Where is the fuel filler switch on the Lavida?

2 Answers
SanCarmen
07/29/25 9:50am
The Lavida does not have a dedicated fuel filler switch. The fuel tank cap is linked to the central locking system. After unlocking the central lock, simply press the fuel tank cap to open it. The new Lavida is equipped with three engine options: a 1.2L turbocharged engine, a 1.4L turbocharged engine, and a 1.5L naturally aspirated engine. The 1.2L turbocharged engine delivers a maximum power of 85kW and a maximum torque of 200Nm, with peak power achieved at 5,000 rpm and peak torque between 2,000 to 3,500 rpm. The 1.4L turbocharged engine produces a maximum power of 110kW and a maximum torque of 250Nm, with peak power at 5,000 rpm and peak torque between 1,750 to 3,000 rpm. The 1.5L naturally aspirated engine generates a maximum power of 83kW and a maximum torque of 145Nm, with peak power at 6,000 rpm and peak torque at 3,900 rpm.
Was this review help?
7
2
Share
LeHailey
08/13/25 11:46am
I've driven a Volkswagen Lavida for several years, and the fuel filler release is conveniently located on the inner side of the driver's door. Just look for the button with a small fuel icon or key symbol, press it gently, and the fuel tank cap pops open. The design is quite thoughtful, saving the hassle of fumbling for keys. When I drove other cars before, I had to search around, but the Lavida's consistent positioning eliminates confusion. Always remember to turn off the engine when refueling—safety is paramount. If the button doesn't respond, it might be a blown fuse or low battery; a quick self-check can help. Maintaining at least half a tank of fuel extends the pump's lifespan, so avoid waiting until the empty light comes on before rushing to find a gas station. Developing this habit makes things easier and saves money too.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

How many liters of engine oil are needed for a BMW X5 oil change?

BMW X5 requires 6.5 liters of engine oil. Methods for selecting engine oil: When choosing engine oil, three main factors should be considered: API grade, viscosity grade, and base oil quality. For motorcycles like the Xi Shark, an API grade of SF or above is sufficient. The viscosity grade can be 10W-30 or 10W-40, and the base oil quality can be mineral oil, semi-synthetic, or fully synthetic oil depending on the situation. The specific oil change model can be referred to in the vehicle's user manual. Methods for checking engine oil level: The engine oil level can be checked using the dipstick in the oil pan. When the engine is cold, pull out the dipstick, wipe it clean, reinsert it, and then pull it out again. As long as the oil level is between the MIN and MAX marks, it is acceptable.
6
1
Share

How many meters should the warning triangle be placed behind the car?

The warning triangle should be placed 50-100 meters behind the car. Conventional road setup: According to the "Road Traffic Safety Law of the People's Republic of China", on conventional roads, when a breakdown or traffic accident occurs, the warning triangle should be placed 50 to 100 meters behind the vehicle; on highways, the warning sign should be placed more than 150 meters behind the vehicle, and in rainy or foggy weather, the distance should be increased to 200 meters. Correct placement method for warning triangle: The correct way to use the warning triangle is to place it at the proper distance. Some car owners have the awareness to set up the warning triangle when an accident occurs, but the placement distance is almost equivalent to not placing it at all. Some place it directly less than 10 meters behind the car. If the warning triangle is placed too close to the accident site, it is practically the same as not placing it at all.
3
5
Share

What Causes Gear Shift Jerkiness in Motorcycles?

The sensation of jerkiness during gear shifts primarily stems from two aspects. Cause One: Hardware issues. Solution: Excessive clearance or damage to the cushion block, or a chain that is too long or has excessive clearance. These hardware problems can create intervals in engine power transmission, causing delayed transfer and resulting in abruptness and jerkiness. If hardware issues are confirmed, promptly replace the relevant components, as this not only affects comfort but also relates to safety. Cause Two: Improper operation by the rider. Solution: Holding the clutch lever for too long. When pulling the clutch lever to shift gears, the motorcycle is in a coasting deceleration state. If the clutch lever is not released promptly after shifting, the gear is higher while the speed decreases. Releasing the clutch lever at this point causes a mismatch between the engine crankshaft speed and the actual speed.
5
2
Share

How to Turn Off the Rear Wiper of the Car?

The method to turn off the rear wiper of the car: There is a switch on the car's wiper lever; you can change different gears by toggling it. The default state of the knob is at the "O" position at the bottom, which is the gear to turn off the rear wiper. Adjusting the knob to the middle position turns on the rear wiper. The wiper is a tool installed on the front windshield of motor vehicles to simply clean rainwater and other debris that may obstruct vision. The power source of the wiper comes from an electric motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque. Its output shaft drives a four-bar linkage mechanism, which converts continuous rotational motion into a left-right oscillating motion.
18
1
Share

What are the maintenance items for the Bora at 20,000 kilometers?

The maintenance items for the Bora at 20,000 kilometers generally include replacing the engine oil, oil filter, air filter, cabin air filter, as well as components such as coolant and spark plugs. Vehicle maintenance cycle: The maintenance cycle for motor vehicles is typically at 5,000 kilometers or 10,000 kilometers. Different brands of motor vehicles have varying maintenance cycles. When performing vehicle maintenance, it is necessary to refer to the maintenance items listed in the owner's manual and the specific usage conditions of the vehicle to determine the relevant maintenance tasks. Importance of vehicle maintenance: Maintaining a car ensures that the vehicle remains in optimal performance condition, ready for use at any time without worrying about technical issues. It effectively improves the vehicle's efficiency, reduces fuel consumption, and minimizes wear on parts and tires. For example, regular maintenance of the engine prevents an increase in fuel consumption and ensures smoother operation. Additionally, maintenance enhances driving safety by preventing sudden malfunctions during travel, thereby safeguarding personal safety.
3
4
Share

Which Vehicle Management Office Handles Motorcycle Registration in Xi'an?

Motorcycle registration can be processed at the Chang'an Branch of the Vehicle Management Office or the vehicle management offices of the traffic police brigades in each district and county. 1. Services Available: Starting from April 20, 2020, applicants with Xi'an household registration or a residence permit from any location in the city can apply for initial motorcycle driver's licenses or additional driving permissions at the Chang'an Branch of the Vehicle Management Office or the vehicle management offices of the traffic police brigades in each district and county. 2. Obtaining a License: The process for obtaining a motorcycle license in Xi'an has been simplified. Simply search for the official WeChat account "Xi'an Local Treasure," follow it, and reply with "motorcycle" to view the methods, addresses, required materials, and procedures for obtaining a motorcycle license in Xi'an.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.