Where is the fuel pump fuse located in an Audi A6?

What are the main components of a continuously variable transmission?

The components of a continuously variable transmission: The transmission contains parallel shafts, an input shaft, a driving pulley shaft, a driven pulley shaft, and a main transmission shaft. The input shaft and driving pulley shaft are arranged in a straight line with the engine crankshaft, consisting of a sun gear, planetary gears, and a planetary carrier. More details are as follows: 1. The driving pulley shaft and driven pulley shaft are each composed of pulleys with movable and fixed wheel faces, connected by a steel belt. The driving pulley shaft includes the driving pulley, reverse brake, and forward clutch, while the driven pulley shaft includes the driven pulley, starting clutch, and intermediate driven gear integrated with the parking gear. The main transmission shaft consists of the main reducer driving gear and intermediate driven gear. 2. Working principle: The belt is wrapped around two conical pulleys, and the outer diameter of the pulleys is continuously varied by hydraulic pressure. During startup, the driving pulley diameter becomes the smallest, while the driven pulley becomes the largest, achieving a high transmission ratio. 3. As vehicle speed increases and various sensor signals change, the computer control system determines the hydraulic pressure controlling the two pulleys, continuously changing their diameters to achieve seamless shifting. Due to material limitations in the past, the belt between the conical pulleys could only withstand limited tension and torque, restricting its use to small-displacement motorcycles.

8

0

Share

Can you turn on the air conditioner when the car is not started?

You can turn on the air conditioner when the car is not started, but the air blown out by the blower is just the normal air inside the cabin. Here are the details about the car air conditioning system: 1. The car air conditioning compressor is driven by the engine power, so when the engine is not started, the compressor naturally does not work. 2. The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. The air conditioning system has become one of the indicators to measure whether a car is fully equipped. 3. When the car is turned off, the air conditioning compressor does not work. The natural air blown by the blower is powered by the battery. If you keep the air conditioner on for a long time without starting the engine, the car battery will be depleted. In mild cases, the car may not start, and in severe cases, it may cause the battery to remain in a state of undercharge for a long time. This only applies to traditional fuel vehicles; new energy vehicles will not have this problem.

14

0

Share

What is the development history of the Ford Mustang?

The Ford Mustang is a sports car launched by Ford Motor Company. The original platform of the Mustang was based on the second-generation North American Ford Falcon, and the original Ford Mustang concept was refined into the 1963 Mustang two-seater prototype. Here are the specific details about the Ford Mustang: 1. Body dimensions: The Ford Mustang measures 4794mm in length, 1916mm in width, and 1373mm in height. 2. Powertrain: The Ford Mustang comes in two versions: a 2.3L version and a 5.0L version. The 2.3L version is equipped with a 2.3L four-cylinder turbocharged engine, delivering a maximum horsepower of 299 HP, a maximum power output of 220 kW, and a maximum torque of 434 N·m, with a combined fuel consumption of 8.6L/100km as per the MIIT standard. The 5.0L version uses a 5.0L eight-cylinder naturally aspirated engine, producing a maximum horsepower of 466 HP, a maximum power output of 343 kW, and a maximum torque of 556 N·m, with a combined fuel consumption of 12.2L/100km according to the MIIT standard.

5

3

Share

Why Does the Buick Excelle Always Stall?

The reasons why the Buick Excelle always stalls are: 1. Excessive carbon buildup in the throttle body leading to insufficient throttle opening; 2. Aging spark plugs resulting in weak ignition energy; 3. Clogged fuel injectors causing reduced fuel delivery; 4. Short circuit or power failure in the engine or car computer; 5. Use of substandard fuel; 6. Poor fuel line flow; 7. Poor contact in wiring connectors; 8. Low fuel pressure from the fuel pump. Taking the 2020 Buick Excelle as an example, its body dimensions are: length 4468mm, width 1765mm, height 1469mm, wheelbase 2611mm, and fuel tank capacity 40l.

11

5

Share

What are the differences between the BMW 1 Series Sport Edition and the Shadow Night Edition?

Shadow Night Edition belongs to the high-end version. The following are the relevant introductions: BMW 1 Series: The BMW 1 Series is a model series of BMW. In 2015, the facelifted BMW 1 Series debuted at the Geneva Motor Show, marking the last facelift before the next generation of the 1 Series. The next generation 1 Series will no longer use rear-wheel drive but will adopt BMW's UKL front-wheel-drive platform, becoming a front-wheel-drive vehicle. 2020 120i Fashion Model: The 120i Fashion Model features LED headlights (extended range), dual exhaust pipes, rain sensors and automatic headlight control, external chrome trims, rear parking distance warning, and 225/45R17 tires equipped with a tire pressure monitoring system that supports driving with zero tire pressure. The rear is equipped with parking sensors and an image system. The interior features a three-spoke multifunction steering wheel adjustable in four directions, an 8.8-inch central control display, a keyless start system, and an optional keyless entry system. It comes with manual air conditioning, leather-wrapped seats, and rear seats that do not support folding. In terms of safety, it is equipped with six airbags, tire pressure monitoring, ABS anti-lock, brake assist, traction control, ESP vehicle stability, and other safety features.

15

5

Share

How to handle the P0340 fault code?

p0340 fault code treatment method is: check the camshaft position sensor circuit. The P0340 fault code refers to a malfunction in the camshaft position sensor A circuit, applicable to all car manufacturers. The camshaft position sensor's function is to transmit the relative position of the valves to the electronic control unit, controlling the timing of valve opening and closing. The fault code refers to: after a car malfunction, the code detected by the computer facilitates the accurate identification of the faulty part for repair personnel. The cause of the P0340 fault code is: the electronic control unit did not detect the sensor signal for the A camshaft position within the set time.

4

2

Share

Where is the fuel pump fuse located in an Audi A6?

What are the main components of a continuously variable transmission?

Can you turn on the air conditioner when the car is not started?

What is the development history of the Ford Mustang?

Why Does the Buick Excelle Always Stall?

What are the differences between the BMW 1 Series Sport Edition and the Shadow Night Edition?

How to handle the P0340 fault code?

Why is a three-day wait required after painting?

Why can't the car read the USB flash drive when starting?

Is the clock in the Mercedes-Benz E-Class from IWC?

What car has a G with a B logo?