Where is the fuel filler switch located on a Geely?

2 Answers
AnnieRose
07/23/25 8:31pm
Geely fuel filler switch is located below the left side of the driver's seat. Fuel filling amount: Generally, filling until the nozzle automatically stops is sufficient. There's no need to manually add extra fuel to round up the amount. After refueling, remember to tighten the fuel cap until you hear a click sound before leaving. Checking the fuel gauge: Before driving, check the fuel gauge. Calculate whether you need to refuel during the trip based on the distance of your journey and the fuel gauge reading. It's advisable to refuel in advance rather than waiting until the fuel warning light comes on. The fuel pump is located inside the fuel tank and operates at high temperatures during continuous use. Being submerged in fuel helps to cool it effectively. When the fuel warning light comes on, it indicates that the fuel level has dropped below the fuel pump. Consistently waiting until the light comes on to refuel can shorten the fuel pump's lifespan, and having too little fuel in the tank may even lead to fuel pump burnout. Best time to refuel: It's better to refuel in the morning or evening, avoiding the midday when the sun is strong and temperatures are high. Since gasoline is sold by volume rather than weight, and it expands with heat and contracts with cold, refueling in the morning or evening allows you to get more mass for the same volume of gasoline, resulting in savings.
Was this review help?
10
4
Share
Colin
08/10/25 6:31pm
When I used to drive a Geely Emgrand, the fuel filler release was conveniently located on the left side near the door by the driver's seat. There was a small lever on the floor marked with a fuel pump icon—just a quick pull would pop open the fuel tank cap, making it super hassle-free. The design was really thoughtful, and you had to turn off the engine before operating it—safety first. If you're new to the car and can't find it at first, don't panic—just feel around that corner a few times, and you'll get used to it quickly. I think this layout prevents accidental activation and also reduces dust buildup. Nowadays, newer Geely models might have upgraded to a button on the lower left of the dashboard, but the base versions still use the lever design. For daily driving, having it in a fixed, easy-to-find spot saves time and boosts efficiency—no need to get out of the car to refuel, which is perfect for busy days.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What details can reveal a flood-damaged car?

For a flood-damaged car, pay attention to the following details: 1. Carefully inspect the interior and flooring: Mismatched or loose components likely indicate replacements, while discolored, stained, or faded materials often show water damage signs. 2. Repeatedly test electrical systems: Check functionality of interior/exterior lights, windows, door locks, radio, cigarette lighter, heater, and air conditioning. 3. Examine hidden compartments: Inspect glove compartments, dashboard areas, under seats for water damage indicators like trapped silt, mud stains, or rust in hard-to-clean areas. 4. Smell test: Be cautious of overpowering air fresheners - dealers often use strong fragrances to mask musty odors.
7
4
Share

How often should a family car's vehicle license be inspected?

According to the relevant regulations on motor vehicle annual inspections, small and micro non-operating passenger vehicles are inspected every 6 years; after exceeding 6 years, they are inspected annually; after exceeding 15 years, they are inspected every six months. Since family cars fall under the category of non-operating passenger vehicles, their inspection cycle is every 6 years. During this period, you only need to apply for the annual inspection sticker every two years at the vehicle management office or online. It is only in the 6th year that an on-site inspection is required. Below is supplementary information on the documents required for car annual inspections: 1. "Motor Vehicle Inspection Sticker Application Form" (this does not need to be brought along as it is provided on-site for direct completion). 2. Motor vehicle license. 3. Compulsory traffic insurance certificate. 4. Vehicle and vessel tax payment or tax exemption certificate, which is usually purchased together with compulsory traffic insurance and can be found in the compulsory insurance policy. 5. Owner's ID card; if someone else handles it on behalf of the owner, the representative must bring their own ID card.
18
3
Share

Can the Annual Inspection Be Handled Online at 12123?

Annual inspections can be processed online via the 12123 platform. Below is an introduction to motor vehicle annual inspections: 1. Engine: Check whether the engine, chassis, body, and attached equipment are clean, complete, and functional; whether the paint surface is uniform and aesthetically pleasing; whether major assemblies have been replaced; and whether they match the initial inspection records. 2. Braking Performance: Verify that the vehicle's braking performance, steering control, lights, exhaust, and other safety features comply with the "Technical Requirements for Safe Operation of Motor Vehicles." 3. Modifications: Check whether the vehicle has undergone modifications, alterations, or transformations; whether the driving license, license plate, and all vehicle file registrations match the actual vehicle condition; whether there have been any changes; and whether approval and modification procedures have been completed. 4. License Plates: Inspect the license plates, driving license, and enlarged license plate markings on the vehicle for damage, alterations, illegible text, or if replacement is necessary.
6
5
Share

How to Resolve Engine Speed Limitation?

Engine speed limitation requires the use of specialized software to access and adjust the Engine Control Module (ECM). Below is more information about vehicle speed limiters: 1. What is a vehicle speed limiter: Vehicle speed limiters utilize microcomputer program control to effectively restrict the maximum driving speed of a vehicle without affecting its original power. The main types of speed limiters available in the market are: mechanical throttle (cable throttle) limiters and electronic throttle limiters. 2. Features: When the preset speed is reached, the maximum speed is already set. Normal driving is possible within this speed limit. If the vehicle exceeds the preset speed (e.g., set at 80 km/h), it will automatically trigger an alarm. 3. Functions: Remote management, data recording and analysis, automatic alarm, speed positioning, reminder functions, etc.
12
0
Share

What is the rubber strip on the car door called?

The rubber strip on the car door is called the door seal. It is a product that seals the door, making it harder to open, and serves functions such as shock absorption, waterproofing, sound insulation, heat insulation, dustproofing, and fixing. It is mainly applied to the door frame, side windows, front and rear windshields, engine hood, and trunk lid, providing waterproofing, dustproofing, sound insulation, temperature insulation, shock absorption, and decoration. More details are as follows: The door sealing system mainly targets two areas: 1. Door opening area: It primarily relies on an inner door seal strip installed around the side panel door opening flange or an outer door seal strip installed around the door to seal the entire door opening. Some models have both seal strips, while others use only one, depending on performance requirements or cost targets. 2. Window area: This mainly relies on the glass guide channel seal strip on the window frame and the inner and outer window sill seal strips to achieve sealing. They also ensure the smooth up-and-down movement of the window glass. Typically, the glass guide channel seal strip has the highest requirements and the most complex structure in the vehicle sealing system.
11
4
Share

Where Does Water Enter a Flooded Sedan?

Water can enter a car through the sunroof, doors, or chassis. Here are the details: 1. Vehicle chassis: The chassis typically has drainage holes designed to expel water after wading. If these holes get clogged with debris or their rubber seals deteriorate/detach, water infiltration becomes likely. 2. Precautions: Never attempt to restart the engine immediately after hydro-lock occurs. Since the exact cause of stalling can't be instantly determined, reckless ignition attempts may inflict unpredictable severe damage to the vehicle.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.