···
Log in / Register

Where is the fuel filler switch on the Volkswagen Bora?

4 Answers
SanJoshua
07/29/25 9:26pm

The Volkswagen Bora does not have a fuel tank cap switch. When the car is in the unlocked state, simply press down on the fuel tank cap to open it. The fuel tank cap is also locked when the car is locked. If the fuel tank cap cannot be opened, remove the liner covering the fuel tank in the trunk. The liner is usually secured by some plastic clips and can be pried open with a screwdriver. After removing the liner, you can see the locking mechanism of the car's fuel tank, which has a fuel tank cap cable. Pulling this cable will open the fuel tank cap. The Volkswagen Bora is a compact car under FAW-Volkswagen. Taking the Bora 2021 200TSI DSG Comfort Intelligent Connected Edition as an example, its body dimensions are 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. The body adopts a 4-door, 5-seater sedan structure, with a fuel tank capacity of 50 liters and a curb weight of 1320kg.

Was this review help?
19
3
Share
JacksonRose
08/15/25 8:14pm

Speaking of the fuel filler switch on the Volkswagen Bora, I also spent a long time looking for it when I first drove this car. It's actually located on the left side of the driver's seat near the floor, close to where your left foot would be. There's a small lever or button there, and a simple pull will open the fuel tank cap. The first time I went to refuel, I waited foolishly for a long time until a more experienced friend told me that the Bora's design is like this, with the switch hidden near the leg area for safety. Usually, make sure it doesn't get clogged with dust, and occasionally wipe off any oil stains to prevent it from becoming hard to pull. Also, remember to turn off the engine before refueling—don't carelessly try to open the cap with the engine running. This is a habit worth developing. Now, before I go to the gas station, I instinctively tap my foot to confirm the switch's position, saving a lot of time. If the lever becomes loose or hard to pull, it might need a spring adjustment at the shop—don't force it yourself, as you could easily damage it.

Was this review help?
6
4
Share
Expand All
LaAlexandra
10/17/25 3:46am

I remember driving my Bora all these years, and the fuel filler switch location is quite easy to remember. It's right on the floor near the driver's left foot—a small plastic lever. Just pull it, and the fuel tank cap opens. Once, the switch got a bit stuck, but I gently pushed it a few times, and it became smooth again. I'd recommend keeping water stains away from that area. Always turn off the engine before refueling—it's safer and more fuel-efficient. During regular maintenance, I casually check the gaps around that lever and clean out dust with a cotton swab to prevent clogging. For new owners figuring it out for the first time, trying a few times to locate it will help you get used to it. Bora's design is quite user-friendly—not flashy but practical. Regularly inspect the wiring to ensure stable signal transmission.

Was this review help?
1
3
Share
Expand All
Davis
11/30/25 4:29am

The fuel tank switch of the Volkswagen Bora is located on the driver's left floor area, just pull the lever or press the button to open it. When using it, don't pull too hard, a gentle tug is enough. Common issues like the switch getting stuck might be due to dust accumulation or insufficient lubrication—try cleaning it with a dry cloth. Always ensure the engine is turned off before refueling, safety first. Checking the switch position is simple; you can reach it by sitting down and extending your hand, avoiding the need to bend over. Maintenance tip: Have it checked for looseness during annual servicing to prevent bigger issues.

Was this review help?
17
0
Share
Expand All
More Forum Discussions

How to Drive Downhill in a Car Without L or M Gears?

For cars without L or M gears, the method to drive downhill is: if it's not a continuous downhill stretch of several dozen kilometers, you can simply keep the car in D gear and control the speed with the brakes. The gears in an automatic transmission car are: 1. P stands for Park, used when the car is parked; 2. R stands for Reverse; 3. N stands for Neutral, used when starting the car, parking without leaving the vehicle, or when towing; 4. D stands for Drive, used when moving forward. The method to use an automatic transmission is: 1. Press the brake and push the start button to start the engine; 2. Shift into D gear, release the handbrake, and then release the brake.
6
5
Share

What is the difference between Michelin Energy XM2 and XM2+?

