···
Log in / Register

Where is the fuel filler switch on the Roewe 550?

6Answers
Corbin
09/02/2025, 02:13:12 AM

The fuel filler switch on the Roewe 550 is located under the circular emblem on the rear side of the vehicle. More details about the Roewe 550 are as follows: 1. Interior: It incorporates more curves and softer treatments, creating an overall smoother and more natural feel, while the matte electroplating significantly enhances visual pleasure. The center console is slightly raised compared to the older model, bringing the control interface closer to both the driver and passengers for a more comfortable operation experience. 2. Space: After comprehensive optimization, the interior space is more concise and elegant, with increased and enlarged humanized storage compartments. 3. Handling: The TST transmission ensures smooth and responsive gear shifts, with shift intervals as low as 0.2 seconds. Combined with the use of F1 Paddle-Shift gear shift paddles, even ordinary drivers can easily achieve a professional racing driver-like handling experience. Additionally, the vehicle is equipped with Goodyear low rolling resistance silicon-infused tires, offering superior grip and further improved fuel efficiency. The rear independent Z-type suspension is retained, ensuring excellent driving stability and ride comfort.

Was this review help?
120
Share
Polly
09/14/2025, 04:13:56 AM

Every time my friends drive my Roewe 550, they can't find the fuel tank switch. Actually, the switch is right next to the left leg. Bend down and look near the left side of the driver's seat close to the sill, and you'll feel a small lever with a fuel tank symbol. Just pull it to open. The fuel filler is located at the right rear of the car. When closing it, don't forget to listen for the click to ensure it's locked properly. A reminder to everyone: make sure to turn off the engine when refueling. Once, I forgot to turn off the engine while refueling and got a good scolding from the gas station attendant. Remember, just use the 92-octane fuel as indicated by the pump label. Don't be like me, foolishly filling up with 95-octane and spending dozens more.

Was this review help?
11
Share
Expand All
DylanMarie
10/28/2025, 10:09:04 PM

This design is quite ingenious. The fuel tank release of the Roewe 550 is located below the left side of the driver's seat. Instead of searching the center console, you can simply look down to see the silver handle engraved with a prominent fuel pump icon. Importantly, remember to ensure the doors are unlocked before pulling the handle, otherwise the fuel filler flap won't open. I recall helping a colleague with this car last year - he insisted the fuel flap was broken, when actually it was just the door lock interlock feature. Also, when screwing the fuel cap back on, turn it clockwise until it stops and wait for three distinct clicks to ensure proper sealing.

Was this review help?
3
Share
Expand All
DelAdalynn
12/11/2025, 09:21:11 PM

After driving my old Roewe 550 for three years, I just learned a little-known fact: the fuel tank cap switch is actually connected to the anti-theft system. The switch is located near the left foot pedal. Remember to refuel within ten minutes after opening the fuel cap, or it will automatically lock. Last time when I was changing the air filter in the underground garage, the fuel cap suddenly locked, forcing me to call for roadside assistance. The mechanic taught me to use the mechanical key to activate the emergency switch on the fuel cap as a temporary solution. This design really needs improvement. Now I always time myself when refueling.

Was this review help?
16
Share
Expand All
DiCharlie
01/31/2026, 10:26:05 PM

Last month, I caused quite a laugh when helping my mother-in-law refuel her Roewe 550. I searched the entire center console but couldn't find the fuel door switch, only to later discover that you need to reach under the driver's seat edge to locate it. That plastic lever is hidden in the gap of the interior trim panel—you have to rely on touch to identify the raised fuel pump symbol. Note that after pulling it, the fuel filler door is on the right rear side of the car; pressing the middle of the cover will pop it open. Crucial reminder for northern owners: don't force it open when frozen in winter—use hot water to melt the ice first. Old Zhang broke the latch last year by forcing it.

Was this review help?
20
Share
Expand All
EmilyRose
04/26/2026, 03:50:02 PM

Having repaired domestic cars for a decade, the fuel tank switch design of the Roewe 550 generation is worth mentioning. The switch is located on the inner lining above the driver's left foot, requiring bending over to operate. Actually, this design by the manufacturer is for anti-theft security, with the fuel tank cap lock cylinder connected to the door lock signal wire. If you encounter a situation where the fuel tank cap won't open, don't force it; it's recommended to first unlock the entire car and try again. If it still doesn't work, inserting the key into the fuel tank cap and turning it 120 degrees clockwise can mechanically unlock it. By the way, this car has a fuel tank capacity of 62 liters, so it's best not to fill it to the point where the pump automatically stops.

