Where is the fuel filter located on the Baojun 510?

2 Answers
QuinnFitz
07/29/25 4:47am
The fuel filter on the Baojun 510 is located at the bottom of the fuel tank and uses an OEM fuel filter. The function of the fuel filter is to remove water and impurities from the gasoline. When the engine is running, fuel is drawn by the fuel pump through the inlet pipe into the sediment bowl of the filter. As the volume increases and the flow rate decreases at this point, water and heavier impurity particles settle at the bottom of the bowl, while lighter impurities flow with the fuel toward the filter element. Clean fuel permeates through the micropores of the filter element into its interior and then exits through the fuel pipe. More details are as follows: 1. The filter element comes in two types: porous ceramic and paper. The paper filter element is made of microporous filter paper treated with resin, offering high filtration efficiency, low cost, and easy replacement, making it widely used. 2. Fuel filters are categorized into carburetor type and electronic fuel injection (EFI) type. For carbureted gasoline engines, the fuel filter is located on the inlet side of the fuel pump, operating under lower pressure and typically featuring a nylon housing. For EFI engines, the fuel filter is located on the outlet side of the fuel pump, operating under higher pressure and usually featuring a metal housing. 3. The filter element of fuel filters mostly uses filter paper, though some employ nylon cloth or polymer materials.
Was this review help?
16
1
Share
LunaFitz
08/12/25 8:28am
I've seen many Baojun 510 owners come in for repairs. The fuel filter is generally located near the fuel tank at the bottom of the vehicle. Simply put, it's under the chassis in the mid-rear section—you can spot a cylindrical canister connected to fuel lines by either crouching down or lifting the car. The position is practically designed for easy periodic inspection and replacement, but don't cut corners recklessly since handling gasoline flow involves risks; it's best left to professionals. The filter primarily traps contaminants in fuel to protect the engine and maintain fuel line efficiency. Regular maintenance is key—for instance, replacing it every 20,000 km. Neglecting this may clog fuel lines, causing hard starts or even stalling mid-drive, leading to costlier repairs. During maintenance, also check for damage to surrounding components, as rough roads can cause scrapes that shorten its lifespan.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What are the dimensions of a 17.5-meter flatbed truck?

Generally speaking, flatbed trucks of the same tonnage may not have identical cargo compartment dimensions, but they fall within a certain range. Typically, the width of the cargo compartment ranges from 2.3 to 2.4 meters, while the length usually varies between 8 to 10 meters, or even up to 12.5 meters. Introduction to flatbed trucks: A flatbed truck refers to a vehicle with a cargo platform that lacks guardrails, commonly seen in large vehicles. One type is the 17.5-meter flatbed truck, with dimensions as follows: the cargo platform length is 17.5 meters, and the width can be 2.6 meters, 2.8 meters, or 3 meters, often featuring a high-low platform design. Flatbed trucks are a common choice for road transportation due to their convenience in loading and unloading large, heavy cargo. Compared to other vehicle types of the same specifications, they can carry more goods, making them highly favored by transport companies. Classification of flatbed trucks: In the transportation vehicle category, flatbed trucks are generally divided into two types: standard flatbeds and high-low flatbeds. Standard flatbeds typically range from 4 to 13 meters in length, while vehicles longer than 13 meters are mostly high-low flatbeds.
14
4
Share

How to Remove the Rear Seat of a Corolla?

Reach into the junction between the seat base and the backrest to feel for a latch. Press it slightly inward and lift upward to remove one side. Repeat the same method on the other side to detach the seat cushion. Related instructions are as follows: 1. Generally, installing seat covers does not require removing the backrest. Simply recline the seat and remove the headrest for installation. If backrest removal is necessary, there are three fixing screws at the very bottom of the backrest, located near both sides and the center. Use tools to remove the locks, being careful not to loosen the seat belt screws. After removing the screws, pull the backrest upward with force as it is secured by three hooks. 2. When reinstalling the backrest, position it from top to bottom, securing both sides first before aligning the center. For the base, push it firmly inward, then manually check if it aligns with the clips. Once aligned, press down firmly to secure the seat cushion in place.
3
2
Share

How to Use a Fallen-off ETC?

ETC needs to be reinstalled and reactivated if it falls off. The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. The red light will briefly turn on, and the OLED screen will display "Tag Invalid" and "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield. The chip should be inserted into the OBU device. Method to activate the ETC device: Insert and remove the ETC card twice until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing the card twice without attaching the electronic tag, it is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone’s Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag). Navigate to the device activation interface. Click on "Device Connection" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle’s front to complete the activation.
1
3
Share

Does the Santana have an anti-collision beam installed?

The Santana is only equipped with a front anti-collision beam, without a rear anti-collision beam. Santana is an automobile brand produced by Shanghai Volkswagen. Taking the Santana 2021 1.5L Automatic Comfort Edition as an example: its body dimensions are 4475mm in length, 1706mm in width, 1469mm in height, with a wheelbase of 2603mm. The Santana is powered by a 1.5L 112 horsepower L4 naturally aspirated multi-point fuel injection engine paired with a 6-speed automatic transmission, delivering a maximum power of 82 kW, a maximum torque of 145 N·m, with the maximum power achieved at 6100 rpm and the maximum torque at 4000 rpm.
17
3
Share

What is the function of the engine start-stop technology?

The function of the engine start-stop technology is to save fuel and reduce emissions. Below is the relevant introduction: 1. The engine start-stop technology refers to a system that automatically shuts off the engine when the vehicle temporarily stops during driving and restarts the engine when it needs to move forward again. The purpose is to allow the engine to automatically hibernate during brief stops to achieve fuel savings and emission reduction. 2. The working principle of the start-stop system is that when the vehicle stops moving due to congestion or at an intersection, the driver presses the brake pedal to stop and shifts to neutral. At this time, the Start-Stop system automatically detects that the engine is idling and not in gear, the wheel speed sensor of the anti-lock system shows zero, and the electronic battery sensor indicates there is enough energy for the next start. After these three conditions are met, the engine automatically stops running.
20
2
Share

How to Check the Car's Odometer?

Method to check the car's odometer: The car odometer actually consists of two meters, one is the speedometer, and the other is the odometer. The speedometer indicates the car's speed in kilometers per hour. The number before 'km' represents the total distance traveled in kilometers. Traditional speedometers are mechanical, with a typical mechanical odometer connected to a flexible shaft. Inside the flexible shaft is a steel cable, and the other end of the flexible shaft is connected to a gear in the transmission. The rotation of the gear drives the steel cable to rotate, which in turn rotates a magnet inside the odometer housing. The housing is connected to the pointer and, through a hairspring, sets the pointer at zero. The speed of the magnet's rotation causes changes in the size of the magnetic field, disrupting the balance and thus moving the pointer.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.