···
Log in / Register

Where is the fuel filter of the Buick Excelle located?

3 Answers
AaliyahRose
09/06/25 8:29am
The fuel filter of the Buick Excelle is located next to the activated carbon canister, specifically near the right rear wheel. It can be seen when the vehicle is lifted. The fuel filter is a type of fuel strainer, which includes both gasoline filters and diesel filters. Its main function is to filter out impurities from the gasoline. The Buick Excelle is a compact car under the Buick brand, with dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, and a wheelbase of 2640mm. The front face of the Buick Excelle features a large air intake grille, adorned with chrome trim strips. The headlights are connected to the grille, further highlighting the car's sporty character.
Was this review help?
17
2
Share
DelRichard
09/18/25 8:00am
As an owner of a Buick Excelle, I can share that the fuel filter is typically located inside the fuel tank, integrated with the fuel pump in a unified design. This reduces exposure risks but makes DIY replacement much more complicated. If you want to inspect it, you'll need to remove the trunk floor panel or underbody shield - I'd recommend visiting a professional service center to avoid gasoline leakage and fire hazards. During regular driving, pay attention to the filter's condition. It should be replaced approximately every 50,000 kilometers to prevent impurities from clogging the fuel injectors and affecting engine performance. Long-term neglect can lead to increased fuel consumption and sluggish acceleration. Regular maintenance can save you significant repair costs. I recall the manual also emphasizes this point - safety comes first, so don't stubbornly attempt DIY repairs.
Was this review help?
6
5
Share
Expand All
McRyan
11/01/25 8:25am
I've been into cars for several years now. The fuel filter of the Buick Excelle is mostly located inside the fuel tank module, a modern design that pursues compactness but sacrifices maintenance convenience. Replacing it requires specialized tools to disassemble part of the fuel tank, with steps including disconnecting the battery and draining the gasoline. Any operational mistakes can easily lead to safety issues. I recommend first consulting the vehicle's manual or online resources to confirm differences across model years. A dirty filter can reduce fuel efficiency and cause engine shaking. For related maintenance, I suggest checking every 30,000 to 60,000 kilometers. Combining this with cleaning the fuel system can extend component lifespan—don't delay until problems arise just for the sake of convenience.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

What is the normal tire pressure for the Geely Boyue?

The normal tire pressure for the Geely Boyue is between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The tire pressure monitoring system in the Geely Boyue can be viewed on the dashboard, which includes special function prompts (tire pressure monitoring, active safety information, including distance alerts, ACC cruise mode, lane departure warning, collision warning, PEPS, etc.). The tire pressure monitoring reset method for the Boyue is relatively simple—just drive for a while, and it will return to normal data without any additional settings. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: 1. Abnormal tire pressure. Typically, the system will alert if the pressure is below 1.8 bar or exceeds 3.0 bar. In such cases, the tire should be checked and the pressure adjusted. 2. The tire pressure monitoring system was not reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system may still record the previous data, causing the indicator light to remain on. Simply performing a tire pressure reset will resolve this issue. 3. Damaged tire pressure sensor. The tire pressure sensor, which is installed inside the tire and connected to the tire valve, monitors the tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light may also illuminate. In such cases, the only solution is to replace the sensor with a new one.
12
0
Share

Is the red terminal on a car battery positive or negative?

In a car battery, the red terminal is positive, and the black terminal is negative. The method for jump-starting a car battery is as follows: 1. Prepare two jumper cables; 2. Find a vehicle that can operate normally; 3. Position the two vehicles facing each other; 4. Connect the jumper cables to the batteries, positive to positive and negative to negative; 5. Start the functioning vehicle first, then start the vehicle being jump-started, and disconnect once started. Methods for maintaining a car battery: 1. Regularly inspect the battery; 2. Avoid overcharging; 3. Gently press the brake when starting; 4. Ensure the battery is fully charged if the vehicle is parked for an extended period; 5. Protect the battery from excessive heat and extreme cold.
10
4
Share

How to Tell if a Used Car's Odometer Has Been Rolled Back?

Here are specific methods to determine if a used car's odometer has been rolled back: 1. Check maintenance records: Visit the 4S shop to inquire about the vehicle's maintenance records. This is the simplest and most straightforward method. It is particularly suitable for relatively new cars, as such vehicles are typically serviced at 4S shops, allowing access to their maintenance records. 2. Observe interior wear and aging: Experienced mechanics can often spot discrepancies by examining the wear and aging of the interior, as wear levels are proportional to the vehicle's mileage. Key areas to inspect include: the dust cover under the gear lever, door panels and handles, dashboard buttons, center console, seat edges for wear and shine, which can help estimate the vehicle's mileage. 3. Check steering wheel and pedal wear: The wear on the steering wheel, accelerator pedal, brake pedal, and clutch pedal directly reflects the vehicle's usage frequency. These are the parts most frequently touched by the driver. While some drivers use steering wheel covers to reduce wear, subtle signs of wear can still be detected. 4. Tire wear and production date: Experienced drivers know that car tires typically last around 50,000 to 60,000 kilometers. If the tire treads are flat or the edges are worn smooth, it indicates the car has been driven extensively. When inspecting a used car, if the four tires show uneven wear, it may suggest the car was involved in an accident. If all tires have been replaced, the mileage likely exceeds 50,000 kilometers. 5. Inspect the OBD port: Another method is to check the OBD port, though this is less commonly used unless for maintenance checks, so it can serve as a supplementary reference.
1
3
Share

How to Open the Hood of a Buick Car?

Method to open the Buick hood: 1. There is a handle below the left hand side of the driver, pull it; 2. After the front hood is opened, reach inside and feel upwards, there is a mechanical lock, press the button down; 3. The hood release is located on the left side of the foot pedal, there is a hook, pull it, there is a hook at the front of the hood, press it upwards with your hand, sit in the driver's seat, there is a release lever next to the left knee, pull it to open the first safety latch; 4. Face the vehicle, there is a lever in the middle position, lift it upwards to open the second safety latch, after opening the steering wheel, there is a black thing at the lower left, then pull the front cover, and the engine hood will be opened.
11
1
Share

How to Turn Off the ECO Mode in Land Cruiser?

To turn off the ECO mode, there is a button next to the gear shift. On the left is ECT, and on the right is 2nd gear start. When you press the button towards the ECT direction, the ECO mode will be turned off. The ECO mode in cars serves the following three purposes: 1. The car's ECO is an energy-saving mode: When the ECO mode is activated, it comprehensively evaluates and analyzes factors that affect fuel consumption, such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature; 2. The ECU control unit calculates the optimal fuel amount and supplies it to the engine for operation: This effectively reduces fuel consumption compared to normal driving modes; 3. After activating the ECO mode, the throttle opening corresponding to the same accelerator pedal depth is smaller: The transmission shift logic prioritizes fuel economy, and it also adjusts the air conditioning output power.
12
3
Share

What to Do When the Tail Lights of a Sedan Stay On?

The methods to address continuously illuminated tail lights on a sedan are: 1. Check if the brake switch is short-circuited and replace it if necessary; 2. Visit a 4S store or a professional repair shop for expert assistance. Tail lights are installed at the rear of the vehicle, with the main color being red to enhance the penetration of the light source, ensuring that following vehicles can spot the car ahead under low visibility conditions, thereby preventing rear-end collisions. The replacement steps for sedan tail lights are: 1. Use a cross screwdriver or socket to remove the bolts; 2. Pull the light assembly out from the rear pillar; 3. Turn the socket counterclockwise and remove it; 4. Remove the old bulb and insert a new one.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.