The difference between Michelin Energy XM2 and XM2+ lies in their properties: Michelin Energy XM2 is specially designed for small and medium-sized sedans to adapt to Chinese road conditions, with strong, sturdy, and resilient tires; Michelin Energy XM2+ is the enhanced version of the new generation Energy series, maintaining the consistent characteristics of Energy for small and medium-sized sedans and Chinese road conditions, with a strong and sturdy tire body, short braking distance, and further enhanced wear resistance. The short braking distance of Energy tires can effectively reduce unnecessary scraping accidents, ensuring travel safety. Considering the economic practicality of tire usage, Michelin has introduced a special formula to increase the mileage of Energy tires, making them more wear-resistant.
13
5
Share

What brand is the sanlg motorcycle?

sanlg motorcycle is Sanling Motor. Taking the sanlgsl1252c as an example, it belongs to the two-wheeled motorcycle category, with body dimensions of 2040mm in length, 760mm in width, and 1090mm in height, a wheelbase of 1280mm, and a curb weight of 123kg. The sanlgsl1252c has a top speed of 90km/h and features cast aluminum wheels. Motorcycles are vehicles powered by gasoline engines, steered by handlebars to control the front wheel, and come in two or three wheels. They are lightweight, flexible, and fast, widely used for patrols, passenger and cargo transport, and also as sports equipment. Motorcycles are classified into: 1. Street bikes; 2. Road racing motorcycles; 3. Off-road motorcycles; 4. Cruisers and touring bikes.
4
2
Share

What is the reason for the wrench yellow light appearing on the Mazda CX4?

The reason for the wrench yellow light appearing on the Mazda CX4 is that the vehicle requires maintenance. The vehicle maintenance items include: 1. Changing the engine oil, oil filter, air filter, and fuel filter; 2. Inspecting the body and tires; 3. Checking the braking system; 4. Examining the condition of the chassis for any damage. Taking the 2021 Mazda CX4 as an example, its body dimensions are: length 4637mm, width 1855mm, height 1524mm. The 2021 Mazda CX4 features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 158PS, a maximum torque of 202Nm, and a maximum power of 116kW, paired with a 6-speed automatic transmission.
16
3
Share

How to reset the bulb failure warning light?

Methods to reset the bulb failure warning light: 1. Turn off the engine; 2. Use a wrench to remove the negative terminal cable of the battery; 3. Wait for 15 seconds and install the new bulb. Types of car lights: 1. Headlights: The front lighting of the car is divided into low beam and high beam; 2. Fog lights: Used in foggy conditions when visibility is poor; 3. Brake lights: Illuminate when braking, installed at the rear of the car. Steps to replace a headlight bulb: 1. Open the engine hood, locate the dust cover at the back of the headlight assembly, and unscrew it by turning it in the direction of the threads; 2. After removing the dust cover, find the bulb socket inside the headlight assembly, press the wire clip next to the socket, and remove the bulb once the clip is released; 3. Install the new bulb, reattach the dust cover, and close the engine hood.
11
2
Share

Is the CFMOTO 250SR a Horizon?

The CFMOTO 250SR is not a Horizon. The CFMOTO 250SR is equipped with a 250cc single-cylinder liquid-cooled engine, the same as the CFMOTO 250NK and the Feiying R25. It delivers a maximum horsepower of 27.9ps and a maximum torque of 22nm, with a 0-100km/h acceleration time of 7.5 seconds and a top speed of 144km/h. The seat height is 78cm, the fuel tank capacity is 12 liters, the vehicle weight is 165kg, the fuel consumption is 4 liters per 100km, and the range is 300km. The CFMOTO 250SR is equipped with: seamless shifting to reduce jerking, a rear central shock absorber, front opposed four-piston calipers, front and rear vacuum tires, front and rear LED headlights, a full-color LCD instrument panel, and a 37mm inverted front fork.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.