Where is the fuel pump control module located in the Mercedes-Benz R350?

How many kilometers should the spark plugs of a Mondeo be replaced?

Mondeo's spark plugs should be replaced approximately every 60,000 kilometers. The spark plug consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. The Mondeo is a mid-size car under Ford. Taking the Mondeo 2020 180 Fashion model as an example, its body dimensions are: length 4873 mm, width 1852 mm, height 1470 mm, wheelbase 2850 mm, and fuel tank capacity 62.5 liters. The Mondeo 2020 180 Fashion model is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum power of 134 kW and a maximum power speed of 6000 rpm, matched with a 6-speed automatic transmission.

18

4

Share

Should Car Tires Be Deflated in Summer?

If the cold tire pressure is higher than the manufacturer's recommended standard tire pressure, then deflation is necessary; if the cold tire pressure is still below the standard tire pressure, do not consider deflation but rather add some air. The general principle is to maintain the manufacturer's recommended standard tire pressure, without deliberately increasing or decreasing it, as both overinflation and underinflation can have negative effects on the tires. Specific information is as follows: 1. Manufacturer's regulations: Under normal driving conditions, even in hot summer, simply inflate the tires according to the manufacturer's specifications, and there is no need to reduce the tire pressure on your own. 2. Cold and hot tire pressure: Cold tire pressure refers to the tire pressure when the car has not been driven. Hot tire pressure refers to the tire pressure after the car has been driven for a long distance.

11

3

Share

What is the Principle of Pure Electric Vehicles?

Pure electric vehicles operate on the principle that the driver controls the electronic accelerator pedal, sending analog electronic signals to the controller or processor. The controller or processor then processes these signals to regulate the motor's output power, speed, and direction of rotation. A pure electric vehicle is defined as a vehicle powered by an onboard power source, using an electric motor to drive the wheels, and meeting all road traffic and safety regulations. It consists of an electric drive and control system, along with a drivetrain mechanical system. The maintenance methods for pure electric vehicles include: 1. Inspecting the vehicle's paint for damage, the functionality of lights, the wear level of wiper blades, and tire wear and pressure; 2. Replacing the cabin air filter; 3. Checking and replenishing coolant, brake fluid, and windshield washer fluid; 4. Inspecting the power system's connectors and the insulation protection of wiring.

10

3

Share

What are the steps to replace the battery in a Mercedes-Benz key?

The steps to replace the battery in a Mercedes-Benz key are: 1. Remove the mechanical key; 2. Insert a tool into the slightly larger hole at the back of the key slot and gently pry it open; 3. Press lightly on the battery to remove and replace it, then reassemble the key in reverse order. Taking the Mercedes-Benz E-Class 2021 model as an example, its body dimensions are: length 5078mm, width 1860mm, height 1490mm, with a wheelbase of 3079mm. The Mercedes-Benz E-Class 2021 is equipped with a 2.0t turbocharged engine, with a maximum power of 220kw and a maximum torque of 400nm, paired with a 9-speed automatic transmission.

6

3

Share

What does it mean when a dash cam has no TF card?

A dash cam not detecting a TF card means that there is no memory card inserted into the dash cam, preventing it from functioning properly. Specific details are as follows: 1. TF card: The full name of a TF card is Trans-flash Card, and its role is to serve as the recording medium for the dash cam. Since dash cams need to record footage of the driving route and store videos, they require a TF card. Without a TF card, the dash cam cannot store recorded videos and thus cannot operate. 2. Correct camera installation position: Dash cams have front and rear cameras. The front camera is usually installed on the rearview mirror, while the rear camera is typically placed in the center of the rear windshield. Only when the cameras are correctly positioned can they display effective footage.

15

3

Share

How much fuel does a 1.5t car consume when running the AC overnight?

1.5t car running the AC overnight, depending on the vehicle's displacement, generally consumes over 10 liters of fuel. Additional information is as follows: 1. Engine: The engine's operation mainly maintains the functioning of the air conditioning compressor, water pump, oil pump, flywheel, etc. If the clutch is engaged (clutch pedal not pressed), the engine also needs to drive components like the transmission input shaft gears. 2. Engine idling: Engine idling also consumes a significant amount of fuel. If idling only drives the air conditioning compressor, more energy is wasted, and the engine remains at high temperatures for extended periods, potentially leading to carbon dioxide buildup.

20

4

Share

Where is the fuel pump control module located in the Mercedes-Benz R350?

How many kilometers should the spark plugs of a Mondeo be replaced?

Should Car Tires Be Deflated in Summer?

What is the Principle of Pure Electric Vehicles?

What are the steps to replace the battery in a Mercedes-Benz key?

What does it mean when a dash cam has no TF card?

How much fuel does a 1.5t car consume when running the AC overnight?

What does SVS displayed on the car dashboard mean?

What is the meaning of the jagged white solid line?

Where is the Auto Start-Stop Switch for the Buick GL8?

Can a car still undergo annual inspection if it has expired?