Where is the fuel filler switch for Roewe?

1 Answers
McPresley
07/29/25 9:15pm
The fuel tank cap switch for Roewe is located below the dashboard in the driver's cabin. Pull this switch to open the fuel tank cap. The icon for the fuel tank cap switch is the symbol of a gas station fueling. Here is more information: 1. Fuel filler cap: Turn the fuel filler cap counterclockwise slowly to release the pressure in the fuel tank before opening the filler cap. After refueling, reinstall the filler cap and tighten it until you hear three 'clicks'. 2. If the vehicle is parked in direct sunlight or a high-temperature environment, do not fill the fuel tank completely, as fuel expansion may cause overflow. The filler pipe is designed to accommodate sharp and long fuel nozzles. There is a cover plate at the neck of the filler pipe. Before refueling, fully insert the fuel nozzle to completely open this cover plate. 3. High fuel tank pressure is usually caused by a blocked fuel cap regulator valve or a blocked carbon canister vent, which can lead to excessive pressure inside the fuel tank. The pressure difference makes the fuel cap difficult to unscrew. You can use a vacuum pressure pump to check whether the opening pressure and vacuum control of the fuel cap are within the normal range.
Was this review help?
16
5
Share
More Forum Discussions

Can you apply for a driver's license under the age of 18?

Individuals under the age of eighteen are not eligible to obtain a driver's license. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" of the People's Republic of China, the minimum age requirement is 18 years old. Article 13 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" stipulates that applicants for a motor vehicle driving license must meet the following requirements: (1) Age conditions: 1. Applicants for small cars, small automatic transmission cars, or light motorcycles must be at least 18 years old and under 70 years old. 2. Applicants for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be at least 18 years old and under 60 years old. 3. Applicants for urban buses, medium-sized buses, large trucks, trolleybuses, or trams must be at least 21 years old and under 50 years old. 4. Applicants for medium-sized buses must be at least 21 years old and under 50 years old. 5. Applicants for tractor-trailers must be at least 24 years old and under 50 years old. 6. Applicants for large buses must be at least 26 years old and under 50 years old. 7. Students receiving full-time driving vocational education who apply for large buses or tractor-trailers must be at least 20 years old and under 50 years old.
17
5
Share

What happens if too much engine oil is added?

Effects of adding too much engine oil to a car: 1. Excessive engine oil creates greater resistance to the movement of internal engine components, leading to poor power responsiveness, reduced power output, louder engine noise, and a certain degree of increased fuel consumption. 2. Too much engine oil can enter the combustion chamber, increasing carbon deposits inside the chamber and causing oil burning. This results in blue smoke from the exhaust pipe. Incomplete oil combustion leads to exhaust gases being emitted from the pipe, causing the vehicle to exceed emission standards. 3. Excessive engine oil raises oil pressure, which can damage oil seals, reduce their lifespan, and potentially cause oil leaks.
17
5
Share

How to Properly Start and Park an Automatic Transmission Car?

Starting Techniques and Correct Steps for Automatic Transmission Cars: 1. After the driver sits in the driver's seat, there is no need to press the brake pedal. Simply press the start button once to turn on the ACC light, then press it again to initiate the vehicle's self-check. 2. Ensure the handbrake is engaged and the gear is in P (Park) or Neutral. Press the brake pedal and press the start button once more to ignite and start the engine. 3. Release the foot brake. You may choose to warm up the car for 1-3 minutes; specifically, check the water temperature gauge on the dashboard. When the pointer reaches 90 degrees, it indicates the warm-up is complete. 4. Press the foot brake again, shift to D (Drive) gear, and release the handbrake (for electronic handbrakes, simply press the button briefly). 5. Observe the road conditions, paying attention to vehicles approaching from behind and pedestrians on the side. You may turn on the turn signal when starting, slowly release the foot brake, apply some throttle, and the start is complete. Parking Techniques and Correct Steps for Automatic Transmission Cars: 1. Release the throttle and press the brake pedal to bring the vehicle to a smooth stop. 2. Shift the gear from D (Drive) to N (Neutral). 3. Engage the handbrake (for electronic handbrakes, pull it upwards). 4. Release the foot brake but do not turn off the power (this is to confirm that the car can come to a complete stop under the handbrake's effect, preventing the P gear from locking). 5. Continue pressing the foot brake and shift the gear from N (Neutral) to P (Park). 6. Release the foot brake, press the start button to turn off the power, and the parking is complete.
7
5
Share

Why is there no air coming out in the heating mode of the air conditioner?