Was this review help?
3
Share
Expand All
More Q&A

Can Modified Suspension Pass the Annual Inspection?

In theory, any modification to a vehicle will result in it failing the annual inspection. Therefore, modifying the suspension should logically prevent it from passing. However, in reality, as long as the modifications are not excessive, a modified suspension can pass the inspection. Article 16 of the 'Road Traffic Safety Law of the People's Republic of China' stipulates: No unit or individual may engage in the following acts: 1. Assembling motor vehicles or altering the registered structure, construction, or characteristics of motor vehicles without authorization; 2. Changing the model, engine number, frame number, or vehicle identification code of a motor vehicle; 3. Forging, altering, or using forged or altered motor vehicle registration certificates, license plates, driving licenses, inspection qualification marks, or insurance marks; 4. Using the registration certificates, license plates, driving licenses, inspection qualification marks, or insurance marks of other motor vehicles.
110
Share

What Causes High Idle Speed in an Engine?

Engine idling at high speeds is primarily caused by intake manifold leaks and excessive carbon buildup. Below is an introduction to engine idling: 1. Definition: Idling refers to maintaining the engine's stable operation at the lowest possible speed without any load. During idling, both the clutch pedal and accelerator pedal are fully released, and the transmission is in neutral. At this point, the engine only needs to overcome the frictional resistance of its internal components and the operational resistance of its accessories, without delivering any external power output. 2. Cause: High idle speed is generally due to excessive carbon deposit accumulation. Timely cleaning of the throttle body and idle speed control valve usually resolves the issue.
106
Share

Do I need to change the vehicle license when replacing the engine assembly?

Replacing the engine assembly requires changing the vehicle license. Below are the relevant details about the engine: 1. Procedure: Apply for modification procedures at the vehicle management office. The owner needs to bring their ID card, vehicle license, vehicle registration certificate, and proof of the new engine. At the vehicle management office, staff will issue an inspection application and take an imprint of the new engine number. 2. Expired annual inspection: If the vehicle license has not undergone the annual inspection by the due date, the previous year's inspection validity expires. Failure to complete the annual inspection on time means the vehicle has not passed the required annual or biennial inspection. Vehicles without a valid annual inspection are not allowed to drive on public roads, and driving without inspection will result in penalties, hence the need for replacement.
106
Share

How to Deal with Mice in the Engine Compartment?

Place some unpleasant-smelling items in the engine compartment to repel mice. Here are specific methods to drive away mice: 1. Put some mothballs in the corners around the car: The smell released by mothballs can help repel mice, as mice dislike the odor of mothballs and will leave on their own after smelling it. 2. Purchase a bottle of rodent repellent: Spray the repellent around the vehicle's tires and on the ground beneath the engine. Mice will flee upon detecting the scent of the repellent. 3. Keep the car interior clean: Always close the door when entering or exiting the car, and avoid leaving snacks such as melon seeds, peanuts, or potato chips—foods that mice love—inside the vehicle. When parking, try to stay away from areas frequented by mice, such as garbage bins.
108
Share

What is the difference between 'application in progress' and 'acceptance in progress' for Subject 3?

There are the following differences between 'application in progress' and 'acceptance in progress' for Subject 3: 1. Application in progress: This means the application has not yet been scheduled. Generally, the review time for a Subject 3 appointment takes 5-10 days. If you are in a first-tier city where there are many applicants, the time may be extended, with notifications typically sent 3-5 days before the exam at the latest. 2. Acceptance in progress: This indicates that the appointment has been scheduled and is under review, awaiting results. Successful appointments will receive an SMS notification, and if you receive the message, you can go for the exam on the same day. Additionally, you can directly call the local vehicle management office to confirm whether the exam appointment was successfully scheduled.
118
Share

The Difference Between Short Press and Long Press for Car One-Button Start

Here is the relevant introduction to the short press and long press for car one-button start: 1. Difference: The short press type is a computer switch for one-button start; the long press type does not have additional delayed power-off electronic equipment. 2. Operation: The short press type only requires a light press, and the computer will automatically delay shutting off the start power until the vehicle starts. The long press type requires a long press. 3. Pros and Cons: Automatic door unlocking: When the owner approaches the vehicle within about 3 meters, the door lock will automatically open, disabling the anti-theft system. When the owner leaves the vehicle, the door lock will automatically lock and enter the anti-theft state. When the owner enters the vehicle, just press the start button to use the vehicle without a key. If the position sensor fails or the ignition matching fails, the ignition switch keyhole is required. Generally, low-grade or basic modifications will not retain the keyhole.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.