Where is the fuel line located in a car?

2 Answers
EmilianoLee
09/01/25 5:08am
Automotive fuel lines are typically routed from the fuel tank to the engine compartment at the front of the vehicle. In some models, they are externally mounted on the chassis, running through these recessed areas towards the engine. Certain manufacturers may design protective covers for these lines. Function of automotive fuel lines: The gasoline line connects the fuel pump to the engine's fuel injectors, supplying fuel to the engine. Structure of automotive fuel lines: Fuel lines are divided into supply lines and return lines. The supply line connects the fuel filter to the fuel pump, while the thinner line returning from the fuel injectors is the return line. The purpose of the return line is to allow excess fuel to flow back to the fuel tank when the pressure provided by the fuel pump exceeds 100 to 150 kPa, at which point the overflow valve in the return line of the fuel filter opens.
Was this review help?
2
4
Share
DelAnnie
09/13/25 7:53am
Hi, I've been driving for over a decade, and fuel lines are actually quite common in cars. Fuel lines generally refer to components like fuel hoses or brake lines, primarily located beneath the vehicle's chassis. For example, the fuel line starts from the fuel tank, which is usually under the rear seats or at the bottom of the trunk, then the hose runs along the chassis all the way to the front where it connects to the engine. When I change tires or perform maintenance, I often spot these black rubber or metal tubes in the gaps of the chassis. Sometimes, in humid weather, rust can cause leaks, and if you smell gasoline, you should immediately check these areas. Additionally, brake lines are similarly positioned, mostly near the wheels and in the engine compartment. If these hoses age and leak, it can be very dangerous, so I recommend that owners have their mechanics inspect the fuel lines during routine maintenance to ensure safety. Oh, and when checking under the car yourself, make sure the engine is off and avoid any ignition sources—safety first.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Can the lottery driving license information be changed?

Lottery driving license information can be changed. Vehicle management office processing procedures: Go to the vehicle management office, traffic police branch, or district (city) county traffic police brigade to take a number and then submit the materials at the acceptance window. Required materials: The original motor vehicle driving license of the applicant; the original valid identity proof of the applicant, and the valid residence permit for temporary residents; if the employing unit has changed, a certificate issued by the employing unit is required. Note: Foreign applicants who need to change their motor vehicle driving license information must provide valid foreign identity proof and a foreigner accommodation registration certificate issued by the local public security police station.
8
5
Share

How many consecutive hours can a motorcycle be ridden during the break-in period?

It is optimal for a motorcycle not to exceed one hour of continuous riding during the break-in period. Avoid prolonged riding: Air-cooled engines inherently have limited heat dissipation, and new engines have internal components that are not yet smooth, with tighter fitting clearances. Therefore, it is not advisable to ride continuously for extended periods. Generally, it is best to take a break every fifty kilometers or after no more than one hour of riding. Regarding break-in speed: First and second gears are used for starting and climbing steep slopes with a load, third gear is primarily a transition, while fourth and fifth gears are for normal riding. It is perfectly acceptable to ride slightly faster when there is sufficient power, even reaching speeds of eighty kilometers per hour is fine. Riding too slowly (below forty kilometers per hour) is actually detrimental to heat dissipation, and lower RPMs result in less oil supply from the oil pump, which is not beneficial for the break-in process.
18
1
Share

Can the A button of an automatic transmission be kept on all the time?

There is no problem with keeping the auto hold function on all the time, but since the auto hold function has an on/off button, there must be some situations where it is better to turn it off. One such situation is when encountering slow-moving traffic jams. Relevant information about auto hold is as follows: 1. Introduction: Auto hold, also known as AUTO-HOLD, refers to an automatic braking function. After activating this function, for example, when stopping at a traffic light, there is no need to pull the handbrake, which simplifies the operation by avoiding the use of the handbrake or electronic handbrake. For automatic transmission models, it also eliminates the need for frequent switching between D to N or D to P. 2. Working principle: The AUTO-HOLD auto hold function provides accurate parking force through a slope sensor controlled by the system. When starting, the parking control unit calculates information provided by sensors such as the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the driving resistance, the parking brake is automatically released, allowing the car to start smoothly.
20
5
Share

What compression ratio motorcycles should use 95 octane gasoline?

Motorcycles with a compression ratio between 8.5-9.0 should use 93-95 octane gasoline; those with a compression ratio between 9.5-10.0 should use 95-97 octane gasoline. Compression Ratio: The minimum working volume of the cylinder, i.e., the total volume above the piston when it is at top dead center, is called the combustion chamber volume. The maximum volume of the cylinder, when the piston is at bottom dead center, is called the total cylinder volume. The ratio of the total cylinder volume to the combustion chamber volume is the compression ratio. Function of Compression Ratio: The compression ratio indicates the degree to which the gas in the cylinder is compressed when the piston moves from bottom dead center to top dead center. The compression ratio is one of the important parameters of an engine. In modern automotive engines, due to the limitations of knocking, gasoline engines generally have a compression ratio of 8-11. Diesel engines, not limited by knocking, typically have a compression ratio of 12-22.
6
5
Share

Can I modify a front bumper?

If the modification is not reported, the annual inspection will not pass. If the modification is reported and the vehicle license is updated, the annual inspection can pass. Registration process: At the vehicle management office, first fill out the vehicle modification registration application form, then drive the car to imprint the engine number, take new photos for the vehicle license, and wait for the inspection line test. After the vehicle management inspector confirms that the modification does not affect the vehicle's safety performance, the registration can be completed, and a new vehicle license can be issued. The entire front bumper approval process can then be completed. Modification notes: Ensure that the modified front bumper does not change the original vehicle's length and width, and the overall dimensions remain consistent with the factory data on the registration certificate. Then, bring your ID card and vehicle license to the vehicle management office for modification registration.
18
0
Share

Can the Engine Still Run After Major Overhaul Due to Water Ingress and Cylinder Block Cracking?

Engine after major overhaul due to water ingress and cylinder block cracking can still run, but it is best not to use the repaired engine as it poses significant safety hazards. Engine: It is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. Impact of Engine Repair: Repairing an engine after water ingress is equivalent to a major overhaul, which will affect the engine's performance to some extent, but the extent of impact varies depending on the degree of water ingress. The repair process inevitably involves engine disassembly, followed by inventorying and replacing damaged components. Generally, original or aftermarket parts will be replaced at a 4S store.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.