Where is the fuel filler switch on the Mercedes S500?

2 Answers
MacIsla
09/02/25 7:05am
The fuel filler switch on the Mercedes S500 is located next to the fuel tank cap on the right side. Since it is an electromagnetic lock, you need to manually trigger it to open the fuel tank cap. Precautions for refueling: Pay attention to the gasoline octane rating. The gasoline octane rating refers to the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. The higher the octane rating, the stronger the anti-knock performance. Vehicles with high engine compression ratios require higher-octane gasoline. Mixing different octane ratings is not recommended: Owners should still follow the instructions in the car manual or the labels on the fuel tank cap to correctly add gasoline. Due to compression ratio reasons, vehicles requiring high-octane gasoline need gasoline with better anti-knock performance. Using low-octane gasoline will cause engine knocking. Even if a vehicle designed for low-octane gasoline is filled with high-octane gasoline, it will not experience knocking, but excessive carbon deposits may occur due to insufficient cylinder temperature and pressure.
Was this review help?
11
2
Share
Lindsey
09/15/25 2:20am
I've been driving this car for a long time. The fuel filler switch in the Mercedes-Benz S500 is thoughtfully designed, located on the inner floor near the driver's seat, close to the left foot. It's usually a plastic button or a press-type lever. When operating, just stop the engine and press gently to pop open the fuel tank cap. The placement is excellent—drivers don't need to fumble around; they can control it right by their feet, making it both safe and convenient. Mercedes-Benz cars often place it here because it prevents accidental activation, avoiding unintended opening while driving. If you can't find it, it might also be on the door panel, but most often it's on the floor—just look for that small protruding button. Remember to close the cap tightly when refueling, otherwise the indicator light will come on.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Where is the reset button located on the SAIC Maxus G50?

SAIC Maxus G50 reset button is located in the multifunction area. Here is a detailed introduction about the SAIC Maxus G50: 1. Overview: The SAIC Maxus G50 is equipped with multiple powertrains including traditional gasoline engines, pure electric, plug-in hybrid, and fuel cell power. In terms of power, it comes with 1.3T/1.5T engines. The SAIC Maxus G50 features a dashboard with strong three-dimensional lines, a multifunction steering wheel style, and multiple storage spaces. 2. Others: The SAIC Maxus G50 offers a "four-screen linkage" function, which includes a 12.3-inch central control screen, a 7-inch LCD instrument screen, a C-HUD head-up display, and mobile phone screen for information linkage. Additionally, the G50 is equipped with the Banma intelligent vehicle system jointly developed by SAIC and Alibaba, which includes native AutoNavi maps for intelligent flexible navigation, OTA online update function, intelligent scene voice recognition, and other features.
8
0
Share

What is the reason for the failure to start when checking the anti-lock braking system?

Failure to start may be due to the following reasons: fuel quality issues, lack of antifreeze, or excessive carbon buildup in the vehicle, which can also prevent the vehicle from starting. Below is an introduction to the anti-lock braking system: 1. Function of the anti-lock braking system: The anti-lock braking system can improve the safety performance of the vehicle and enhance the safety factor during emergency braking. When the vehicle brakes suddenly, it is easy for the wheels to lock up. After locking, the friction between the wheels and the ground decreases. If the front wheels lock up, the vehicle's direction cannot be controlled, and if the rear wheels lock up, it is extremely prone to skidding. The function of ABS is to continuously adjust the pressure of the brake caliper to prevent wheel lockup. 2. Composition of the anti-lock braking system: The anti-lock braking system mainly consists of a hydraulic braking system, an ABS control unit, and wheel speed sensors. The ABS determines whether a wheel is about to lock up based on signals from each wheel speed sensor. If a wheel is about to lock up, the hydraulic control adjusts the braking force of that wheel to prevent lockup. This action occurs very quickly, averaging 60-120 times per second, ensuring that the braking state remains at the optimal point.
16
3
Share

Why Does the Highlander Retain Its Value So Well?

The core reason for the Highlander's successful value retention actually lies in its stability. Here is the detailed introduction: Starting from the second generation, the Highlander entered the Chinese market. At that time, it quickly secured a place by leveraging its strong advantages, and its reputation continued to improve over time. Over the years, there have been hardly any major issues exposed. Therefore, with a solid reputation and market presence, it naturally thrives. The model adopts a 'governing by doing nothing' policy, making minor upgrades and facelifts based on market feedback, staying unchanged to cope with all changes. There are no perfect vehicles in the market, but the Highlander manages to cover a bit of everything consumers demand, offering balanced performance, which leads to its success.
6
1
Share

How to Repair Black Plastic Bumpers on SUVs?

It depends on the extent of the damage. For minor scratches, waxing can be used for treatment. If there is a break and the broken part is still present, plastic welding can be employed for repair. Apply putty to the welded area, smooth it through sanding for aesthetic improvement, and finally complete the repair with painting. Below are the functions of the bumper: 1. From a safety perspective: It serves as a buffer during low-speed collisions, protecting the front and rear body of the car. It also provides some protection for pedestrians in accidents involving them. 2. From an appearance perspective: It has decorative value, being an important component in styling the car's exterior. 3. Aerodynamic role: The car bumper also plays a certain aerodynamic role. Additionally, to reduce injuries to passengers in side-impact collisions, door bumpers are usually installed in cars to enhance the door's impact resistance.
19
5
Share

What to Do If the Car Burns Engine Oil?

After the vehicle reaches normal operating temperature, if blue smoke is still coming out of the exhaust pipe, it needs to be addressed by replacing the piston rings. Aged or damaged valve seals are also a significant factor causing the car to burn engine oil, and new valve seals need to be replaced.
3
4
Share

What to Do When the Car Body Always Tilts as a Beginner?

When reversing, you can judge whether the car body is aligned by looking at the rearview mirrors, following the principle of 'steering towards the side that is wider.' If moving forward and noticing the car body tilting to one side, steer the wheel in the opposite direction, adjusting the amount you turn the wheel accordingly.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.