Where is the fuel filter located on the Changan Edge?

Does Increasing Air Intake Enhance Car Performance?

Increasing the air intake in a car can enhance performance because a larger air intake volume results in a leaner air-fuel mixture. The oxygen sensor on the exhaust pipe detects this change and adjusts the fuel injection to maintain normal emissions. Methods to Enhance Car Performance: Engine Modification: The most effective way to boost performance is by upgrading the ECU program. This modification can alter the engine's ignition timing, fuel injection timing, RPM limit, torque limit, and more, enabling the engine to operate more efficiently. Ignition System Modification: The ignition system is a critical component of the engine, comprising the power source, ignition trigger signal, ignition timing control signal, high-voltage ignition coil, high-voltage wires, and spark plugs. The quality of ignition performance and the timing of ignition significantly affect fuel combustion efficiency, indirectly influencing engine power. Therefore, modifying the ignition system primarily aims to address the shortcomings of the original system, focusing on precise ignition timing, increasing ignition intensity, extending ignition duration, and reducing voltage transmission losses. Air Intake Modification: There are several methods to modify the air intake system. Installing a high-performance intake manifold is a highly effective approach. Original intake manifolds are typically cast, featuring rough inner walls and noticeable mold lines, which negatively impact intake efficiency and airflow smoothness. High-performance intake manifolds have smoother inner walls, improving intake efficiency without losses. Additionally, upgrading to a mushroom-style air filter and installing an intake turbo in the intake hose are both effective and cost-efficient modification methods.

5

4

Share

What is the difference between turning on ECO and not turning on ECO in the 2021 X-Trail?

Turning on ECO can reasonably control the engine speed through gear selection to reduce unnecessary fuel consumption. ECO mainly makes comprehensive judgments and analyses on conditions that affect fuel consumption during vehicle movement, such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit then calculates the optimal fuel quantity to be supplied to the engine for operation, effectively reducing fuel consumption compared to normal driving mode. In a few cases, it is unnecessary to turn on ECO: When the car is driving at high speed (up to 100km/h), even if ECO is turned on, the onboard computer will prioritize speed, and the ECO mode will automatically deactivate. When a large torque output is needed, such as when climbing a mountain, the engine computer will prioritize ensuring and providing sufficient power to drive the vehicle, and the ECO mode will automatically deactivate. Modes: Generally, it can be divided into two types: non-active ECO driving mode and active ECO driving mode. The non-active ECO driving mode mainly serves as a reminder and guidance function. The active ECO driving mode usually has a button, and after activation, a series of driving-related settings will change. For example, the throttle opening corresponding to the same accelerator pedal depth will be smaller (the accelerator becomes less sensitive), the transmission shift logic will be more focused on economy (shifting up earlier), and some vehicles will also adjust the air conditioning output power simultaneously.

9

2

Share

What is the first step of the driving test?

The first step of the driving test is to register at a driving school. The materials required for applying for a driver's license include: the original "Motor Vehicle Driver's License Application Form", the "Physical Condition Certificate for Motor Vehicle Drivers", and the original and photocopy of the applicant's identity proof. Follow-up content: Carry the student card and notice issued by the driving school to attend a two-day theoretical study. Participate in the Subject 1 exam (written test). After verifying the student's information, the driving school will arrange the Subject 1 exam. Participate in the Subject 2 exam. Students use their training card to train at the designated training ground. Both training and the exam consist of 5 items: reversing into a garage, stopping and starting on a slope, parallel parking, driving on a curve, and making a right-angle turn. Participate in the Subject 3 exam, which includes preparation before starting the car, starting, driving straight, and shifting gears within 100 meters. Participate in the Subject 4 exam, which tests road driving and safe and civilized driving. After passing all exams, you can receive your driver's license. Driving test results can be checked via the 12123 mobile app: Download the 12123 app on your phone. After downloading, register and log in. Once logged in, click on "More" on the homepage interface, find "Driver's License Services" in the "More" interface, and then locate the "Exam Reservation" option under "Driver's License Services". Under this function, you can check your previous exam results.

