Where is the fuel pump fuse of the Bora located?

1 Answers
VonBrody
07/29/25 7:54pm
The fuel pump fuse of the Bora is located under the dashboard on the lower left side of the driver, in the same box as the other fuses. Introduction to the fuel pump: The fuel pump is a lightweight and compact pump, which can be categorized into three types: inline, distributor, and single-unit. The fuel pump requires a power source to operate, with its lower camshaft driven by the engine crankshaft gear. The function of the fuel pump is to draw gasoline from the fuel tank and deliver it through the pipeline and fuel filter to the float chamber of the carburetor. Location of the fuel pump fuse: The fuel pump fuse is located in the relay box in the engine compartment, rated at 15 amps. If the car does not start, first ensure that the central locking fuse in the cabin fuse box is not blown.
Was this review help?
14
0
Share
More Forum Discussions

Should the original car windshield be repaired or replaced?

In general, cracks in the windshield can be repaired. If the crack is only the size of a coin, it can be restored through repair. However, if the crack is too long, repair is not recommended because it is prone to re-cracking over time, and the strength of the windshield cannot be guaranteed, posing certain safety hazards. In such cases, the windshield should be replaced as soon as possible. Below is an introduction to car glass maintenance: 1. Proper use of windshield washer fluid: There are many types of windshield washer fluids available on the domestic market, but they can mainly be categorized into three types: summer-use windshield washer fluid, winter anti-freeze windshield washer fluid, and special anti-freeze windshield washer fluid. Summer-use windshield washer fluid is primarily used to remove insect residues from the glass surface. Winter anti-freeze windshield washer fluid ensures that car components are not damaged when temperatures drop below -20°C. Special anti-freeze windshield washer fluid is mainly used in extremely cold northern regions, ensuring the car remains unfrozen even at -40°C. 2. Purchase glass insurance for your car: Glass breakage insurance is a type of commercial insurance where the insurance company compensates for the loss of the insured vehicle's glass during use. Glass breakage refers to situations where only the windshield and window glass of the insured vehicle are damaged. 3. Apply window film to your car: In the scorching summer, heat-insulating film plays a significant role, not only blocking the intense sun but also providing heat insulation and UV protection. Industry experts point out that heat insulation is one of the key reasons consumers choose window film. Additionally, the film's light transmittance and UV protection index are important factors consumers should consider. However, many consumers have misconceptions when selecting heat-insulating film.
1
3
Share

Is There Insurance for Flood-Damaged Vehicles?

Flood-damaged vehicles are covered by insurance. You can purchase vehicle water submersion insurance, also known as water driving loss insurance or engine special loss insurance. Here are the relevant details: 1. Flood-damaged vehicles: These refer to vehicles that have been submerged in water, usually affecting the engine and transmission. Such vehicles pose significant risks, as the electrical circuits are prone to short circuits and fire hazards. 2. Hazards of flood-damaged vehicles: Since some sand and gravel cannot be completely removed and may remain in gears or belts, certain components are more susceptible to damage. Generally, repairing a flood-damaged vehicle involves removing the seats, interior parts, and panels to drain the water and clean out the mud. The engine must also be dismantled to inspect electronic components, particularly checking whether the computer motherboard is damaged.
14
0
Share

What is the Difference Between Bi-LED Projectors and Laser Projectors?

The differences between bi-LED projectors and laser projectors are as follows: 1. Bi-LED Projectors: Bi-LED projectors consist of LED chips, cooling fans, and lenses, featuring an integrated design without external drivers. Compared to original halogen bulbs, bi-LED projectors have lower power consumption and longer lifespan. Original halogen bulbs typically have a power rating of 55W-60W, while bi-LED projectors mostly range between 35W-45W, matching the original vehicle's power requirements. Moreover, the lifespan of bi-LED projectors is 10 times that of xenon lamps, reaching up to 30,000 hours. 2. Laser Headlights: Laser headlights also adopt an integrated design similar to bi-LED projectors, with some products having external drivers. The low beam of laser headlights uses LED light sources, while the high beam combines LED and laser light sources. Therefore, the main difference between laser headlights and bi-LED projectors lies in the high beam performance. Laser headlights offer higher brightness and longer range in high beam mode compared to bi-LED projectors. Unlike original laser headlights, aftermarket laser headlights can automatically activate the high beam unconditionally, delivering superior brightness and lighting effects.
18
1
Share

Why is the Audi A6 warning light on?