The main common faults that cause no air output in the car air conditioner's heating mode are: blower failure, air filter failure, and control system failure. The following is a detailed explanation: 1. The blower is the core component that determines whether the air conditioner outputs air. If it fails, there will definitely be no air output. The causes of blower failure may include overheating damage to the internal coils or capacitor failure. Car owners can check for faults by turning the air conditioner's fan speed and air volume to the maximum and listening for the blower's sound. 2. A clogged air filter is the most common cause of no air output. Outside air passes through the air filter before entering the car, and it also absorbs many airborne particles, making it prone to clogging. The air filter can be removed, and if it is not too dirty, the debris can be cleared with an air gun before reinstalling it to check the air outlet. 3. If the above faults are not found, then the problem lies in the car air conditioner's control system. The air door, control switch, or car air conditioner computer could be the cause of the failure. It is recommended to visit a repair shop as soon as possible for inspection and repair to avoid future troubles.
9
1
Share

What is the Difference Between Minor and Major Maintenance?

Minor maintenance generally refers to the routine maintenance tasks performed at the intervals or mileage specified by the manufacturer to ensure vehicle performance. It mainly includes changing the engine oil and oil filter. Major maintenance, on the other hand, involves changing the engine oil, oil filter, air filter, and fuel filter as part of the routine maintenance schedule set by the manufacturer. Minor maintenance includes the following items: 1. Engine oil: This is the lubricant for engine operation. It lubricates, cleans, cools, seals, and reduces friction in the engine. It plays a crucial role in minimizing wear on engine components and extending their service life. 2. Oil filter: This component filters the engine oil. Engine oil contains certain amounts of gum, impurities, moisture, and additives. During engine operation, metal particles from component friction, airborne impurities, and oil oxidation products are all filtered by the oil filter. If the oil is not filtered before circulating through the system, it can adversely affect engine performance and longevity. Major maintenance includes the following items in addition to changing the engine oil and oil filter: 1. Air filter: The engine inhales a large amount of air during operation. If the air is not filtered, dust in the air can accelerate wear on the piston assembly and cylinder. Larger particles entering between the piston and cylinder can even cause severe "cylinder scoring." The air filter's role is to remove dust and particles from the air, ensuring that clean and sufficient air enters the cylinder. 2. Fuel filter: The fuel filter provides clean fuel to the engine by filtering out moisture and impurities from the gasoline. This optimizes engine performance and offers the best protection for the engine. 3. Typically, during vehicle maintenance, technicians will perform additional inspections based on the vehicle's condition and may include other maintenance tasks, such as inspection and cleaning of engine-related systems, tire alignment checks, and inspection of various fastening components.
4
4
Share

Is Car Insurance Valid Without License Plates?

Car insurance remains valid even without license plates, as there is no direct correlation between license plates and insurance validity. Here are the detailed explanations: 1. Currently, insurance policies take effect from midnight on the day following the policyholder's purchase. 2. However, it's important to note that while the absence of license plates doesn't affect insurance validity, it directly impacts insurance claims. 3. According to relevant regulations, insured motor vehicles will not be eligible for insurance claims under any of the following circumstances: (1) The insured vehicle's registration certificate or license plates are revoked at the time of the insured incident, or the vehicle fails to undergo mandatory inspection or fails the inspection; (2) During periods when the vehicle is seized, confiscated, impounded, or requisitioned by the government; (3) During competitions, tests, or when undergoing maintenance, servicing, or modifications at commercial establishments; (4) When the insured party or permitted driver intentionally or through gross negligence allows the insured vehicle to be used for criminal activities.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.