12

5

Share

What is formoza tire?

formoza is a comfort-oriented tire series under the Federal Tire brand. Federal is an independent brand established by Ta Feng Tire Co., Ltd. in 1954. Through technical collaborations with two major tire manufacturers - Bridgestone Corporation of Japan from 1960-1979 and Sumitomo Rubber Industries of Japan from 1981-2000 - Federal Tire has accumulated substantial R&D capabilities, leading to the creation of its own brand: Federal Tire. When using formoza tires in daily driving, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. As tread wear occurs during driving, the groove depth gradually decreases. Worn-out tread patterns lose their water drainage and anti-skid functions, significantly reducing vehicle performance. Even minor cracks can become potential hazards for tire blowouts during high-speed driving. Additionally, promptly remove pebbles lodged in grooves; Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Keep vehicles away from petroleum products, acids, or other materials that may cause rubber deterioration. After parking, drivers should avoid turning the steering wheel as this accelerates tire wear; Do not use water for cooling. In hot weather or during high-speed driving, tires are prone to overheating with increased pressure. In such cases, park to allow natural cooling - never release air pressure or splash water for cooling to prevent abnormal tread rubber aging; Avoid sudden braking. Minimize frequent or emergency braking to prevent accelerated tread wear caused by tire-ground dragging.

10

5

Share

Is it better to buy a car from a 4S store or an auto trade store?

You can purchase a car from either a 4S store or an auto trade store, but 4S stores generally offer better after-sales service, while auto trade stores provide lower prices. The differences between 4S stores and auto trade stores are as follows: 1. Price difference: Auto trade stores are secondary dealers, and the cars they sell come from 4S stores. They acquire vehicles at internal cooperative prices with 4S stores or profit from regional price differences between 4S stores. 2. Difference in car quality sources: Cars in 4S stores are directly supplied by the manufacturer, ensuring quality. In contrast, auto trade stores source cars from various regional 4S stores, which may include inventory vehicles or test-drive cars. Although the configurations of these cars may be fine, issues such as battery drain or fuel system malfunctions might arise. Additionally, transportation between regions can lead to wear or minor damages. 3. After-sales service difference: 4S stores integrate sales, maintenance, parts supply, information services, and after-sales support, whereas secondary after-sales services from auto trade stores lack reliable guarantees. If an auto trade store performs unauthorized driving or repairs, the 4S store may refuse to provide warranty services. Purchasing from a 4S store offers better assurance for maintenance and repairs. 4. Insurance difference: Some auto trade stores require customers to purchase car insurance in-store, often from small, less reliable insurance companies. In the event of an accident, claims may be denied.

16

0

Share

What is the fuel consumption of the 2021 Mazda Atenza?

The comprehensive fuel consumption of the 2021 Mazda Atenza is 6.3-7.1L/100km. There are a total of 6 models of the 2021 Mazda Atenza available for sale. The Skyline Premium version has a comprehensive fuel consumption of 6.3L/100km. The Skyline Fashion version and Skyline Luxury version have a comprehensive fuel consumption of 6.4L/100km. The Skyline Ultimate version has a comprehensive fuel consumption of 7L/100km. The Skyline Sport version and Skyline Prestige version have a comprehensive fuel consumption of 7.1L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.0-8.6L/100km. The level of car fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase car fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacements consume more fuel than those with smaller displacements because larger displacements generally mean higher power, requiring more gasoline to burn and perform work. Cars with greater self-weight will have higher fuel consumption because greater self-weight requires more driving torque. Road conditions: Dirt roads, muddy roads, soft surfaces, mountain roads, etc., where driving resistance is high, will increase fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start is not easy to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. At the same time, low temperatures cause the engine computer to control the car to warm up at higher RPMs, which also increases fuel consumption.

10

4

Share

Where is the fuel filter located on the Changan Edge?

Does Increasing Air Intake Enhance Car Performance?

What is the difference between turning on ECO and not turning on ECO in the 2021 X-Trail?

What is the first step of the driving test?

What is formoza tire?

Is it better to buy a car from a 4S store or an auto trade store?

What is the fuel consumption of the 2021 Mazda Atenza?

How to Reset the Tire Pressure Monitoring on the Verano?

What are the causes of the HAVAL H6 hill descent control failure?

What Causes the Car Tire Pressure Light to Illuminate?

What does the traffic sign 30t mean?