speed and prevent the car from shaking during driving, thereby making the car more fuel-efficient. By estimating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be increased by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in the metric system relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or inspection of the vehicle: Regular oil changes can reduce carbon deposits (carbon deposits can cause poor ignition, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases); regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body at the recommended mileage. Close the windows while driving. Driving with windows open increases wind resistance. The greater the wind resistance, the greater the resistance the car faces, requiring more power and thus increasing fuel consumption.

9

5

Share

What is APS on a car?

APS (Accelerator Position Sensor) is the accelerator pedal position sensor, which functions as follows: 1. When the driver operates the accelerator pedal, the accelerator pedal position sensor generates corresponding voltage signals that are input to the throttle control unit, thereby controlling the throttle opening. 2. When there is a significant difference between the actual temperature inside the car and the set temperature, it switches to recirculation mode to quickly adjust the interior temperature to the set temperature. 3. Once the interior temperature reaches the set temperature, it continuously monitors the outside air quality. When the outside air quality is good, it automatically switches to fresh air mode, and when the outside air quality is poor, it automatically switches back to recirculation mode.

18

3

Share

Is the AMT Transmission Durable?

AMT transmissions are not durable and provide a poor driving experience with significant jerking. 1. The AMT transmission is essentially a manual transmission equipped with a control mechanism that enables automatic gear shifting and clutch engagement/disengagement. 2. This type of transmission represents early automatic transmission technology, where an additional control mechanism assists the driver in gear shifting and clutch operation. Additional Information: The functions of a transmission include: 1. Altering the gear ratio to meet varying traction demands under different driving conditions; 2. Enabling reverse driving; 3. Interrupting power delivery to the drive wheels during engine start, idling, gear shifting, or when stopping the vehicle while requiring power output.

15

2

Share

How to Identify a Car's Production Year?

Here are the methods to check the production year of a car: 1. The nameplate in the engine compartment; 2. The small nameplate around the door seam; 3. The Vehicle Identification Number (VIN) located below the windshield, where the 10th digit represents the production year; 4. The car's manual. The significance of knowing a car's production date includes: 1. It helps in the depreciation valuation when purchasing auto insurance; 2. It assists in determining whether the car is a stock vehicle when buying; 3. In case of safety-related recalls, the production date determines if the car falls within the recall range; 4. It helps in identifying the model year, as different model years have different configurations and part numbers.

10

1

Share

Where is the fuel pump located in the Tiguan?

Will Running a Red Light While Turning Left Be Captured by Cameras?

Is Running a Red Light While Turning Left Captured by Cameras?

What is the actual fuel consumption of the Lavida 1.4T?

What is APS on a car?

Is the AMT Transmission Durable?

How to Identify a Car's Production Year?

Can a Motorcycle with a Slipper Clutch Shift Gears Without Pulling the Clutch?

Can You Drive with Water in the Engine Oil?

Which tires are best for the Ford Kuga?

How to Take the Subject 4 Test Without an ID Card?