Where is the fuel filler port on the Mercedes-Benz V-Class?

2 Answers
VonLouis
08/28/25 4:21am
Mercedes-Benz V-Class fuel filler port is located at the rear side of the back door. Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained through distillation or cracking of petroleum, primarily used as fuel for spark-ignited internal combustion engines. Method to open the fuel tank cap: The switch for the Mercedes-Benz fuel filler port is its fuel tank cap. When the central locking system of the Mercedes vehicle is unlocked, pressing the fuel tank cap once will open it. Similarly, to close it, press it again. However, to lock the fuel tank cap, simply engage the central locking system of the Mercedes. Design principles: The fuel tank must have sufficient capacity. On one hand, it should meet heat dissipation requirements as much as possible. On the other hand, it should be able to accommodate all the working fluid in the system when the hydraulic system is not operating, while maintaining an appropriate fluid level during operation.
Was this review help?
16
0
Share
IrisAnn
09/10/25 2:49am
I've been driving a Mercedes-Benz V for many years, and the fuel filler is designed on the right rear side, specifically on the fender door above the right rear wheel. When you pull into a gas station, just park with the fuel filler facing outward for the attendant's convenience. Most Mercedes-Benz V-series models are diesel-powered, so don't mistake the fuel type, or it could damage the engine. Regular maintenance should include checking the sealing ring to prevent oil leaks, especially in rainy weather. The location is quite user-friendly, with a button on the driver's seat to open it—just remember to unlock it first. If you can't find it, refer to the owner's manual, which has clear illustrations. Safety first: always turn off the engine and refrain from smoking while refueling to prevent accidents.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What are the regulations for upgrading from a B2 to an A2 driver's license?

To upgrade from a B2 to an A2 driver's license, the applicant must have held the B2 license for at least three years, with no record of accumulating 12 penalty points within a year, meet the specified age requirements, and pass the relevant examinations. The specific conditions are as follows: 1. Age requirement: Applicants for an A2 license must be between 24 and 50 years old. If you are about to turn 50 and still wish to apply for a tractor driver's license, you must obtain it before turning 50. 2. Vision requirement: Uncorrected or corrected visual acuity must reach at least 5.0 on the logarithmic visual acuity chart. 3. Driving experience requirement: Hold a B1 or B2 license for at least three years with no full-point records in the last two cycles, or hold an A1 license for at least one year with no full-point records in the last cycle, and no record of being primarily responsible for a fatal accident involving the test vehicle.
15
0
Share

Is the maintenance provided by 4S stores free?

If it is a free maintenance item clearly listed as a gift by the 4S store, no payment is required. However, after maintenance is performed at the 4S store, the after-sales service usually recommends that the owner perform other non-free items. The following is an introduction to maintenance: 1. Car maintenance: Maintenance is very important for cars. Maintenance involves replacing some fluids and wear parts in the car. The fluids in the car include engine oil, transmission oil, coolant, power steering oil, and brake fluid. 2. Wear parts: The wear parts in the car include various filters, belts, wipers, tires, brake pads, brake discs, batteries, etc. In daily car use, engine oil is called the blood of the engine. Engine oil plays the roles of lubrication, cleaning, sealing, heat dissipation, buffering, and rust prevention in the engine, so engine oil is very important for the engine. Every time the engine oil is changed, the oil filter should be replaced together.
14
4
Share

What Causes the Car Alarm to Keep Sounding After the Engine is Turned Off?

Introduction to the reasons why the car alarm keeps sounding: 1. The alarm is too sensitive, so even slight movements around the car can trigger it continuously. In this case, simply adjusting the sensitivity will suffice. 2. A faulty door switch can also cause the alarm to sound. This requires repair at a service center. 3. The sensitivity of the anti-theft sensor is too high, but this can be adjusted. There is a sensitivity adjustment knob on the vibration sensor of the anti-theft device; a slight adjustment will fix the issue. Below is some related information about car alarms: 1. A car alarm is an alarm device installed in a vehicle: If someone hits, impacts, or moves the car, the sensor sends a signal to the controller, indicating the intensity of the vibration. Depending on the vibration intensity, the controller will emit a warning sound or activate a full alarm. This is meant to deter thieves and alert the owner. 2. System composition: The most basic car alarm system generally consists of one or more sensors connected to an alarm. The simplest alarm system involves installing a switch on the driver's side door and connecting the wires. If someone opens the door, the alarm will sound. Installing such a car alarm system requires a switch, some wires, and an alarm.
9
0
Share

What is the recommended tire pressure in summer?

In summer, the normal tire pressure should be between 2.2-2.4 bar. As the temperature and road surface temperature rise, the tire pressure can easily increase during high-speed or long-distance driving. Excessive tire pressure may lead to brake failure and potential tire blowouts when encountering road protrusions or depressions. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts.
17
1
Share

Why don't car seats come with lumbar support?

This is an individual need, and it requires self-installation. Car lumbar support is a type of car pillow, serving both as a car accessory and a health product. It effectively alleviates fatigue and discomfort in the lower back caused by prolonged driving, providing significant relief for lumbar pain. Recommendations for choosing car lumbar support: 1. The inner cores of lumbar cushions on the market are generally divided into several categories: down, sponge, cotton, PP cotton, latex, and other materials. Different materials offer varying experiences. It is recommended that car owners choose products with good elasticity and comfortable texture. 2. The shape of the lumbar support should also vary from person to person: the elasticity and feel should be suitable when placed on the seat. A properly shaped lumbar support with the right softness, thickness, and elasticity, when positioned correctly and symmetrically on the seat, can relieve most of the pressure on the lower back. 3. For car owners seeking greater comfort: you can opt for cushions with a massage effect. The advantage of such cushions is similar to that of a massager—when leaned against, the built-in vibrators provide a massage effect, reducing muscle soreness in the lower back.
20
5
Share

How to Operate an Electronic Gear Shift in a Car?

Electronic gear shifts can generally be categorized into three types of operation methods: 1. The first type is the rotary knob-style electronic gear shift: After starting the vehicle, the gear shift knob installed on the center console will slowly rise. When the engine is turned off, the gear shift knob will automatically lower, forming a flat surface with the center console. To select a gear, simply rotate the knob to switch between P, R, N, D, and S gears. 2. The second type is the button-style electronic gear shift: The button-style electronic gear shift module is neatly installed on the center console or the left side. To select a gear, press the corresponding button for the desired gear, eliminating the need for any other complicated operations. 3. The third type is the electronic gear lever-style shift: This electronic gear lever is also installed on the center console. To engage the P gear, press the P button on the gear lever. To engage the D gear, press the lock button on the left side of the gear lever and pull it downward once, and the instrument panel will display the D gear mode. To engage the R gear, press the lock button on the left side of the gear lever and push the lever upward slightly, and the R gear will be engaged.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.