Audi A6 warning light may be on due to poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinders, or carbon deposits in the intake tract and piston tops. Relevant information about the Audi A6 is as follows: 1. Exterior Design: In terms of exterior design, the most significant change in the new Audi A6L compared to the previous generation is the transformation of the radiator and intake grille on the front fascia. What was once separated by the front bumper has now become a unified trapezoidal grille. This signature front-end design, characteristic of the latest members of the Audi family, seamlessly blends retro and classic elements with modern and fashionable styles. It not only reflects the authority of Audi's founder, Horch, who dominated the German luxury car market in the 1930s, but also embodies the brand's post-war revival philosophy, emphasizing technology and sportiness. 2. Performance: The new Audi A6L 10-year model boasts the most advanced and diverse engine lineup among high-end executive sedans. Among them, the 2.8FSI and 3.0TFSI high-efficiency gasoline engines are considered rising stars in Audi's global engine strategy. The 3.0TFSI engine is the latest top-tier version of Audi's V6 engine, combining gasoline direct injection and mechanical supercharging to deliver power surpassing that of an 8-cylinder engine while maintaining exceptional fuel efficiency. It produces a maximum power output of 213 kW (290 hp) and a robust torque of 420 N·m, enabling the new Audi A6L to accelerate from 0 to 100 km/h in just 6.6 seconds, with a fuel consumption of only 7.9 liters per 100 km at a constant speed of 90 km/h. Another globally leading engine, the 2.8FSI, features Audi's innovative variable valve lift system (AVS), achieving a fuel consumption of just 6.7 liters per 100 km at a constant speed of 90 km/h. Notably, as the flagship model, the new Audi A6L 3.0TFSI comes standard with adjustable air suspension.
19
2
Share

What Causes Abnormal Noises While Driving a Car?

Abnormal noises in a car can be caused by issues with the body, engine compartment, or tires. Below are several scenarios of car noises and their solutions: 1. Body Noises: This problem usually occurs due to insufficient body rigidity, causing the vehicle to deform while driving, leading to friction or shaking between doors and frames, or loose welds resulting in friction between metal sheets. Applying adhesive strips on doors and windows or placing rubber pads in friction-prone areas may reduce or eliminate the noise, but these are temporary fixes. Loose body components can also cause noises, which can often be resolved by tightening screws. 2. Engine Compartment Noises: There are various potential causes here. A high-pitched belt squeal is typically due to belt slippage. If there’s a metallic friction sound while the engine is running, it may indicate damaged bearings in the alternator, water pump, or power steering pump. A hissing sound could suggest a blocked exhaust system or a leaking/broken vacuum hose. Note that internal engine noises are usually beyond a car owner’s ability to fix and should be inspected by a professional. 3. Transmission Noises: If there’s a "grinding" sound from the transmission while driving that disappears when the clutch is pressed, it likely points to a transmission issue, such as worn bearings or gears, or bearing pitting. 4. Tire Noises: Tire noises often follow a rhythmic pattern, increasing with speed. A dull "thudding" sound may indicate tire tread deformation, bulging, severe wear, or low pressure. A "clicking" sound could mean small stones are stuck in the tread. A loud "whooshing" noise accompanied by noticeable shaking or steering pull suggests a tire blowout, requiring immediate replacement. 5. Suspension Noises: If you hear "thumping" or "clunking" sounds near the wheels over bumps, it’s likely due to shock absorber issues or loose suspension components. Have this checked at a reputable repair shop, as suspension problems affect both ride comfort and safety. 6. Engine Shield Noises: Screws on moving parts can loosen over time. If you hear a "rattling" noise near the grille, check if the engine shield screws are loose or if the shield is rubbing against other parts. Tightening screws and adding cardboard padding can often resolve the issue.
7
4
Share

Can Car Window Tint Protect Against Sunlight and UV Rays?

Car window tint can protect against sunlight and UV rays. Below are some relevant details about window tinting: 1. Precautions for tinting: When applying window tint, it's essential to choose high-quality film and have it installed by a professional shop. Inferior quality tint may not meet light transmittance standards, which can affect the driver's visibility during nighttime driving. It is not recommended to tint the front windshield, as this may impair the driver's view. When tinting the driver and passenger side windows, two sections should be left untinted to ensure clear visibility of the side mirrors. After tinting, avoid rolling the windows up or down, as this can cause the film to peel off. 2. Lifespan of window tint: Generally, car window tint can last about three years. After removing the tint, residual adhesive may remain on the windows. Before removing the adhesive, it should be softened to facilitate removal. Attempting to scrape off the adhesive without softening it first can leave scratches on the glass. After softening the adhesive with alcohol or essential balm, use a plastic scraper to remove it, avoiding hard metal tools that could damage the glass.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.